Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T |
| Supply Ability | 20 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood |
| Test station | Single |
| Drive mode | Electric + eccentric wheel mechanism |
| Test speed | 5-30 times/min, adjustable |
| Rubber pad | 5mm thick, hardness 50±10 Shore |
| Sample fixture | Set of single-handle fixing jig, 1 set of double-handle fixing hook |
| Lifting height of the level surface | 300mm |
| Brand Name | Sinuo |
| Model Number | SN1604 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 20 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Plywood |
| Test station | Single | Drive mode | Electric + eccentric wheel mechanism |
| Test speed | 5-30 times/min, adjustable | Rubber pad | 5mm thick, hardness 50±10 Shore |
| Sample fixture | Set of single-handle fixing jig, 1 set of double-handle fixing hook | Lifting height of the level surface | 300mm |
| Brand Name | Sinuo | Model Number | SN1604 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | BS EN 12983-1 Cookware Testing Equipment ，Cookware Testing Equipment For Handle Fatigue | ||
BS EN 12983-1 Cookware Testing Equipment For Handle Fatigue Testing
Standards for Cookware Handle Fatigue Tester:
The design of the handle fatigue resistance test apparatus of cookware complies with BS EN 12983-1:2020 clause 7.6 and Appendix E.
Product information for Cookware Handle Fatigue Tester:
Used for fatigue test of cooker handles. The handle assembly shall withstand 15,000 cycles without permanent deformation or loosening of the handle or connecting parts. Deformations from the end up to 5% of the total length can be ignored without compromising safety and performance.
Technical parameters for Cookware Handle Fatigue Tester:
| Test station | Single |
| Drive mode | Electric + eccentric wheel mechanism |
| Test speed | 5-30 times/min, adjustable |
| Rubber pad | 5mm thick, hardness 50±10 Shore |
| Sample fixture | set of single-handle fixing jig, 1 set of double-handle fixing hook |
| Lifting height of the level surface | 300mm |
| Test weight | One of each 2kg, 1kg, 500g |
| Counter | 0-999999 times can be set |
| Power supply | AC220V, 50HZ |
| Equipment dimensions | L1000mm*W450mm*H1210mm |
| Weight | 135kgs |
Use method for Cookware Handle Fatigue Tester:
1. First, place the instrument in a level place on a flat table.
2. Test the specimen for resistance to heating in advance according to BS EN 12983-1 Annex B.
3. Grip the handle of the cooker with a suitable clamp.
4. adjust the "angle adjustment knob," so that the bottom of the cooker and the rising platform plane parallel, adjust the "lifting hand wheel," so that the rising platform plane from the bottom of the cooker 1mm. If some cookers are very short, and the lifting platform is more than 1mm from the bottom of the cooker after lifting to the highest position, the operator should remove the plane of the lifting platform, increase the raising rod to raise the lifting platform, and then install the plane of the lifting platform.
5. Place a 5mm thick rubber pad between the surface of the lift platform and the bottom of the cooker.
6. Place a weight that simulates the weight of the water into the cooker.
Set the counter to 150 × 100 (coefficient), press the "start" button, rotate the "speed control" button, so that the tachometer shows 25, the equipment automatically drives the cooker to reciprocate at a speed of 25 times / minute, and when it reaches 15000 times, the equipment automatically stops.
8. At the end of the test, check the cooker handle for permanent damage and the fasteners for looseness.
9. Draw conclusions after testing.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!