Hydropower Station Double Girder Overhead Cranes 50-560t Electric Motorized

Product Specification

Hydropower Station, heavy double-girder bridge crane, overhead crane

Product Description

Hydropower Gantry Crane mounted on the hydropower station crest, used in various large scale water supply and drainage, water conservancy and hydropower engineering and other places. Mainly used for lifting the hydropower station gate to reach the purpose of its open and close, maintenance and repair equipment, cleaning up rivers, etc.
Hydropower Gantry Crane is rarely used, it is light work system level, there are also frequently used hydropower gantry crane is mid work system level, such as the hydropower station crane used for lifting the gate for ship traveling.

​​Drawing and Specification

1) Necessary Info needed from client for offer

● SWL / Load Capacity      ● Span (S)                   ● Max. Lifting Height (H)

● Travel Rail Length           ● Quantity of crane      ● Power Voltage

2) More info needed from client if available

● Workshop Building Drawing or Size       ● Height above H-beam (H1)     

● Height under H-beam (H2)                     ● Remote control or Cabin control

Features:

1. Widly used in hydropower station, river and water conservancy facilities.
2. Especially for FLAT/SLUICE GATE hoisting and lowering.
3. Single or double lifting points on optional.
4. Hoisting slings is wire rope, pulley block falling from drums;
5. Electric motorized, Centralized drive or individual drive.
6. Manual drive assemblied when electric fail.
7. Overload limiter, height indicator are all included. etc.

More displays

FAQ:

1.Is your product customized?

Thanks for your question. Yes, because the working condition are different, all our products are customized depending on detail requirement! So if you give us more information about the lift capacity, span, lift height, power source and other specials, we will give you a very quick and accurate quotation.

2. What’s the information should I provide when inquiry?
Thanks for your question. The more information you provide, the accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, power source or other specials you give us will be more appreciated.

3. How many operating methods for my selection?
Thanks for your question. The standard operating methods we provide is pendent controller with push buttons. Meanwhile, we can also provide the remote control with push buttons and the cabin (space capsule seat) control with joystick. You can choose any of them, just tell us!

4. What’s the max lifting capacity of the crane?
Thanks for your question. The max Lifting capacity of our standard crane are up to 450 ton. If this can’t satisfy your working requirement. Please contact us for special customized.

5. The space of my workshop is limited, can the crane ok for mine?
Thanks for your question. For low headroom workshop, we have the Special products. The detail dimension please consult our professional engineer.

6. Can the crane work in hazardous environment?
Thanks for your question. This type product is just for application in general manufacturing workshop. For hazardous environment, please consult our professional sales manager.

7.Do your side can provide lift tools?
Thanks for your question. Yes, we can provide any kinds of lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement's.