MINGCHENG GROUP LIMITED
| Payment Terms | T/T, Western Union |
| Supply Ability | 1000kg per day |
| Delivery Time | 3-5 working days after payment |
| Packaging Details | 500g, 1kg, 5kg, 10kg, 25kg |
| Product Name | Silicone Putty |
| HS Code | 39100000 |
| Color | White/Purple/Blue/Orange |
| Mix Ratio | 1:1 |
| Working time | lessn than 1 minute |
| Curing time | Less than 5 mins |
| Hardness | 65 shore A |
| Shelf Life | 12 months |
| Brand Name | MC |
| Model Number | MC-SP6065 A/B |
| Certification | MSDS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
35 Shore A Fast Set Two-Part Silicone Mold Putty For Making Pads For Horse Hoof
Two Part Fast Set Skin Safe Silicone Mold Putty For Making Ear Plugs
Fast Setting Addition Silicone Dental Impression Material Amazing Mold Putty
Blue 65 Shore A Medcal Grade Dental Impression Silicone Mold Putty
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 1000kg per day |
| Delivery Time | 3-5 working days after payment | Packaging Details | 500g, 1kg, 5kg, 10kg, 25kg |
| Product Name | Silicone Putty | HS Code | 39100000 |
| Color | White/Purple/Blue/Orange | Mix Ratio | 1:1 |
| Working time | lessn than 1 minute | Curing time | Less than 5 mins |
| Hardness | 65 shore A | Shelf Life | 12 months |
| Brand Name | MC | Model Number | MC-SP6065 A/B |
| Certification | MSDS | Place of Origin | CHINA |
| High Light | 65 shore Silicone Mold Putty ，Silicone Mold Putty 65 shore ，1:1 silicone putty impression material | ||
Environmental Non-Toxic 1:1 Mix Ratio Fast Set Two-Part Silicone Mold Putty For Dental Impression Use
Product Description
Silicone Putty is ideal for a wide range of impression type mold applications, including Castin’Craft Clear Casting Resin, EasyCast Clear Casting Epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals! EasyMold is a easy to use, Odor Free, Non-Toxic, Food Grade, two component silicone putty, whichdoes not shrink and remains resilient throughout the life of application.
Fast Curing and Durable
Our putty is non-toxic and odor free. It will handle heat up to 450 F.
Self-releasing – no mold release agent required for most applications. Long shelf life, no shrinkage. Not intended for food contact applications.
Physical Properties:
| Before Curing | Catalyst Components | Base Components |
| Appearance | White putty | Blue putty |
| Mix ratio | 1:1 | |
| Pot life | <1 minute | |
| Curing time(37C) | <5minutes | |
| After Curing | ||
| Hardness(Shore A) | 65 | |
| Permanent deformation % | <0.2% | |
| Dimensional stability % | <0.25 | |
| Copy details(μm) | <1.5 | |
| Tearing Strength Mpa4 | 2.0 | |
| Elongation% | 267 | |
Usage Instruction
1. Under the room temperature, take the same amount of base component (blue) and catalyst component (white).
2. Mix the two components together. It is recommended to use the blue spoon to take the base component and white spoon to take catalyst component.
3. Use your fingertips to mix the two components together and knead for at least 30 seconds until they are mixed completely.
4. Close the lid immediately
after usage, the cover can not be interchanged.
Package
500g, 1kg, 5kg, 10kg, 25kg
Why choose MC silicone putty?
Skin-safe
Non-toxic - contains no nasties
Fast Cure - sets within 30 minutes
Easy - you don't even need to weigh it... just take out two equal looking amounts of putty from the tubs
No mould box needed - this putty can be used on vertical surfaces, 3d items and even on your toes (if that's your kind of thing)
Vegan-friendly & cruelty-free
Precautions
1. Do not use natural rubber gloves. It is recommended to use disposable polyethylene plastic gloves.
2. The product contains platinum catalyst, sulfur, phosphorus, amine, etc. will slow down or even stop the curing reaction, and thus it must avoid sulfur, phosphorus, amine, acrylic and meth acrylic acid esters and other chemical products in use.
3. Close the lid tightly and immediately after use, keep it in cool place, and be refrigerated in summer.
4. The temperature has a significant impact on the curing time; the curing reaction will slow down at low temperature, and speed up at high temperature curing speed. It should adjust operation rhythm according to the environment and the finger temperature.
5. It is strictly recommended to use the same amount of base and catalyst. Unequal amount will lead to delayed or accelerated cure.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ... Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ...
Get in touch with us
Leave a Message, we will call you back quickly!