Shenzhen Olinkcom Technology Co.,Ltd
| Payment Terms | T/T or Net 30 days |
| Supply Ability | 80-120k per month |
| Delivery Time | 3-5 working days |
| Packaging Details | Individual package Or 10pcs/pallet Or 20pcs/pallet |
| Form Factor | SFP+ |
| Compatibility | Arista Networks |
| Data Rate | 11.3Gb/s bit rates |
| Wavelength | 850nm |
| Distance | 300m |
| Connector | LC duplex |
| DDM/DOM | Supported |
| Fiber type | MMF |
| Temperature | 0~70 °C |
| TX Power | -7.3~-1dBm |
| Brand Name | OLKOPTO |
| Model Number | OLSP851XL-CDS3 |
| Certification | RoHS FCC CE GS UL FDA etc |
| Place of Origin | Shenzhen China |
View Detail Information
Explore similar products
Alcatel Compatible SFP+ ZR 10GBASE 1550nm 80km Transceiver
ODM 1310nm 10km 10G SFP+ Optical Transceiver Duplex LC Connector
Edgecore Compatible 10GBASE-SR SFP+ Transceiver 850nm 300m DOM
Intel Compatible 10G SFP+ Optical Transceiver 1550nm 10GBASE-ER/OC-192
Product Specification
| Payment Terms | T/T or Net 30 days | Supply Ability | 80-120k per month |
| Delivery Time | 3-5 working days | Packaging Details | Individual package Or 10pcs/pallet Or 20pcs/pallet |
| Form Factor | SFP+ | Compatibility | Arista Networks |
| Data Rate | 11.3Gb/s bit rates | Wavelength | 850nm |
| Distance | 300m | Connector | LC duplex |
| DDM/DOM | Supported | Fiber type | MMF |
| Temperature | 0~70 °C | TX Power | -7.3~-1dBm |
| Brand Name | OLKOPTO | Model Number | OLSP851XL-CDS3 |
| Certification | RoHS FCC CE GS UL FDA etc | Place of Origin | Shenzhen China |
| High Light | 850nm 10G SFP+ Optical Transceiver ，300m SFP+ Optical Transceiver ，850nm 10G SFP+ Module | ||
10GBASE-SR 10G SFP+ Optical Transceiver Module 850nm 300m LC Duplex
Arista Networks SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m LC Transceiver
Electrical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Differential data input swing | VINPP | 180 | 700 | mVpp | 1 | |
| Transmit Disable Voltage | VD | VCC-0.8 | Vcc | V | ||
| Transmit Enable Voltage | VEN | Vee | Vee+0.8 | |||
| Input differential impedance | Rin | 100 | Ω | |||
| Receiver | ||||||
| Differential data output swing | Vout,pp | 300 | 850 | mVpp | 2 | |
| Output rise time and fall time | Tr, Tf | 28 | Ps | 3 | ||
| LOS asserted | VLOS_F | 2 | Vcc_HOST | V | 4 | |
| LOS de-asserted | VLOS_N | Vee | Vee+0.8 | V | 4 | |
Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Supply Voltage | Vcc | -0.5 | 4.0 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Data Rate | DR | 9.953 | 10.3125 | 11.3 | Gb/s | |
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Supply Current | Icc5 | 300 | mA | |||
| Operating Case Temp. | Tc | 0 | 70 | °C | ||
| TI | -40 | 85 |
Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 810 | 850 | 880 | nm | |
| Ave. output power (Enabled) | PAVE | -6 | 0 | dBm | 1 | |
| Extinction Ratio | ER | 3.5 | dB | |||
| RMS spectral width | Δλ | 0.85 | nm | |||
| Rise/Fall time (20%~80%) | Tr/Tf | 50 | ps | 2 | ||
| Dispersion penalty | TDP | 2 | dB | |||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Operating Wavelength | 840 | 850 | 860 | nm | ||
| Receiver Sensitivity(ER=4.5) | PSEN1 | -11.1 | dBm | 3 | ||
| Overload | PAVE | 0.5 | dBm | |||
| LOS Assert | Pa | -30 | dBm | |||
| LOS De-assert | Pd | -12 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1. Measured at 10.3125b/s with PRBS 231 – 1 NRZ test pattern.
2. 20%~80%
3. Under the ER worst case=4.5@ 10.3125 Gb/s with PRBS 231 - 1 NRZ test pattern for BER < 1x10-12
Applications
● 10G Base-SR/SW at 10.3125G
● 10G Fiber Channel
● Other optical links
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
25000000-28000000
Employee Number:
150~300
Ecer Certification：
Verified Supplier
Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ... Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ...
Get in touch with us
Leave a Message, we will call you back quickly!