Shenzhen Olinkcom Technology Co.,Ltd
| Payment Terms | T/T or Net 30 days |
| Supply Ability | 80-120k per month |
| Delivery Time | 3-5 working days |
| Packaging Details | Individual package Or 10pcs/pallet Or 20pcs/pallet |
| Form Factor | QSFP+ |
| Data Rate | 42Gbps (4×10.5Gbps) |
| Cisco Compatible | QSFP-40G-SR4 |
| Cable Type | MMF |
| Wavelength | 850nm |
| Distance | 100m/150m |
| Connector | MPO |
| DDM/DOM | Supported |
| Receiver Type | PIN |
| Temperature Range | 0 to 70°C |
| Brand Name | OLKOPTO |
| Model Number | OLSQ854XM-CDS1 |
| Certification | RoHS FCC CE GS UL FDA etc |
| Place of Origin | Shenzhen China |
View Detail Information
Explore similar products
Fiber Optic 40G QSFP+ LR4 Transceiver Parallel Pluggable 1270nm 10km
Single Mode QSFP+ 40G Optical Transceiver 1330nm 40km DOM Duplex LC
DOM SMF 40G QSFP+ Transceiver 1330nm 10km SMF LR4 Optical Module
40G 2km 10km DOM QSFP+ MPO Transceiver LR4 PSM MikroTik Compatible
Product Specification
| Payment Terms | T/T or Net 30 days | Supply Ability | 80-120k per month |
| Delivery Time | 3-5 working days | Packaging Details | Individual package Or 10pcs/pallet Or 20pcs/pallet |
| Form Factor | QSFP+ | Data Rate | 42Gbps (4×10.5Gbps) |
| Cisco Compatible | QSFP-40G-SR4 | Cable Type | MMF |
| Wavelength | 850nm | Distance | 100m/150m |
| Connector | MPO | DDM/DOM | Supported |
| Receiver Type | PIN | Temperature Range | 0 to 70°C |
| Brand Name | OLKOPTO | Model Number | OLSQ854XM-CDS1 |
| Certification | RoHS FCC CE GS UL FDA etc | Place of Origin | Shenzhen China |
| High Light | 150m 40G QSFP+ Transceiver ，850nm QSFP+ Transceiver ，qsfp28 mpo | ||
Cisco Compatible 40G QSFP+ Transceiver Sr4 850nm 150m Mpo Multi Mode
Cisco QSFP-40G-SR4 Compatible 40G QSFP+ SR4 850nm 150m MPO Optical Transceiver Module
Product Description
This transceiver is compliant with QSFP+ MSA, IEEE 802.3ba 40GBASE-SR4 and breakout to 4x10GBASE-SR standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP+ MSA, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be used in various applications, such as data centers, campus and computing networks, interconnections within and between switches, routers, NICs and transport equipment.
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Supply Voltage | Vcc | -0.5 | 3.6 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % | |
| Damage Threshold, per Lane | DT | 3.4 | dBm |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
General Operating Characteristics
| Parameter | Value | Unit | Note |
| Module Form Factor | QSFP+ | ||
| Number of Lanes | 4 Tx and 4 Rx | ||
| Maximum Aggregate Data Rate | 42.0 | Gb/s | |
| Maximum Data Rate per Lane | 10.3125 | Gb/s | |
| Protocols Supported | Typical applications include 40G Ethernet, Infiniband, Fibre Channel, SATA/SAS3 | ||
| Electrical Interface and Pin-out | 38-pin edge connector ,Pin-out as defined by the QSFP+ MSA | ||
| Management Interface | Serial, I2C-based, 400 kHz maximum frequency |
| Parameter | Symbol | Min | Typ | Max | Units | Note |
| Bit Rate per Lane | BR |
10.3125
|
Gb/sec | 1 | ||
| Bit Error Ratio | BER |
|
|
1e-12
|
|
2
|
| Distance on OM3 MMF (CDS1) | D1 |
|
|
100 | meters |
3
|
| Distance on OM4 MMF (CDS1) | D2 | 150 | meters | 3 |
Notes:
1. Compliant with 40G Ethernet. Compatible with 1/10 Gigabit Ethernet and 1/2/4/8/10G Fibre Channel.
2. Tested with a PRBS 231-1 test pattern.
3. Per 40GBASE-SR4, IEEE 802.3ba,Belong to part No: OLSQ854XM-CDS1
Product Features
● Supports 9.95 to 10.3125Gb/s bit rates per Channel
● Four-Channel ,1x12 MPO receptacle
● Hot pluggable QSFP+ form factor
● VCSEL 850nm array Technology
● Applicable for 100m on OM3 MMF,150mon OM4 MMF.
● Built-in digital diagnostic functions
● Low power consumption, < 1.5W
● Unretimed XLPPI electrical interface
● Operating case temperature: 0°C to 70 °C
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
25000000-28000000
Employee Number:
150~300
Ecer Certification：
Verified Supplier
Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ... Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ...
Get in touch with us
Leave a Message, we will call you back quickly!