MINGCHENG GROUP LIMITED
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 4000kg per day |
| Delivery Time | 3-5 working days after payment |
| Packaging Details | 20kg per drum |
| Product Name | Polyurethane Rubber |
| Hs Code | 3909500000 |
| Color | Off white |
| Hardness | 80 shore A |
| Viscosity | 1500 cps |
| Mix Ratio | 1:1 |
| Gel time | 8-14 mins |
| Curing time | 16-24 hours |
| Applications | Molding and casting |
| Shelf life | 6 months |
| Brand Name | MC |
| Model Number | MC-PU80 AB |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
2500cps RTV Clear Polyurethane Liquid Plastic For Molds Auto Parts
70 Shore A Good Flowability Low Shrinkage Polyurethane Liquid Plastic For Shoe
High Hardness PU Polyurethane Casting Resin Plastic For Industrial Parts Molding
Durable RTV Polyurethane Liquid Plastic Resin For Making Rubber Rolls Industrial
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 4000kg per day |
| Delivery Time | 3-5 working days after payment | Packaging Details | 20kg per drum |
| Product Name | Polyurethane Rubber | Hs Code | 3909500000 |
| Color | Off white | Hardness | 80 shore A |
| Viscosity | 1500 cps | Mix Ratio | 1:1 |
| Gel time | 8-14 mins | Curing time | 16-24 hours |
| Applications | Molding and casting | Shelf life | 6 months |
| Brand Name | MC | Model Number | MC-PU80 AB |
| Place of Origin | CHINA | ||
| High Light | Fast Curing Polyurethane Liquid Plastic ，Beige Polyurethane Liquid Plastic ，80 Shore D For Making Models | ||
Liquid Polyurethane Elastomer 80 Shore A Urethane Rubber For Making Concrete Stamped Mat
Product Description
Liquid polyurethane plastic casting resin consists of A&B component, B is curing agent, and A is polyurethane prepolymer. It can also be used as a concrete or cement stamping mold as well as for making hard durable rubber parts for machinery or automotive applications.
Polyurethane casting plastics can be cast in silicone mold rubbers without any release agent, but require a release agent when cast in polyurethane rubber molds.
Applications
Substitute for casting props and display items, making the models, product design, casting resin Figures, toys, gift accessories, etc.
Features
Fast forming speed
Easy to paint/color
Fine appearance performance
Tasteless and easy to produce
Good mechanical properties
Technical Datasheet
|
A | Type | MC-PU80A |
| Appearance | Colorless, transparent yellow | |
| Viscosit(y 30℃)mPa·s/ | 1500 cps | |
|
B | Type | MCPU-8017B |
| Appearance | TAN | |
| Viscosity(30℃)/mPa·s | 200 | |
| Ratio A:B(mass ratio) | 1:1 | |
| Operation time | 8-14 minutes | |
| Gel time(30℃)*/min | 16-24 minutes | |
| Curing Appearance | transparent yellow | |
| Hardness (shore A) | 80±3 | |
| Shrinkage rate | 3-5‰ | |
| Usages | for casting concrete stamping | |
|
Shelf life | 6 months from production date in original package | |
Using Instructions
(1) Measurement
The weight mixing ratio of liquid A and liquid B is: 1:1. Use a paper cup or other container to weigh an appropriate amount of liquid A, and then use another paper cup or other container to weigh the same weight of liquid B, liquid A and liquid B Keep the amount consistent. If the weight deviation is too large, the surface of the cured product may not be fully cured or the color of the cured product may deviate.
(2) Mixed
Pour the accurate B solution of the above main method into A solution, and then stir it fully with a metal spatula or a glass rod. If the stirring is not uniform, the surface of the cured product may not be completely cured or the color of the cured product may deviate. Note: The stirring time is preferably 10-20 seconds, because liquid A and liquid B will solidify within 1.5-2 minutes after mixing, so the faster the operation time, the better.
(3) Filling
After fully stirring it, quickly pour it into the silicone mold. If there is a vacuum machine, you can put it into the vacuum machine to remove the water and air in the liquid. After vacuuming, you can get a beautiful product with small shrinkage and no pores.
(4) Demoulding
After vacuuming, place the silicone mold filled with AB water on a flat workbench and wait for 10 to 20 minutes to release the mold. The temperature of the cured product will rise due to the curing reaction heat. Please pay attention to avoid scalding accidents. Early demoulding, high temperature curing may be deformed due to chilling.
Package:20Kg/drum, 200kg drum
Storage:Store in cool and dry place. If you can’t use one drum up at a time, please inject N2.The storage time of original packing is 6 months.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ... Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ...
Get in touch with us
Leave a Message, we will call you back quickly!