Shenzhen Silvercnc Tech Co., Ltd.
| Payment Terms | T/T, L/C |
| Supply Ability | 500 sets per month |
| Delivery Time | 5-7 work days |
| Packaging Details | cardboard |
| Contact diameter | Ø20mm |
| Surface finishing | Grinding 4s |
| Contact material | Tungsten carbide |
| Stroke | 12mm |
| Repeatability | 0.002(Recommended operating speed of 50 - 200mm/min) |
| Protective structure | IP67 |
| Contact force | 2.5N (Installation position: Vertical) |
| Cable | Oil resistant, standard 5 m (length can be customized)φ4.8 / 6 cores |
| Output mode | NC normally closed (an emergency stop when the signal broken ) |
| Contact rating | DC24V 20 mA resistive load |
| Brand Name | Silvercnc |
| Model Number | MK-T24E-20 |
| Place of Origin | CHINA |
| Certification | ISO9001 |
View Detail Information
Explore similar products
IP68 Tool Setter For Tool Length And Radius Detection
Length Measurement Repeatability 1 μM CNC Tool Setter
CNC Touch Probe For Tool Length / Break Detection
MK-T24E-60 Contact NC CNC Measuring Probe
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 500 sets per month |
| Delivery Time | 5-7 work days | Packaging Details | cardboard |
| Contact diameter | Ø20mm | Surface finishing | Grinding 4s |
| Contact material | Tungsten carbide | Stroke | 12mm |
| Repeatability | 0.002(Recommended operating speed of 50 - 200mm/min) | Protective structure | IP67 |
| Contact force | 2.5N (Installation position: Vertical) | Cable | Oil resistant, standard 5 m (length can be customized)φ4.8 / 6 cores |
| Output mode | NC normally closed (an emergency stop when the signal broken ) | Contact rating | DC24V 20 mA resistive load |
| Brand Name | Silvercnc | Model Number | MK-T24E-20 |
| Place of Origin | CHINA | Certification | ISO9001 |
| High Light | MK-T24E-20 Tool Setter ，20mm CNC Tool Setter ，CNC Tool Setter Normally Open | ||
Contact tool setter Maintaining machining accuracy of CNC machine tools Normally Open
Tool setter description
In the processing of the workpiece, the workpiece loading , tool adjustment and other auxiliary time, accounting for a large proportion of the processing cycle, which tool adjustment is time-consuming and laborious, and not easy to accurate, and finally need to test cutting.Statistics show that the processing of a workpiece, pure maneuvering time only accounts for about 55% of the total time, clamping and the auxiliary time of the knife accounted for 45%.Therefore, the dao instrument shows great superiority.
Tool setter function
1, The offset value of cutter was measured and compensated in the five directions of ±X, ±Z and Y axis.
2, Automatic monitoring, alarm and compensation for tool wear or damage during machining,
3, Compensation for the variation of tool bias caused by thermal deformation of machine tool.
The advantages of Silvercnc Tool setter
1. The internal chips and contacts of the cutter are completely imported from Japan
2. Waterproof: IP68 submarine-class waterproof
3. The tool surface is made of superhard material and ground with mirror surface
4. The cable is oil resistant and corrosion resistant
5. The base is made of stainless steel, which can be fixed for a long time without deformation
PRODUCT PARAMETERS
| Product name | MK-T24E-20 |
| Contact diameter | Ø20mm |
| Surface finishing | Grinding 4s |
| Contact material | Tungsten carbide |
| Contact structure | NC (Normally open) |
| Pretravel | 0.5mm |
| Stroke | 12mm |
| Repeatability | 0.002(Recommended operating speed of 50 - 200mm/min) |
| Contact life time | 3 million |
| Protective structure | IP67 |
| Contact force | 2.5N (Installation position: Vertical) |
| Cable | Oil resistant, standard 5 m (length can be customized)φ4.8 / 6 cores |
| LED lamp | Default : LED OFF / Operating : LED ON |
| Over travel signal (built-in microswitch) | |
| Output mode | NC normally closed (an emergency stop when the signal broken ) |
| Contact rating | DC24V 20 mA resistive load |
instructions
1.Do not exceed the stroke of the tool cutter, otherwise the tool cutter and the cutter will be damaged.
2.When touching the contact surface of the tool setting instrument, please do not release it immediately, so as not to damage the internal structure of the tool setting instrument.
3.When the tool cutter and the cutter contact is over, the cutter should be lifted vertically away from the contact surface. It is not allowed to move laterally, which will damage the tool cutter.
Product dimessions
Product detail and application
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company
Year Established:
2013
Total Annual:
4million-7million
Employee Number:
20~50
Ecer Certification：
Active Member
Shenzhen Silvercnc Tech Co.,Ltd founded in 2013,which focus on CNC industry, providing the most suitable CNC machine and related accessories at the best price for our customers. The international trade officially started in 2019,providing products and servic... Shenzhen Silvercnc Tech Co.,Ltd founded in 2013,which focus on CNC industry, providing the most suitable CNC machine and related accessories at the best price for our customers. The international trade officially started in 2019,providing products and servic...
Get in touch with us
Leave a Message, we will call you back quickly!