Shenzhen Silvercnc Tech Co., Ltd.
| Payment Terms | T/T, L/C |
| Supply Ability | 500 sets per month |
| Delivery Time | 5-7 work days |
| Packaging Details | cardboard |
| Contact diameter | Ø20mm |
| Surface finishing | Grinding 4s |
| Contact material | Tungsten carbide |
| Stroke | 5mm |
| Repeatability | 0.001(Recommended operating speed of 50 - 200mm/min) |
| Protective structure | IP67 |
| Contact force | 1.5N (Installation position: Vertical) |
| Cable | Oil resistant, standard 5 m (length can be customized)φ4.8 / 6 cores |
| Output mode | NC normally closed (an emergency stop when the signal broken ) |
| Contact rating | DC24V 20 mA resistive load |
| Brand Name | Silvercnc |
| Model Number | M26D-20 |
| Place of Origin | CHINA |
| Certification | ISO9001 |
View Detail Information
Explore similar products
IP68 Tool Setter For Tool Length And Radius Detection
Length Measurement Repeatability 1 μM CNC Tool Setter
CNC Touch Probe For Tool Length / Break Detection
MK-T24E-60 Contact NC CNC Measuring Probe
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 500 sets per month |
| Delivery Time | 5-7 work days | Packaging Details | cardboard |
| Contact diameter | Ø20mm | Surface finishing | Grinding 4s |
| Contact material | Tungsten carbide | Stroke | 5mm |
| Repeatability | 0.001(Recommended operating speed of 50 - 200mm/min) | Protective structure | IP67 |
| Contact force | 1.5N (Installation position: Vertical) | Cable | Oil resistant, standard 5 m (length can be customized)φ4.8 / 6 cores |
| Output mode | NC normally closed (an emergency stop when the signal broken ) | Contact rating | DC24V 20 mA resistive load |
| Brand Name | Silvercnc | Model Number | M26D-20 |
| Place of Origin | CHINA | Certification | ISO9001 |
| High Light | M26D-20 CNC Tool Setter ，Thermal Distortion CNC Tool Setter ，CNC Tool Setter Grinding 4s | ||
Tool setter for cnc machine tool to detect wear and breakage and correct thermal distortion
The tool setting instrument are a high-precision switch (probe), a hard alloy tetrahedron (probe) with high hardness and wear resistance (probe), and a signal transmission connector (other parts omitted).The tetrahedral probe is used to contact the tool and transmit the force to the high-precision switch through the flexible support rod installed under it.The on and off signals sent by the switch are transmitted to the CNC system for tool direction identification, calculation, compensation, access and so on through the signal transmission connector.
Tool setter Features
1. Maintaining high machining accuracy of CNC machining centers.
Corrected tool wear caused by cutting and thermal displacement of the tool length due to differences between daytime and nighttime temperatures by a precision of 1μm.Machining accuracy will be always maintained within tolerance
2. Improve productivity by enhancing net working rate of machine tools.
Detect accidental tool breakage in machining process, and stop the machine.Increase productivity and net working rate by avoiding machining problems in nightlong unmanned operation
3. Prevent defective products.
When the blade is pressed against the contact, high-accuracy signal is output to the CNC or PC.
It is no longer necessary to repeat the process of trial grinding, measurement calculation, and input to the CNC, thereby eliminating the need for expertise in tool setting while also eliminating any concern over damaging the machine due to setting errors
PRODUCT PARAMETERS
| Product name | M26D-20 |
| Contact diameter | Ø20mm |
| Surface finishing | Grinding 4s |
| Contact material | Tungsten carbide |
| Contact structure | NC (Normally closed/open) |
| Pretravel | 0 |
| Stroke | 5mm |
| Repeatability | 0.002(Recommended operating speed of 50 - 200mm/min) |
| Contact life time | 3 million |
| Protective structure | IP67 |
| Contact force | 1.5N (Installation position: Vertical) |
| Cable | Oil resistant, standard 5 m (length can be customized)φ4.8 / 6 cores |
| LED lamp | Default : LED OFF / Operating : LED ON |
| Over travel signal (built-in microswitch) | |
| Output mode | NC normally closed (an emergency stop when the signal broken ) |
| Contact rating | DC24V 20 mA resistive load |
instructions
1. Do not exceed the stroke of the tool cutter, otherwise the tool cutter and the cutter will be damaged.
2. When touching the contact surface of the tool setting instrument, please do not release it immediately, so as not to damage the internal structure of the tool setting instrument.
3. When the tool cutter and the cutter contact is over, the cutter should be lifted vertically away from the contact surface. It is not allowed to move laterally, which will damage the tool cutter.
Product dimessions
Product detail
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company
Year Established:
2013
Total Annual:
4million-7million
Employee Number:
20~50
Ecer Certification：
Active Member
Shenzhen Silvercnc Tech Co.,Ltd founded in 2013,which focus on CNC industry, providing the most suitable CNC machine and related accessories at the best price for our customers. The international trade officially started in 2019,providing products and servic... Shenzhen Silvercnc Tech Co.,Ltd founded in 2013,which focus on CNC industry, providing the most suitable CNC machine and related accessories at the best price for our customers. The international trade officially started in 2019,providing products and servic...
Get in touch with us
Leave a Message, we will call you back quickly!