Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 20 Sets Per Month |
| Delivery Time | 10 days |
| Packaging Details | Plywood |
| Power Supply | 230V±10%,50Hz |
| Number of Test | 1~999999 |
| Rate of Abrading | 30±1 |
| Load | 4-0.1N |
| Test Station | One station |
| Warranty | Free warranty |
| Brand Name | Sinuo |
| Model Number | BF2128 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
High Voltage Insulation Flash Tester
50KVA Automatic Voltage Stabilizer Three Phase
Glow Wire Test Apparatus Included ‘’Inner Build - In '' Fume Hood
IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N
Product Specification
| Payment Terms | T/T | Supply Ability | 20 Sets Per Month |
| Delivery Time | 10 days | Packaging Details | Plywood |
| Power Supply | 230V±10%,50Hz | Number of Test | 1~999999 |
| Rate of Abrading | 30±1 | Load | 4-0.1N |
| Test Station | One station | Warranty | Free warranty |
| Brand Name | Sinuo | Model Number | BF2128 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Apparatus For Abrasion Test Insulating Sleeves ，Apparatus For Abrasion Test Plug Pin | ||
Apparatus for Abrasion Test on Insulating Sleeves of Plug Pin
Product Information:
The test apparatus is designed and manufactured according to the standard requirement of IEC 60884-1:2013 clause 24 Figure 28. It is used to test the abrasion resistance of the insulating bushing of the bolt.
This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of steel wire, 1 mm in diameter and bent into a U-shape, the base of the U being straight, is rigidly attached, at both ends, to one end of the beam, so that the straight part projects below the beam and is parallel to the axis of the beam pivot.
The plug is held by a suitable clamp in such a position that the straight part of the steel wire rests on the plug pin, perpendicular to it. The pin slopes downwards at an angle of 10° to the horizontal. The beam is loaded so that the wire exerts a force of 4 N on the pin.The plug is moved backwards and forwards in a horizontal direction in the plane of the axis of the beam, so that the wire rubs along the pin. The length of the pin thus abraded is approximately 9 mm, of which approximately 7 mm is over the insulating sleeve. The number of movements is 20 000 (10 000 in each direction) and the rate of operation is 30 movements per minute. The test is made on one pin of each specimen. After the test, the pins shall show no damage which may affect safety or impair the further use of the plug, in particular, the insulating sleeve shall not have punctured or rucked up.
Technical Parameters:
| Power Supply | Single-phase 230V±10%,50Hz |
| Number of Test | 1~999999 |
| Rate of Abrading | 30±1 movements per minute |
| Load | 4-0.1N |
| Number of Test Station | One station |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!