Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 15 Sets per Month |
| Delivery Time | 1 Month |
| Packaging Details | Plywood |
| Control method | Automatic lifting |
| Sandbag weight | 100kg/Bag |
| Test net size | Diameter of 1mm |
| Test net naterial | Polyester fiber |
| Net load capacity | 5～500 (KG) |
| Load weights type | Steel load set |
| Equipment bracket | SUS304 stainless steel |
| Warranty term | Free warranty |
| Brand Name | Sinuo |
| Model Number | SN9929 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60061-3 Lamp Caps and Holders Gauges for Control of Interchangeability and
Thermal Durability Test Led Testing Equipment Large Luminaires Temperature Aging
IEC 60598-1 PLC Control Led Testing Equipment Luminaries Adjusting Devices 360°
IEC 60598-1 Cu and Zn Test Chain Short-circuit Protection for SELV Parts
Product Specification
| Payment Terms | T/T | Supply Ability | 15 Sets per Month |
| Delivery Time | 1 Month | Packaging Details | Plywood |
| Control method | Automatic lifting | Sandbag weight | 100kg/Bag |
| Test net size | Diameter of 1mm | Test net naterial | Polyester fiber |
| Net load capacity | 5～500 (KG) | Load weights type | Steel load set |
| Equipment bracket | SUS304 stainless steel | Warranty term | Free warranty |
| Brand Name | Sinuo | Model Number | SN9929 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC60598-2-5 Wind Force Test Device ，Road Lamp Wind Force Test Device | ||
IEC 60598-2-5 Road Lamp Wind Force Test Device For Wind Resistance Test
Applied Standards For Road Lamp Wind Force Test Device:
This machine meets the standards of IEC60598-2-3:2011 clause 3.6.3.1, figure 1 IEC60598-2-5 clause 5.6.5.
Application For Road Lamp Wind Force Test Device:
It used to detect the static load test of wind resistance for street lamps outdoors.
Technical parameters For Road Lamp Wind Force Test Device:
| Wind-force simulation sandbag | 100kg/Bag, built-in steel ball (adjustable with various weights), two bags (small sandbags according to the test, 20 small bags with various specifications). |
| Control method | automatic lifting console operation |
| Test net | diameter of 1mm;load weight : 5～500 (KG);material: Polyester fiber; Convenient hook |
| Load weights | Steel load set, chrome plated surface |
| Equipment bracket | SUS304 stainless steel, can bear 300KG load, equipped with a variety of different street lights, tunnel light fixtures and street lamp holders, can be replaced. |
Test principle For Road Lamp Wind Force Test Device:
The working principle is to use a small sandbag to spread evenly on the road lamp under test, or use a net to cover the lamp, and then test the load on the net. This device is suitable for road lampshade wind-force test, equipped with sandbags, test nets, test weights, installation of test bracket, and etc.
Test According To Standard:
1. IEC60598-2-3:2011 clause 3.6.3.1 test
Calculate the load applied to the lamp according to the formula.
Set test time 10min.
Press the start button to start the measurement, the disc on the right falls off the load and starts timing, and when the time is up, the disc rises to lift the load.
After the test is completed, there should be no visible damage that compromises safety, the permanent deformation of the attachment should not exceed a slope of 2 cm/m, and there should be no rotation around the attachment.
2. IEC60598-2-5 clause 5.6.5 test
For floodlights used above ground outdoors, a constant, evenly distributed load was applied to the floodlights for 10 minutes using sandbags, which provided a floodlight area of 2.4KN per square meter.
Set test time 10min.
Press the start button to start the measurement, the disc on the right falls off the load and starts timing, and when the time is up, the disc rises to lift the load.
Place the floodlight on a vertical plane, rotate 180° around the attachment point, and repeat the test.
During the test, there shall be no failure or movement in the vicinity of the connection point, and no permanent deformation of more than 1° after any part of the test.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!