Denor Fluid Equipment (wuhan) Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 30sets/month |
| Delivery Time | 5-8 work days |
| Packaging Details | Wooden case packing |
| Products | Self Priming Pump |
| Outlet Size | 1-1/2 inches |
| Protection | IP 54/55 |
| Pipe Siza | 1 |
| Impeller | Brass |
| Standard Or Nonstandard | Standard |
| Engine Model | 188FB |
| Suction Max | 9M |
| Current | 3.2A (220v 50hz) |
| Feature | Safe Performance |
| Engine Power | 11hp |
| Head Max | 65M |
| Viscosity | ≤100cP |
| Brand Name | DENOR |
| Model Number | DENOR-ZXB |
| Certification | ISO/CE/TUV |
| Place of Origin | China |
View Detail Information
Explore similar products
LQFZ Stainless Steel Self Priming Pump 50L/Min Corrosion Resistant Centrifugal
ZW Type Self Priming Sewage Pump Single Phase Non Clog Sewage Submersible Pump
FZB Fluoroplastic Self Priming Horizontal Centrifugal Pump Corrosive Resistant
Compact ZCQ Self Priming Magnetic Drive Pump Full Sealed Non Leakage
Product Specification
| Payment Terms | T/T | Supply Ability | 30sets/month |
| Delivery Time | 5-8 work days | Packaging Details | Wooden case packing |
| Products | Self Priming Pump | Outlet Size | 1-1/2 inches |
| Protection | IP 54/55 | Pipe Siza | 1 |
| Impeller | Brass | Standard Or Nonstandard | Standard |
| Engine Model | 188FB | Suction Max | 9M |
| Current | 3.2A (220v 50hz) | Feature | Safe Performance |
| Engine Power | 11hp | Head Max | 65M |
| Viscosity | ≤100cP | Brand Name | DENOR |
| Model Number | DENOR-ZXB | Certification | ISO/CE/TUV |
| Place of Origin | China | ||
| High Light | Vacuum Assisted Self Priming Pump ，Cast Iron Flood Control Water Pump ，Flood Control Water Pump 11hp | ||
Flood control vacuum assisted self-priming pump strong self-priming pump
| Material | cast iron | Drive mode | electric |
|---|---|---|---|
| Pump shaft position | Horizontal | Impeller structure | Semi-open impeller |
| performance | Non-blocking | Impeller suction method | Single suction |
| Lift | 1-130m | Speed | 2900-960r/m |
| power | 5500-315000w | flow | 100-6000m³/h |
Flood control vacuum assisted self-priming pump has a maximum flow rate of 6000m3/h, so the main advantage of this pump is its wide flow range. The main feature of the vacuum assisted self-priming pump with open impeller self-priming pump is that it has a particularly good anti-blocking effect and will not cause any blockage, and its self-priming capacity can reach 9 meters.
Flood Control Vacuum Assisted Self-Priming Pump
Product Overview;
The vacuum-assisted self-priming pump is mainly based on the strong self-priming pump and the open impeller self-priming pump, which adds a vacuum-assisted system. The self-priming pump with the vacuum-assisted system has improved its self-priming performance to a higher level. If the vacuum-assisted self-priming pump adopts a strong self-priming pump product, the self-priming height can reach 9 meters, and the flow rate of this pump can be within 6000m3/h at most. Therefore, the main advantage of this pump is its wide flow range. The main feature of the vacuum-assisted self-priming pump using an open impeller self-priming pump is that the anti-blocking effect is particularly obvious, and there will be no blockage, and the self-priming capacity can reach 9 meters. If the transported liquid contains a lot of debris, it is recommended to use an open impeller vacuum-assisted self-priming pump product. However, the maximum flow rate of this open impeller vacuum-assisted self-priming pump is only 800m3/h. If a larger flow rate is required, it needs to be customized and the production cycle is about 1 month.
Conditions for use of self-priming pumps with vacuum assist system
1. The ambient temperature of the vacuum-assisted self-priming pump should be less than 50°C, and the temperature of the liquid is usually less than 100°C. Special requirements can be customized.
2. The cast iron vacuum-assisted self-priming pump is suitable for conveying liquids with a pH value of 6 to 9, while the stainless steel vacuum-assisted self-priming pump is suitable for conveying liquids with a pH value of 2 to 13.
3. The weight of the liquid used by the vacuum-assisted self-priming pump does not exceed 1240kg/m3. When conveying sewage, the lift in the parameter table is 10% lower than that of the clean water type. Therefore, attention should be paid when selecting the type. If the sewage is conveyed, for example, a lift of 10 meters is required, then it is recommended to use a pump with a lift of 15 meters.
4. The self-priming height of the vacuum-assisted self-priming pump cannot exceed the specified value range.
5. The diameter of suspended particles in the vacuum-assisted self-priming pump is about 20% of the pump diameter, and the fiber length is 5 times the diameter of the vacuum-assisted self-priming pump.
Company Details
Business Type:
Manufacturer
Year Established:
2015
Total Annual:
100000000-110000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Denor Fluid Equipment (Wuhan) Co., Ltd. is a reputable manufacturer and supplier of fluid equipment for water systems. The company has incorporated advanced fluid production technology and processes from Germany. Since its establishment, Denor has upheld its core values of morality, integrity, and m... Denor Fluid Equipment (Wuhan) Co., Ltd. is a reputable manufacturer and supplier of fluid equipment for water systems. The company has incorporated advanced fluid production technology and processes from Germany. Since its establishment, Denor has upheld its core values of morality, integrity, and m...
Get in touch with us
Leave a Message, we will call you back quickly!