CE OEM Factory Price Tire Rubber Drum Vulcanizer Brand Vulcanizing Machine For

CE OEM Factory Price Tire Rubber Drum Vulcanizer Brand Vulcanizing Machine For Clothes

Fulund vulcanizer maintenance should pay attention to the following issues:
1. The storage environment of the vulcanizer should be kept dry and well ventilated to avoid dampness of electrical circuits due to humidity;
2. Do not use the vulcanizer outdoors in rainy days to prevent water from entering the electric control box and heating plate;
3. If the working environment is humid and watery, when dismantling and transporting the vulcanizing machine, the items should be raised on the ground, and the vulcanizing machine should not be in direct contact with water;
4. If water enters the heating plate due to improper operation during use, you should first contact the manufacturer for maintenance. If emergency repairs are needed, open the cover on the heating plate, pour out the water first, then set the electric control box to manual operation, heat it to 100°C, keep it at a constant temperature for half an hour, dry the circuit, and put it in the Belt gluing is performed manually. At the same time, the manufacturer should be contacted in time for the overall replacement of the line;
5. When the vulcanizer does not need to be used for a long time, the heating plate should be heated every half a month (the temperature is set at 100 ℃), and the temperature should be maintained for about half an hour;
6. After each use, the water in the water pressure plate should be cleaned up, especially in winter, if the water cannot be cleaned, it will often lead to premature aging of the water pressure plate rubber and reduce the service life of the water pressure plate;
The correct way to release the water is to carry out the vulcanization machine after the vulcanization and heat preservation is completed and before the vulcanizer is disassembled. If the water is discharged after the machine is disassembled, the water in the water pressure plate may not be completely drained.

Introduction to the structure of the vulcanizer:

1. Structural stability: a special four-column structure is adopted, the upper seat is reinforced with medium carbon steel, and the upright column is thickened and hardened to ensure structural stability and accuracy.

2. System: The high plane pressure equalization correction is adopted, and the pressure (18mpa) strengthens the nut leveling device, which can increase the parallelism of the upper and lower heating plates to 0.05mm.

3. Temperature control system: Adjustable from room temperature to 350°C, using intelligent temperature control to control the temperature fluctuation range within ±2°C.

4. Operating system: PLC combined with touch screen, whether debugging or production, can be controlled directly and simply.

5. Operating system: The optimally designed oil circuit and high-quality oil circuit accessories ensure the smooth operation of the entire oil circuit system from the principle and accessories.

6. Energy-saving system: The heating plate adopts the deep hole processing technology, which is closely matched with the heating pipe to reduce the heat loss during the heat transfer process.

7. The intelligent system can automatically push out the mold, thereby reducing the labor time of the staff, increasing efficiency, high output and saving time.

Scope of application:

Children's toys, baby products, kitchen supplies, clothing labels, equipment seals, etc.