MINGCHENG GROUP LIMITED

China,Dongguan ,Guangdong
Verified Supplier

Send Email



Leave a Message

we will call you back quickly!

Submit Requirement

Home>
Platinum Cure Silicone Rubber>
Addition Silicone Rubber For Cake Decoration Molds

China Addition Silicone Rubber For Cake Decoration Molds





Addition Silicone Rubber For Cake Decoration Molds

MOQ： 100kg
Price： ≥100kg USD 6.58/kg, ≥480kg USD 6.38/kg, ≥640kg USD 5.98/kg.
Get Latest Price


Payment Terms	L/C, T/T, Western Union, PayPal
Supply Ability	4000kg/day
Delivery Time	3-15 working days after payment
Packaging Details	20kg/drum; 25kg/drum; 200kg/drum.
Color	Translucent
Viscosity	7000-9000 cps
Mix ratio	1:1
Working time(at 25℃ ,minutes)	30-40
Curing time(at 25℃,hrs,approx.)	4-6
Hardness Shore A(after 24 h)	10
Tensile Strength(Mpa,after 24 h)	3.8-4.0
Elongation(%)	580-600
Tear Strength(N/mm)	15-17
Linear Shrinkage (%)	≤0.1
Brand Name	MC Silicone
Model Number	MCPLA-L10
Certification	MSDS
Place of Origin	China

View Detail Information

Contact Now Ask for best deal

Get Latest Price Request a quote

Explore similar products

White Two Part RTV2 Platinum Cure Silicone Rubber Good Flowability

Get Latest Price
Translucent Odorless Soft Skin Safe Platinum Silicone For Making Candle Soap

Get Latest Price
10:1 40 Shore A Transparent Addition Cure RTV-2 Liquid Silicone Rubber For

Get Latest Price
Two Parts RTV Polyaddition Platinum Cure Silicone Rubber For Resin Arts And

Get Latest Price

Product Details
Company Details

Product Specification


Payment Terms	L/C, T/T, Western Union, PayPal	Supply Ability	4000kg/day
Delivery Time	3-15 working days after payment	Packaging Details	20kg/drum; 25kg/drum; 200kg/drum.
Color	Translucent	Viscosity	7000-9000 cps
Mix ratio	1:1	Working time(at 25℃ ,minutes)	30-40
Curing time(at 25℃,hrs,approx.)	4-6	Hardness Shore A(after 24 h)	10
Tensile Strength(Mpa,after 24 h)	3.8-4.0	Elongation(%)	580-600
Tear Strength(N/mm)	15-17	Linear Shrinkage (%)	≤0.1
Brand Name	MC Silicone	Model Number	MCPLA-L10
Certification	MSDS	Place of Origin	China

Addition Silicone Rubber For Cake Decoration Molds

Description of Addition Silicone Rubber For Cake Decoration Molds

MC Silicone MCPLA Addition Cure Series is a two component elastomeric cross-linking at room temperature. The polymerization can be accelerated by heat (max.1500 C). The silicone components are delivered as liquids, which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.

Features of Addition Silicone Rubber For Cake Decoration Molds

Good flowability High tear and tensile strength Long shelf life with low shrinkage Fast mixing Easy processing due to the low viscosity

Applications

Label manufacturing, Molding applications requiring low shrinkage e.g., jewelry, automotive, plaster, cement decorations, toys and dolls, etc.

Applications of Addition Silicone Rubber For Cake Decoration Molds

Label manufacturing, Molding applications requiring low shrinkage e.g., jewelry, automotive, plaster, cement decorations, toys and dolls, etc.

Technical Properties of Addition Silicone Rubber For Cake Decoration Molds

Item No.	MCPLA-L10A/B
Color	Translucent/can be customized
Viscosity ( cps,approx.)	7000-9000
Mix ratio (A:B)	1:1
Working time(at 25℃ ,minutes)	30-40 (can be adjusted)
Curing time(at 25℃,hrs,approx.)	4-6 (can be adjusted)
Hardness Shore A(after 24 h)	10
Tensile Strength(Mpa,after 24 h)	3.8-4.0
Elongation(%)	580-600
Tear Strength(N/mm)	15-17
Linear Shrinkage (%)	≤0.1

Processing and Instructions of Addition Cure Silicones

1. Mixing the two components

According the mixing ration 1:1 weighting A and B, the two components may be thoroughly mixed either by hand or using a low-speed electric to minimize the degassing of bubbles and to avoid any temperature increase. Note: It is also possible to use a special mixing and dispensing machine for the silicone components, further information is available upon request.

2. Moulding

The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3-4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure. Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter/height ratio (3 to 4 times of the initial volume)

3. Polymerisation

The curing may be slowed down at lower temperature or accelerated by applying heat. Note: in general contact with certain materials can inhibit the cross linking of RTV.

 Natural rubbers vulcanized with sulfur

 RTV silicone compound catalyzed with metal salts, e.g. Tin compounds

 PVC stabilized with tin salts and additives

 Epoxy catalyzed with amines

 Certain organic solvents, e.g. Ketones, alcohols, etc.

Packaging of Addition Silicone Rubber For Cake Decoration Molds

20kg per drum, 200kg per drum.

Storage and shelf life of Addition Silicone Rubber For Cake Decoration Molds

MC Silicone MCPLA Series should be used within 12 months from the manufacturing date. Beyond this date, MC silicone no longer guarantees the products confirms with the sales Specification.To preserve best properties, please followthe recommended guild lines. Store the original packing tightly sealed and at a temperature below 30 degree Celsius. Use the product as soon as the packaging has been opened.

Company Details

Bronze Gleitlager

Bronze Sleeve Bushings

and

Graphite Plugged Bushings

from Quality China Factory



Business Type:

Manufacturer,Exporter,Seller 


Year Established:

2010 


Total Annual:

5000000-10000000


Employee Number:

50~80 


Ecer Certification：

Verified Supplier 

Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ... Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ...

+ Read More

Reach Us
MINGCHENG GROUP LIMITED
No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China
https://www.siliconeliquidrubber.com/

Send Email

Leave a Message, we will call you back quickly!