Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets / Month |
| Delivery Time | 30 days |
| Packaging Details | Standard Exporting Plywood Case |
| Heating Rate | 0.7～1.0℃/min |
| Cooling Rate | RT to 10℃≤20 min / Non-linear |
| Temperature Range | 0~70℃ |
| Humidity Range | 40%～75%R·H |
| Temperature Fluctuation | ≤±0.5℃ |
| Temperature Uniformity | ≤±2℃ |
| Gas Flow Rate | 60cm/S |
| Holder Rotating Speed | 1～5 rpm |
| Brand Name | Sinuo |
| Model Number | SN8813-225L |
| Certification | Calibration Certificate(cost additional ) |
| Place of Origin | China |
View Detail Information
Explore similar products
ISO 4892 UV Weatherproof Accelerated Aging Environmental Test Chamber
ASTM G154 UV UVA340 Lamp Weathering Aging Test Chamber Programmable
IEC60068 Environmental Test Chamber Stainless Steel Board Xenon Lamp Simulating
IEC60529-2013 Fig 2 IP5X IP6X Sand Dust Environmental Test Chamber 1000L
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets / Month |
| Delivery Time | 30 days | Packaging Details | Standard Exporting Plywood Case |
| Heating Rate | 0.7～1.0℃/min | Cooling Rate | RT to 10℃≤20 min / Non-linear |
| Temperature Range | 0~70℃ | Humidity Range | 40%～75%R·H |
| Temperature Fluctuation | ≤±0.5℃ | Temperature Uniformity | ≤±2℃ |
| Gas Flow Rate | 60cm/S | Holder Rotating Speed | 1～5 rpm |
| Brand Name | Sinuo | Model Number | SN8813-225L |
| Certification | Calibration Certificate(cost additional ) | Place of Origin | China |
| High Light | Ozone Aging Climate Test Chamber ，225L Climate Test Chamber ，IEC 60502-1 Climate Test Chamber | ||
IEC 60502-1 Rubber Resistance To Ozone Aging Climate Test Chamber 225L
Product information For Rubber Resistance To Ozone Aging Climate Test Chamber:
This ozone aging test chamber is required by IEC 60502 -1 clause 18.10, IEC 60811-403 (method A) and EN 50396 clause 8.1.3 (method B), EN/IEC 60811-512, IEC60840 clause 12.5.9, IEC 62067 clause 12.5.9, ASTM D1149, D1171, D3041 / ASTM D470, D1352, D1373, and etc.
It is used for rubber products such as rubber, thermoplastic rubber, cable insulation jacket and other products, under static tensile deformation, exposure to airtight enclosed atmosphere with constant ozone concentration and constant temperature chamber, the scheduled time the test sample, from the sample surface cracks or other changes in performance to assess the rubber resistance to ozone aging.
Technical Parameter For Rubber Resistance To Ozone Aging Climate Test Chamber:
| Working area dimensions (mm) | Depth 500 × width 600 × height 750 | |||
| External dimensions(mm) | Depth 1200×width 1020×height 1850 | |||
| Temperature range | 0~70℃ (can be customized) | |||
| Humidity range | 40%～75%R·H (can be customized) | |||
| Temperature fluctuation | ≤±0.5℃ | |||
| Temperature uniformity | ≤±2℃ | |||
| Humidity fluctuation | +2, -3% R•H | |||
| Heating rate | 0.7～1.0℃/min | |||
| Cooling rate | RT to 10℃≤20 min / Non-linear | |||
| Ozone concentration: | 0～500ppm (can be customized) | |||
| Sample holder rotating speed | 1～5 rpm (adjustable) | |||
| Gas flow rate | 60cm/S | |||
| Sample holder type | 3 groups of static stretching and 3 groups of dynamic stretching | |||
| Ozone concentration analyzer | Imported concentration analysis regulator 4~20mA output | |||
| Ozone generator | Silent discharge tube type | |||
| Inner chamber material | Stainless steel | |||
| External chamber matetial | Painted cold rolled sheet | |||
| Power & voltage | Match client’s local power grid requirements | |||
Refrigerating system For Rubber Resistance To Ozone Aging Climate Test Chamber:
1. Compressor: fully enclosed French Tecumseh unit;
2. Refrigeration mode: stand-alone compression refrigeration;
3. Refrigerant: R404A, R23 (environmental friendly);
4. The pipelines of the whole system are tested for venting and pressurizing 48H
5. The heating and cooling systems are completely independent;
6. Inner spiral refrigerant copper pipe;
7. Slope evaporator.
Chamber structure For Rubber Resistance To Ozone Aging Climate Test Chamber:
1. The chamber body is made of high-quality (t=1.2mm) A3 steel plate, and the surface is sprayed with plastic, which is more smooth and beautiful;
2. The studio adopts high quality (SUS304) mirror stainless steel plate;
3. Insulation material: high-density glass fiber cotton with a thickness of 100mm;
4. Stirring system: adopt long-axis fan motor, high and low temperature resistant stainless steel multi-wing impeller, to achieve strong convection and vertical diffusion circulation;
5. A double-layer high-temperature-resistant high-tensile sealing strip is used between the door and the chamber to ensure the tightness of the test area;
6. The bottom of the machine adopts high-quality fixed PU movable wheels;
7. The observation window is made of multi-layer hollow tempered glass with a laminated conductive film on the inside;
9. Built-in 360-degree rotating sample holder (rotating speed 1 revolution per minute);
10. Install the rotating test sample rack in the working room (1 floor × 6).
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!