Shenzhen Olinkcom Technology Co.,Ltd
| Payment Terms | TT/Net 30days |
| Supply Ability | 80-100k per month |
| Delivery Time | 3-5 working days |
| Packaging Details | Individual package OR 10 pcs/ pallet OR 20 pcs/ pallet |
| Part Number | OLSQ854XM-CDS1 |
| Data Rate | 40G |
| Transmission Distance | 100m |
| Wavelength | 850nm |
| Brand Name | OLKOPTO |
| Model Number | OLSQ854XM-CDS1 |
| Certification | ISO9001,ISO14001,OHSAS18001 |
| Place of Origin | SZ China |
View Detail Information
Explore similar products
Fiber Optic 40G QSFP+ LR4 Transceiver Parallel Pluggable 1270nm 10km
Cisco Compatible 40G QSFP+ Transceiver Sr4 850nm 150m Mpo Multi Mode
Single Mode QSFP+ 40G Optical Transceiver 1330nm 40km DOM Duplex LC
DOM SMF 40G QSFP+ Transceiver 1330nm 10km SMF LR4 Optical Module
Product Specification
| Payment Terms | TT/Net 30days | Supply Ability | 80-100k per month |
| Delivery Time | 3-5 working days | Packaging Details | Individual package OR 10 pcs/ pallet OR 20 pcs/ pallet |
| Part Number | OLSQ854XM-CDS1 | Data Rate | 40G |
| Transmission Distance | 100m | Wavelength | 850nm |
| Brand Name | OLKOPTO | Model Number | OLSQ854XM-CDS1 |
| Certification | ISO9001,ISO14001,OHSAS18001 | Place of Origin | SZ China |
| High Light | MMF 40G QSFP+ Transceiver ，MPO 40G QSFP+ Transceiver ，850nm QSFP+ Transceiver | ||
Juniper Compatible 40G QSFP+ Transceiver SR4 850nm 100m DOM MPO MMF
Juniper Compatibility Switches QSFP+ 40G SR4 850nm 100m DOM MPO MMF Optical Transceiver Module
Product Features
● Supports 9.95 to 10.3125Gb/s bit rates per Channel
● Four-Channel ,1x12 MPO receptacle
● Hot pluggable QSFP+ form factor
● VCSEL 850nm array Technology
● Applicable for 100m on OM3 MMF,150mon OM4 MMF.
● Built-in digital diagnostic functions
● Low power consumption, < 1.5W
● Unretimed XLPPI electrical interface
● Operating case temperature: 0°C to 70 °C
Applications
● 40GBASE-SR4 40G Ethernet
● Datacom/Telecom switch & router connections
● Data Aggregation and Backplane Applications
● Proprietary Protocol and Density Applications
● Infiniband transmission at 4CH SDR, DDR and QDR
● Other optical links
Product Descriptions
Olinkcom’s OLSQ854XM-CDS1 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth.one version is Each lane can operate at 10.5Gbps up to100m using OM3 or 150m using OM4 Multimode fiber,another version is Each lane can operate at 10.5Gbps up to300m using OM3 or 400m using OM4 Multimode fiber These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Optical Characteristics (TOP(C) = 0 to 70 ℃, VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 810 | 850 | 880 | nm | |
| Ave. output power (Enabled) | PAVE | -7.6 | +2.4 | dBm | ||
| Difference in launch power between any two lanes (OMA) | DL | 4 | dB | |||
| Extinction Ratio | ER | 3 | dB | |||
| Peak power, each lane | PP | 4 | dBm | |||
| Dispersion penalty, each lane | TDP | 3.5 | dB | |||
| Average launch power of OFF transmitter, each lane | POFF | -30 | dB | |||
| Eye Mask coordinates: X1, X2, X3, Y1, Y2, Y3 | SPECIFICATION VALUES 0.23, 0.34, 0.43, 0.27, 0.35, 0.4 | Hit Ratio = 5E-5 | ||||
| Receiver | ||||||
| Operating Wavelength | λc | 840 | 850 | 860 | nm | |
| receiver sensitivity in OMA(OLSQ854XM-CDS1) | PSEN | -9.5 | dBm | 3 | ||
| Average Receive Power,each lane | PAVE | -11 | +2.4 | dBm | ||
| Receiver Reflectance | Rrx | -12 | dB | |||
| LOS Assert | Pa | -30 | dBm | |||
| LOS De-assert | Pd | -13 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1.Measured with conformance test signal at TP3 for BER = 1E-12 Receiver Characteristics
More details of our products:
High Reliable Optical Components and Excellent Design
1.DLB laser and PIN photodiode
2.Thick Gold Finger
3.Plating Hard Gold Shell
Cost-effective and Reliable Transmission
Our Packing & Labeling:
Our all modules have 3 years warranty!
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
25000000-28000000
Employee Number:
150~300
Ecer Certification：
Verified Supplier
Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ... Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able ...
Get in touch with us
Leave a Message, we will call you back quickly!