Wisdomlong Technology CO.，LTD
| Payment Terms | L/C, T/T |
| Supply Ability | 1000 |
| Delivery Time | 3-5days |
| Packaging Details | New Original |
| Power Source | Loop Powered (2-Wire)ed (2-Wire) |
| Operating ambient temperature | -40C to + 80C |
| Brand | Fisher |
| Product type | Digital Level Controller |
| Part number | DLC3010 |
| Place of origin | Singapore |
| Brand Name | Fisher |
| Model Number | DLC3010 |
| Certification | CE |
| Place of Origin | Singapore |
View Detail Information
Explore similar products
NTPL01 BAILEY INFI 90 PLC NETWORK PLNT COMM LOOP UNIT NEW IN BOX
Omron FZW-C22P INTEGRATOR VISION SYSTEM 4 USB PORTS 24VDC 5AMP SOURCE
PHCBR30000000 BRIDGE CONTROLLER MODULE BRC300 SYMPHONY PLUS PLC MODULE
INNPM11 INFI90 MODULE ASSY PLC NETWORK PROCESSOR MODULE
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 1000 |
| Delivery Time | 3-5days | Packaging Details | New Original |
| Power Source | Loop Powered (2-Wire)ed (2-Wire) | Operating ambient temperature | -40C to + 80C |
| Brand | Fisher | Product type | Digital Level Controller |
| Part number | DLC3010 | Place of origin | Singapore |
| Brand Name | Fisher | Model Number | DLC3010 |
| Certification | CE | Place of Origin | Singapore |
| High Light | 80C PLC Programmable Logic Controller ，Fisher Fieldvue PLC Programmable Logic Controller ，digital level controller dlc3010 | ||
DLC3010 Digital Level Controller PLC Programmable Logic Controller Fisher Fieldvue
Features of DLC3010 Digital Level Controller
Specs of DLC3010 Digital Level Controller
| Area Classification | Intrinsically Safe, Explosion Proof, Dust Ignition Proof, Flame Proof, Non-incendive, Type N |
| Communication Protocol | HART®, 4-20mA Analog |
| Data Interface | Wired |
| Diagnostics | Yes |
| Mounting Type | 249 Series Torque Tube Arm Mounted |
| Operating Temperature | Standard Temperature |
| Position Control | Monitoring |
| Power Source | Loop Powered (2-Wire)ed (2-Wire) |
| Process Control | Level |
The Fisher FIELDVUE DLC3010 digital level controller helps you gain easy access to information critical to your process operation.
Gather information about the process, instrument, or sensor using the 475 or 375 Field Communicator. The DLC3010 digital level controller can be used in analog or HART® digital signaling mode with the DeltaV™ system.
Lever Lock
The lever lock is built in to the coupling access handle. When the handle is open, it positions the lever in the neutral
travel position for coupling. In some cases, this function is used to protect the lever assembly from violent motion
during shipment.
A DLC3010 controller will have one of the following mechanical configurations when received:
1. A fully assembled and coupled caged‐displacer system is shipped with the displacer or driver rod blocked within the
operating range by mechanical means. In this case, the access handle (figure 2) will be in the unlocked position.
Remove the displacer‐blocking hardware before calibration. (See the appropriate sensor instruction manual). The
coupling should be intact.
Power/Current Loop Connections
Use ordinary copper wire of sufficient size to ensure that the voltage across the digital level controller terminals does
not go below 12.0 volts DC. Connect the current signal leads as shown in figure 9. After making connections, recheck
the polarity and correctness of connections, then turn the power on.
RTD Connections
An RTD that senses process temperatures may be connected to the digital level controller. This permits the instrument
to automatically make specific gravity corrections for temperature changes. For best results, locate the RTD as close to
the displacer as practical. For optimum EMC performance, use shielded wire no longer than 3 meters (9.8 feet) to
connect the RTD. Connect only one end of the shield. Connect the shield to either the internal ground connection in
the instrument terminal box or to the RTD thermowell. Wire the RTD to the digital level controller as follows (refer to
figure 11
Two‐Wire RTD Connections
1. Connect a jumper wire between the RS and R1 terminals in the terminal box.
2. Connect the RTD to the R1 and R2 terminals.
Good Service in WTL:
> Please send your RFQ to get the latest price.
> Normally, we will ship the items in 1-2 weeks after receive the payment.
> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.
> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate. If needed, please contact us for specific prices.
Liability:
WTL is not liable for any personal injury or property damage resulting from the use of this equipment. It is
buyer's responsibility as to the safe handling & operation of this equipment and to verify equipment is
compliance to their machinery.
Wisdomlong Technology CO.,LTD Featured Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
Contact person:Suki
Email:wtl2502keji@163.com
Skype:wtl2502
Tel:+86-13268302140
Company Details
Business Type:
Distributor/Wholesaler,Trading Company,Seller
Year Established:
2009
Total Annual:
100000-200000
Employee Number:
15~30
Ecer Certification：
Verified Supplier
Wisdomlong Technology CO.,LTD locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic convicti... Wisdomlong Technology CO.,LTD locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic convicti...
Get in touch with us
Leave a Message, we will call you back quickly!