Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 100 Sets Per Month |
| Delivery Time | 3 Days |
| Packaging Details | Carton Box |
| Applied Standard | IEC 60529:2013 |
| Spray Nozzle Material | Brass |
| Spray Nozzle Outer Diameter | Ф102mm |
| Spray Nozzle Spherical Diameter | SФ75.5mm |
| Test Flow | 10L/min±5% |
| Measuring Range | 8L/min ~120L/min, digital |
| Moving Shield | Made of aluminum, detachable |
| IP Code | IPX3/4 |
| Brand name | Sinuo |
| Warranty time | One year |
| Brand Name | Sinuo |
| Model Number | SN446B |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Hand - Held Protection Against Water Jets IPX5 IPX6 6.3 Mm Or 12.5 Mm
IEC 60529 Wall Mounted IPX1 And IPX2 Vertical Drip Box Testing Equipment
IEC 60529 IPX8 Water Ingress Testing Equipment Continuous Immersion Stainless
IPX5 IPX6 Ф6.3 Or 12.5 mm Hose Nozzle For Protection Against Water Jets Ingress
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 100 Sets Per Month |
| Delivery Time | 3 Days | Packaging Details | Carton Box |
| Applied Standard | IEC 60529:2013 | Spray Nozzle Material | Brass |
| Spray Nozzle Outer Diameter | Ф102mm | Spray Nozzle Spherical Diameter | SФ75.5mm |
| Test Flow | 10L/min±5% | Measuring Range | 8L/min ~120L/min, digital |
| Moving Shield | Made of aluminum, detachable | IP Code | IPX3/4 |
| Brand name | Sinuo | Warranty time | One year |
| Brand Name | Sinuo | Model Number | SN446B |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IPX4 Spray Nozzle ，IEC 60529 Spray Nozzle ，Digital Flowmeter Spray Nozzle | ||
IEC 60529 Hand-held IPX3 And IPX 4 Spray Nozzle With Digital Flowmeter
Overview:
It meets the requirements of IEC 60529-2013 “Degrees of protection provided by enclosure (IP code)” IPX3 and IPX4, Figure 5.
The spray nozzle is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4.
Technical Parameters:
| Parameters of Spray Nozzle | Outer diameter: Ф102mm, spherical diameter: SФ75.5mm, 1 hole at the center, 2 inner circles of 12 holes at 30° pitch,4 outer circles of 24 holes at 15° pitch, total 121 holes of Ф0.5mm, made of brass. |
| Water Flow | 10L/min±5% adjustable by flow meter (flow meter is not included in this item, should be prepared by user) |
| Pressure | 50～150Kpa, the pressure gauge measuring range: 0～0.25Mpa |
| Moving Shield | Made of aluminum, can be detachable Note: the aluminum moving shield is easy to deform, pay attention during use |
Structure:
This device is manufactured according IEC 60529 figure 5, with a digital flowmeter and a pressure gauge on the handle, it can achieve IPX3 / IPX4 hand-held spraying test by connecting water pipe (water pipe should be prepared by user).
It ensures that the water spraying and splashing speed reaches the standard required value by controlling the water supply flow, make the enclosure of the specimen to be splashed in all directions.
Operation Steps:
Install the water flow meter, water pipe and spray nozzle as above picture shown, and then adjust the handle to open the valve to adjust the water flow to be (10 ± 5%) L / min, and check whether the pressure gauge shows the pressure in the range of 50-150KPa. If the water flow is less than 10 liters, then a booster pump should be installed, please refer to the blow picture.
Waterproof rating for IPX3 test: According to IEC60529 Figure 5, adjust the moving shield to be 30 °(moving to the fourth circle of holes counting from outside to inside).
Waterproof rating IPX4 test: Please remove the moving shield to full open to not cover any holes, in order to make the sample can be splashed in all directions.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!