MINGCHENG GROUP LIMITED
| Payment Terms | L/C, , T/T, Western Union, PayPal , |
| Supply Ability | 4000kgs/day |
| Delivery Time | 5-10 working days |
| Packaging Details | 25kg/drum , 200kg/drum |
| Method of molding | pourable silicone |
| Color | White |
| Curing agent | CA30 |
| Mixing ratio | 100:2 |
| Hardness | 28-30 shore A |
| Mixed Viscosity | 24000cps |
| Working time | 30-40mins |
| curing time | 4~6hrs |
| Tear Strength | 3.8 MPA |
| Tensile Strength | 30 N/mm |
| Shrinkage | 0.3% |
| shelf life | 12 months |
| Brand Name | MC SILICONE |
| Model Number | MCSIL-2030 |
| Certification | MSDS, Reach |
| Place of Origin | China |
View Detail Information
Explore similar products
General Purpose Tin Cured Rtv2 Liquid Silicone Mold Rubber For Resin Castings
White Tin Cure RTV2 Silicone Rubber For Making Rapid Prototyping Molds
High Strength RTV2 Tin Cure Liquid Silicone Rubber For Making Gypsum Statue Mold
White Liquid Tin Cure RTV2 Silicone Rubber For Candle / Soap / Wax Molds Making
Product Specification
| Payment Terms | L/C, , T/T, Western Union, PayPal , | Supply Ability | 4000kgs/day |
| Delivery Time | 5-10 working days | Packaging Details | 25kg/drum , 200kg/drum |
| Method of molding | pourable silicone | Color | White |
| Curing agent | CA30 | Mixing ratio | 100:2 |
| Hardness | 28-30 shore A | Mixed Viscosity | 24000cps |
| Working time | 30-40mins | curing time | 4~6hrs |
| Tear Strength | 3.8 MPA | Tensile Strength | 30 N/mm |
| Shrinkage | 0.3% | shelf life | 12 months |
| Brand Name | MC SILICONE | Model Number | MCSIL-2030 |
| Certification | MSDS, Reach | Place of Origin | China |
| High Light | Tin Cure Liquid Silicone Rubber ，Stone Molds Liquid Silicone Rubber ，Artificial Marble Stone Molds Silicone Rubber | ||
DESCRIPATION
Silicone rubber MCSIL-2030 is a two-component material, consisting of Part A base and Part B MCSIL-CA30, cures at room temperature by a condensation reaction.
PRODUCT FEATURES
1. Good flow ability and long working time
2. Excellent performance for duplication
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
6. Low linear shrinkage
Technical Data
| Item No. | MCSIL-2030 |
| Color | White |
| Curing Agent | CA-30 |
| Mixing ratio | 100:2 |
| Mixed Viscosity | 22000cps |
| Working time | 30-40mins |
| Curing time | 6 hours |
| Hardness | 30±2 shore A |
| Tear Strength | 30 N/mm |
| Tensile Strength | 3.8Mpa |
| Shrinkage | ≤0.3% |
| Elongation | 520% |
USING INSTRUCTION
1- Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
2- vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available
3- Pouring mold or block mold of silicone rubber
The pouring way is an easy way to make molds, it's slowly and evenly pour into the mixed silicon rubber into the square frame. After the cross linking reaction.
APPLICATIONS
MC RTV-2 mold making silicone rubber are suited for casting a wide range of materials Polyester/ Polyurethane/ Epoxy resin, gysum/ plater, cemetns/ concrete , wax , Jewelry, Food grade for chocolate, shoe insole, etc.
Package
Part A base silicone: 5kg, 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 250g, 800g/bottle, 1kg/bottle
Certificates
Storage
When the silicone rubber is stored at or below 30 centi degree in the original unopened containers, Silicone Base and Curing agent have a usable life of 10 months from the date of production. After 10 months stockpiles use the Stir to mix the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.
Procedures of mold making by RTV-2 Silicone Rubber
1. Clean and prepare specimen (apply consolidant, sealant, or release agent if necessary).
2. Build retaining wall around specimen.
3. Stir silicone base to loosen any settled material.
4. Decant desired amount of silicone into mixing container.
5. Mix in appropriate amount of catalyst.
6. Apply to specimen.
7. If reinforced mold is desired, gently press in gauze after pouring fist layer.
8. When cured, gently remove mold from specimen.
9. If needed, create rigid backing or jacket over mold with plastic,
urethane foam, or plaster.
10. Remove backing material and mold. Store mold inside rigid backing.
Benefits of MC Silicone
Ease of processing
High resin resistance increasing the number of cast parts
Low linear shrinkage for greater accuracy
Easy release of shapes, including large pieces and complex geometries
High compatibility with water-rich casting materials such as gypsum
Increased compatibility with high performance concrete
Dimensional stability due to very low shrinkage
High mechanical properties over a range of flexibility
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ... Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials. Our professional approach to all our work, together with creative ideas and strong technical ...
Get in touch with us
Leave a Message, we will call you back quickly!