MINGCHENG GROUP LIMITED
| Payment Terms | L/C, , T/T, Western Union, PayPal , |
| Supply Ability | 4000kgs/day |
| Delivery Time | 5-10 working days |
| Packaging Details | 25kg/drum , 200kg/drum |
| Product name | prices tin cure RTV2 liquid silicone rubber |
| Color | White liquid silicone rubber |
| Curing agent | CA30 |
| Mixing ratio | 100:2 |
| Hardness | 20 shore A |
| Mixed Viscosity | 16000-19000 |
| Working time | 30-40mins |
| curing time | 4~6hrs |
| Tear Strength | 3.0MPa |
| Tensile Strength | 23n/mm |
| Shrinkage | 0.3% |
| shelf life | 12 months |
| Brand Name | MC SILICONE |
| Model Number | MCSIL-3020 |
| Certification | MSDS, Reach |
| Place of Origin | China |
View Detail Information
Explore similar products
General Purpose Tin Cured Rtv2 Liquid Silicone Mold Rubber For Resin Castings
White Tin Cure RTV2 Silicone Rubber For Making Rapid Prototyping Molds
High Strength RTV2 Tin Cure Liquid Silicone Rubber For Making Gypsum Statue Mold
White Liquid Tin Cure RTV2 Silicone Rubber For Candle / Soap / Wax Molds Making
Product Specification
| Payment Terms | L/C, , T/T, Western Union, PayPal , | Supply Ability | 4000kgs/day |
| Delivery Time | 5-10 working days | Packaging Details | 25kg/drum , 200kg/drum |
| Product name | prices tin cure RTV2 liquid silicone rubber | Color | White liquid silicone rubber |
| Curing agent | CA30 | Mixing ratio | 100:2 |
| Hardness | 20 shore A | Mixed Viscosity | 16000-19000 |
| Working time | 30-40mins | curing time | 4~6hrs |
| Tear Strength | 3.0MPa | Tensile Strength | 23n/mm |
| Shrinkage | 0.3% | shelf life | 12 months |
| Brand Name | MC SILICONE | Model Number | MCSIL-3020 |
| Certification | MSDS, Reach | Place of Origin | China |
| High Light | RTV2 Liquid Tin Cure Rubber Silicone ，Shoe Molds Tin Cure Rubber Silicone ，Shoe Sole Mould Making Silicone Rubber | ||
Applications
MCSIL-20series RTV2 silicone rubber also can be applied in the reproduction of shoe sole molds and resin products, PU molds. Etc.
Technical Data
| Item No. | MCSIL-3020 |
| Color | White |
| Curing Agent | CA-30 |
| Mixing ratio | 100:2 |
| Mixed Viscosity | 17000cps |
| Working time | 30-40mins |
| Curing time | 6 hours |
| Hardness | 20±2 shore A |
| Tear Strength | 23 N/mm |
| Tensile Strength | 3.0Mpa |
| Shrinkage | ≤0.3% |
| Elongation | 420% |
How to make the silicone mold?
Cleaning
The surface of the original should be clean and free of loose material. If your products with thin flower patterns, and especially with porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.
Mixing
Please weight 100 Part A base and 2 parts of Curing Agent in a clean container.Thoroughly stir Part A base silicone before use, as filler separation may occur upon prolonged storage. Mixing Part A and Part B evenly until the CA30 completely dispersed in the base. Hand or mechanical mixing can be used, but do not for an extended period of time or allow the temperature to exceed 35C (95F). Mix suitably small quantities to ensure thorough mixing of base and curing agent.
It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum,the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should
be chosen.
Pouring
Pour the mixed Part A base silicone and part B the curing agent as soon as possible onto the original, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.
STORAGE
When stored at or below 30 C (85F) in the original unopened containers, silicone base and CA30 Curing agent have a usable life of 12 months from the date of production. After 12 months stock, please use the Stir to mixing the Part A silicone for some mins, then the silicone can be use again, no influence for other performances.
Package:
Part A base silicone: 5kg, 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 250g, 800g/bottle, 1kg/bottle
Note:
Silicone MCSIL series is an industrial product and must not be used in food contact and human skin molding applications.
Certificates
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ... Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ...
Get in touch with us
Leave a Message, we will call you back quickly!