Shenzhen Olinkcom Technology Co.,Ltd
| Payment Terms | T/T |
| Supply Ability | 80-120k per month |
| Delivery Time | 3-6 working days |
| Packaging Details | 10pcs/ foil bag, individual package |
| Product Name | 10G SFP+ 850nm 300m |
| Compatibility | NetApp |
| Data Rate | 10Gb/s |
| Form Factor | SFP+ |
| Wavelength | 850nm |
| Max Distance | 300m |
| Fiber Type | MMF |
| Optical Components | VCSEL/PIN |
| Function Options | DOM |
| Operating Temperature | 0-70°C, -40-85°C |
| Brand Name | OLKOPTO |
| Model Number | OLSP851XL-C(I)DS3 |
| Certification | CE, RoHS, FCC, FDA, UL, EMC, ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Alcatel Compatible SFP+ ZR 10GBASE 1550nm 80km Transceiver
ODM 1310nm 10km 10G SFP+ Optical Transceiver Duplex LC Connector
Edgecore Compatible 10GBASE-SR SFP+ Transceiver 850nm 300m DOM
Intel Compatible 10G SFP+ Optical Transceiver 1550nm 10GBASE-ER/OC-192
Product Specification
| Payment Terms | T/T | Supply Ability | 80-120k per month |
| Delivery Time | 3-6 working days | Packaging Details | 10pcs/ foil bag, individual package |
| Product Name | 10G SFP+ 850nm 300m | Compatibility | NetApp |
| Data Rate | 10Gb/s | Form Factor | SFP+ |
| Wavelength | 850nm | Max Distance | 300m |
| Fiber Type | MMF | Optical Components | VCSEL/PIN |
| Function Options | DOM | Operating Temperature | 0-70°C, -40-85°C |
| Brand Name | OLKOPTO | Model Number | OLSP851XL-C(I)DS3 |
| Certification | CE, RoHS, FCC, FDA, UL, EMC, ISO9001 | Place of Origin | China |
| High Light | 300m 10G SFP+ SR ，850nm 10G SFP+ SR ，850nm sfp+ sr | ||
Multi Mode 10G SFP+ SR Transceiver NetApp Compatible FDA Approved
NetApp X6589-R6 Compatible 10Gb/s 850nm Multi-mode SFP+ Transceiver
The NetApp X6589-R6 Compatible OLSP851XL-C(I)DS3 is a 10G SR multi-mode SFP+ transceiver using 850nm wavelength and reaching up to 300m distance on 50/125um fiber. The module can be used for 10G Ethernet, SONET or SDH networks.
Product Features
• Functionally identical to NetApp X6589-R6 10GBase-SR SFP+ transceiver
• Electrical interface compliant to SFF-8431
• 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR
• 850nm VCSEL transmitter, PIN photo-detector
• Distance up to 300 meters on 10G OM3 fiber
• ROHS compliant and lead-free
Electrical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Differential data input swing | VINPP | 180 | 700 | mVpp | 1 | |
| Transmit Disable Voltage | VD | VCC-0.8 | Vcc | V | ||
| Transmit Enable Voltage | VEN | Vee | Vee+0.8 | |||
| Input differential impedance | Rin | 100 | Ω | |||
| Receiver | ||||||
| Differential data output swing | Vout,pp | 300 | 850 | mVpp | 2 | |
| Output rise time and fall time | Tr, Tf | 28 | Ps | 3 | ||
| LOS asserted | VLOS_F | 2 | Vcc_HOST | V | 4 | |
| LOS de-asserted | VLOS_N | Vee | Vee+0.8 | V | 4 | |
Note:
1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100Ω differential termination.
3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.
Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 840 | 850 | 860 | nm | |
| Ave. output power (Enabled) | PAVE | -6 | -1 | dBm | 1 | |
| Extinction Ratio | ER | 4 | 4.5 | dB | ||
| RMS spectral width | Δλ | 1 | nm | |||
| Rise/Fall time (20%~80%) | Tr/Tf | 50 | ps | 2 | ||
| Dispersion penalty | TDP | 3.9 | dB | |||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Operating Wavelength | 840 | 850 | 860 | nm | ||
| Receiver Sensitivity(ER=4.5) | PSEN1 | -11.1 | dBm | 3 | ||
| Overload | PAVE | 0.5 | dBm | |||
| LOS Assert | Pa | -30 | dBm | |||
| LOS De-assert | Pd | -12 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1. Measured at 10.3125b/s with PRBS 231 – 1 NRZ test pattern.
2.20%~80%
3.Under the ER worst case=4.5@ 10.3125 Gb/s with PRBS 231 - 1 NRZ test pattern for BER < 1x10-12
Olinkcom's OLSP851XL-C(I)DS3 is a high performance and cost-effective 10GBASE-SR SFP+ transceiver module for 10 Gigabit Ethernet links up to 300m over OM3 multimode fiber. The transceiver features a highly reliable 850nm VCSEL transmitter and PIN photo-detector into duplex LC optical connector. It complies with SFP+ MSA specifications (SFF-8431, SFF-8432), 10 Gigabit Ethernet specifications (10GBASE-SR/SW per IEEE 802.3ae ), and 10G Fibre Channel (1200-MX-SN-I).
Additionally, the 10GBASE-SR SFP+ transceiver has been integrated with an enhanced digital diagnostic monitoring interface (DDMI), which provides real-time monitoring of the transceiver temperature, laser bias current, optical power, received optical power and transceiver supply voltage.
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
25000000-28000000
Employee Number:
150~300
Ecer Certification：
Verified Supplier
Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ... Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ...
Get in touch with us
Leave a Message, we will call you back quickly!