Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood |
| Power supply | AC380V, 50HZ, 35KW |
| Water supply pump | Stainless steel |
| Pressure sensor | 0.5 class |
| Test time | 0-99H99M99S |
| Safety pressure | 0.55 MPa |
| Samples dimensions | 500 X 500 X 500 mm |
| Sample placement | Carrying 50KG |
| Free warranty | 1 year |
| Brand Name | Sinuo |
| Model Number | SN4411-50M |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Hand - Held Protection Against Water Jets IPX5 IPX6 6.3 Mm Or 12.5 Mm
IEC 60529 Wall Mounted IPX1 And IPX2 Vertical Drip Box Testing Equipment
IEC 60529 Hand Held IPX3 And IPX4 Spray Nozzle With Digital Flowmeter
IPX5 IPX6 Ф6.3 Or 12.5 mm Hose Nozzle For Protection Against Water Jets Ingress
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Plywood |
| Power supply | AC380V, 50HZ, 35KW | Water supply pump | Stainless steel |
| Pressure sensor | 0.5 class | Test time | 0-99H99M99S |
| Safety pressure | 0.55 MPa | Samples dimensions | 500 X 500 X 500 mm |
| Sample placement | Carrying 50KG | Free warranty | 1 year |
| Brand Name | Sinuo | Model Number | SN4411-50M |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IPX8 Water Ingress Testing Equipment ，IEC 60529 Water Ingress Testing Equipment ，35KW Water Ingress Testing Equipment | ||
IEC 60529 IPX8 Continuous Immersion Water Ingress Test Equipment
Product introduction For IPX8 Continuous Immersion Water Ingress Testing Equipment:
The high pressure water tank is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under continuous immersion in water at degree IPX8 as per IEC 60529:2013.
The water tank is made of stainless steel, the equipment is controlled by PLC, test parameters can be set on the touch screen directly, water supply and pressure are achieved automatically.
This complete set of equipment consists of a comprehensive control cabinet, IPX8 pressure vessel, and a stainless steel stair. The intelligent water supply and control system consists of a water supply tank, a water supply system, and a control system. The test water supply flow is controlled by PLC, frequency converter, and sensors.
Technical Parameters For IPX8 Continuous Immersion Water Ingress Testing Equipment:
| Item | Specifications |
| Equipment power supply | AC380V 50HZ 35KW. |
| Sample placement | Use electric hoist gantry hanger to lift, carrying 50KG. |
| Opening the cover | The screw rod is lifted and moved laterally, and it can be fully opened, which is convenient for placing samples. |
| Double pressure protection | (1) mechanical protection: spring-type safety relief valve; (2) program control: the pressure exceeds the upper limit value of the water pump to stop working and immediately release the pressure. |
| Safety valve protects ultimate pressure | 0.55 MPa. |
| Test time | 0-99H99M99S can be set. |
| The principle of pressurization method | Ｗater pressure pressurization, PLC program control, the current value of pressure is collected from time to time through PLC, the frequency converter controls the pump speed and frequency to pressurize, and the pressure is constant. |
| Water temperature control | 5～30℃ can be controlled, the heating adopts stainless steel heating tube, and the cooling adopts 10HP chiller. |
| Allowable samples with max. dimensions | 500 X 500 X 500 mm |
| Pressurized container | SUS304 stainless steel tank, the diameter of the tank body is 800mm, and the height of the tank body is 1000mm. |
| Stair | Stainless steel stair |
Working environment For IPX8 Continuous Immersion Water Ingress Testing Equipment:
| Use site | The ground is flat, the drainage is smooth, the floor and wall are waterproofed, and a floor drain or drainage ditch is installed Ground load capacity is not less than 300kg / m2 Field is well ventilated No strong vibration around the equipment No flammable, explosive, corrosive substances and dust around the equipment Appropriate use and maintenance space is left around the equipment: Back, left, right, top of the device: 600mm; front of the device: 1000mm |
| Environment conditions | Temperature:5℃～35℃ Relative humidity:≤85% Air pressure:86kPa～106kPa |
| Power supply | AC 380V, 50Hz, must have nature wire |
| Water supply | Tap water / pure water |
| Gas source | User should prepare the air compressor, the recommended output air pressure: 0.6Mpa—0.8Mpa. |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!