Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T |
| Supply Ability | 15 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Standard Exporting Plywood Case |
| Applied standard | IEC 68-2-1 |
| Inner chamber size | Customized |
| Humidity range | 20%～98%RH |
| Temperature range | A:-20～+150℃ B:-40～+150℃ C:-70～+150℃ |
| Rising rate | About 3℃/min |
| Cooling rate | Average 1.0℃ |
| Inner chamber material | SUS304 stainless steel plate |
| Temperature uniformity | ±2.5%RH (no load) |
| Brand Name | Sinuo |
| Model Number | SN881 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
ISO 4892 UV Weatherproof Accelerated Aging Environmental Test Chamber
ASTM G154 UV UVA340 Lamp Weathering Aging Test Chamber Programmable
IEC60068 Environmental Test Chamber Stainless Steel Board Xenon Lamp Simulating
IEC60529-2013 Fig 2 IP5X IP6X Sand Dust Environmental Test Chamber 1000L
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 15 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Standard Exporting Plywood Case |
| Applied standard | IEC 68-2-1 | Inner chamber size | Customized |
| Humidity range | 20%～98%RH | Temperature range | A:-20～+150℃ B:-40～+150℃ C:-70～+150℃ |
| Rising rate | About 3℃/min | Cooling rate | Average 1.0℃ |
| Inner chamber material | SUS304 stainless steel plate | Temperature uniformity | ±2.5%RH (no load) |
| Brand Name | Sinuo | Model Number | SN881 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Programmable Constant Temperature Humidity Test Chamber ，IEC 68-2-1 Humidity Test Chamber ，SUS304 Humidity Test Chamber | ||
IEC 68-2-1 Programmable Constant Temperature and Humidity Test Chamber
Brief Introduction:
This Programmable Constant Temperature and Humidity Test Chamber conforms to the standard requirements of IEC68-2-1 Test A: Cold; IEC 68-2-2 Tests B:Dry heat; MIL-STD.202F; MIL-STD-810D; IEC 68-2-3 Test Ca: Damp heat, steady state; IEC 68-2-30 Test Db: Damp heat, cyclic; MIL-STD-810D and etc. This test chamber is used to test the adaptability of electrical appliance, food, automobile, rubber and plastics, metal and other products under the high-low temperature and alternating damp-heat environments. It is mainly to test the cold resistance, heat resistance, heat resistance, humidity resistance, dry resistance of the sample.
Technical Parameters:
| Model | TL-HW-80 | TL-HW-150 | TL-HW-225 | TL-HW-408 | TL-HW-800 | TL-HW-1000 |
| Inner chamber size mm (W*H*D), customized | 400*500*400 | 500*600*500 | 500*750*600 | 600*850*800 | 1000*1000*800 | 1000*1000*1000 |
| Outer chamber size mm (W*H*D) | 600*1650*1200 | 700*1760*1545 | 700*1910*1625
| 800*2010*1845 | 1200*2035*1850 | 1200*2035*2050 |
| Temperature range | A:-20～+150℃ B:-40～+150℃ C:-70～+150℃ | |||||
| Humidity range | 20%～98%RH | |||||
| Temperature variation | ±2℃ | |||||
| Temperature uniformity | ±2℃ | |||||
| Temperature fluctuation | ±0.5℃ | |||||
| Rising rate | About 3℃/min (non-linear, no load) | |||||
| Cooling rate | Average 1.0℃/min (non-linear, no load) | |||||
| Humidity variation | ±3.0％RH(＞75％RH)；±5.0％RH(≤75％RH) | |||||
| Humidity uniformity | ±3.0%RH (no load) | |||||
| Temperature uniformity | ±2.5%RH (no load) | |||||
| Inner chamber material | SUS304 stainless steel plate | |||||
| Outer chamber material | A3 cold-rolled steel plate electrostatic double-sided spraying/SUS304 stainless steel | |||||
| Refrigerating method | Air-cooled compressor (adopt French TECUMSEH fully enclosed compressor) | |||||
| The refrigerant | R404a, R23 | |||||
| Temperature and humidity sensor | A grade PT100 platinum resistance | |||||
| Heater | Nickel-chromium alloy electric heating heater | |||||
| Humidifier | Adopt external humidification, the humidification tube adopts U-shaped design and over-temperature probe hole | |||||
| Power supply | 220V±10%V/ 380V±10%V；50Hz | |||||
| Protection system | Power supply phase loss and phase sequence error protection, water shortage automatic alarm protection, leakage protection, heater over temperature protection, heater short circuit and other overcurrent protection | |||||
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!