Changzhou Shinma Drying Engineering Co.,LTD.
| Payment Terms | L/C, D/A, D/P, T/T |
| Supply Ability | 30sets |
| Delivery Time | 60days |
| Packaging Details | nacked packing |
| Name | Fluid Bed Dryer Granulator |
| material | Stainless Steel 304 316 |
| final moisture content | ＜0.2% |
| Weight (KG) | 1200 |
| Applicable Industries | Medicine Processing, Chemicals Processing, Food Processing |
| Marketing Type | Ordinary Product |
| Core Components | PLC, Pressure vessel |
| Voltage | 380V |
| Power | 3-45KW |
| Evaporation Capacity(kg/h) | Evaporate capacity 50-100 |
| Material yield rate (%) | ≥99 |
| Capacity (Kg /batch) | 5-500 |
| Brand Name | shinma |
| Model Number | FL-60 |
| Certification | ISO14001，ISO9001 |
| Place of Origin | changzhou |
View Detail Information
Explore similar products
500KG 45KW Fluidized Bed Granulation Process Vertical Fluid Bed Dryer
60KG Medicine Fluidized Bed Spray Granulation Pharmaceutical Rapid Mixer
120kg 200kg Fluid Bed Dryer Granulator Fbd Pharma Machine SS316
GMP Pharmaceutical fluid bed spray Granulator Fluid Bed Dryer
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T | Supply Ability | 30sets |
| Delivery Time | 60days | Packaging Details | nacked packing |
| Name | Fluid Bed Dryer Granulator | material | Stainless Steel 304 316 |
| final moisture content | ＜0.2% | Weight (KG) | 1200 |
| Applicable Industries | Medicine Processing, Chemicals Processing, Food Processing | Marketing Type | Ordinary Product |
| Core Components | PLC, Pressure vessel | Voltage | 380V |
| Power | 3-45KW | Evaporation Capacity(kg/h) | Evaporate capacity 50-100 |
| Material yield rate (%) | ≥99 | Capacity (Kg /batch) | 5-500 |
| Brand Name | shinma | Model Number | FL-60 |
| Certification | ISO14001，ISO9001 | Place of Origin | changzhou |
| High Light | Environmental Protection Fluid Bed Dryer Granulator ，Fluid Bed Dryer Granulator 200KG ，fluid bed granulator mixer 300KG | ||
FL Series Fluid Bed Dryer Granulator by WANDA - Environmental Protection and Energy Saving
Description:
After air is purified and heated, then it will be introduced from the bottom of induced-draft fan and passed through the screen plate of raw material. In working chamber, the state of fluidization is formed through stirring and negative effect. The moisture is evaporated and removed rapidly and the raw material is dried quickly.
Principle:
The powder granule the container (fluidization bed) appears the state of fluidization. It is preheated and mixed with clean and heated air. At the same time the solution of adhesive solvent is fogged and sprayed into the container. It makes the some particles become granulating that contains adhesive. Being of unceasing dry through hot air, the moisture in the granulating is evaporated and the adhesive is solidification. The process is carried out continuously. Finally it forms ideal, uniform and porous granules.
1.the drying speed is fast. After the centrifugal spray, the specific surface area of the feed liquid is greatly increased, and 95-98% of the water can be evaporated instantly in the high temperature airflow, and the drying time is only a few seconds.
2.the use of concurrent flow spray drying form can make the droplet and hot air flow in the same direction, although the temperature of hot air is higher, but because the hot air into the drying room immediately contact with the spray droplets, indoor temperature drop will not dry the material excessive heat, so it is particularly suitable for the drying of heat-sensitive materials.
3.wide range of use. According to the characteristics of the material, it can be dried by hot air or molded by cold air. Large difference is very big features can use the production, the commonly used are: polymers and resins, dyes, pigments, glass, herbicides, insecticides, carbohydrates, milk egg products, slaughterhouse byproducts, blood and blood products, detergents and surfactants fertilizer, organic compound, inorganic compound, instant food, drugs, etc.
4.because the drying process is completed in an instant, the particles of the product basically keep the approximate spherical droplets, with good dispersion, fluidity and solubility.
5. Simplified production process, convenient operation and control. Spray drying is usually used for the solution with 40-60% wet product content. Even if the content of special materials is up to 90%, it can be dried into powder products at one time. After most products are dried, there is no need for crushing and screening, which reduces the production process, simplifies the production process and improves the purity of the products. The particle size, bulk density and moisture of the product can be adjusted and controlled by changing the operating conditions within a certain range. It's easy to manage.
6.In order to prevent the material from being polluted and prolong the service life of the equipment, all the parts in contact with the material are made of stainless steel. In order to facilitate the operation, the control system adopts integrated operation.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter
Year Established:
2014
Total Annual:
10million-12million
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Changzhou Shinma Drying Engineering Co.,LTD, in jintan district，changzhou city of Jiangsu, which is in the middle of Shanghai-Nanjing Express way. Company has 2 large modern construction machinery manufacturing plants, equipped with whole line of sheet metal bending, laser cutting, automatic polis... Changzhou Shinma Drying Engineering Co.,LTD, in jintan district，changzhou city of Jiangsu, which is in the middle of Shanghai-Nanjing Express way. Company has 2 large modern construction machinery manufacturing plants, equipped with whole line of sheet metal bending, laser cutting, automatic polis...
Get in touch with us
Leave a Message, we will call you back quickly!