Keram (Nanjing)ELECTRICAL Equipment Co., Ltd.
| Payment Terms | T/T, L/C |
| Supply Ability | 2000pic/month |
| Delivery Time | 7-10days |
| Packaging Details | Carton |
| Output Signal | 4-20mA（2wire） |
| Storage Temperature | -40…+60℃ |
| Power Consumption | ＜1.5W |
| Accuracy | <±1% FS@-5 to +65℃ |
| Operating temperature | -20 ··· +70°C |
| Brand Name | KeramControls |
| Model Number | KDP110 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Air DPT Differential Pressure Transmitter 4-20mA IP65
Air HVAC Sensor Transmitters 100Pa To 10000Pa 0-10V
0-10V DPT Differential Pressure Transmitter
4-20mA Digital Differential Pressure Transducer
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 2000pic/month |
| Delivery Time | 7-10days | Packaging Details | Carton |
| Output Signal | 4-20mA（2wire） | Storage Temperature | -40…+60℃ |
| Power Consumption | ＜1.5W | Accuracy | <±1% FS@-5 to +65℃ |
| Operating temperature | -20 ··· +70°C | Brand Name | KeramControls |
| Model Number | KDP110 | Certification | CE |
| Place of Origin | China | ||
| High Light | 20mA Differential Air Pressure Sensor ，2wire Diff Pressure Sensor ，IP65 Diff Pressure Sensor | ||
The working principle of the differential pressure transmitter transfers the differential pressure taken by the standard throttling parts (nozzles, orifice plates, venturi tubes) to the isolation diaphragm on both sides of the transmitter through the pressure pipes on both sides of the differential pressure transmitter, and then transmits the differential pressure signal to the measuring element through the sealing fluid (silicone oil, fluoro oil) in the diaphragm, and then the measuring element will convert the differential pressure signal into the corresponding electrical signal and transmit it to the converter, Finally, it is transformed into standard electrical signals (1~5V, 4~20mA) after being processed by operational amplifier and other units.
Generally, the installation site of the differential pressure transmitter is far away from the control room. In order to ensure that the signal is not distorted during transmission, the standard current signal of 4~20mA is generally used as the transmission signal, and the contact signal in the control room becomes 1~5V.
| Model | KDP110 |
| Measurement Units | Pa,mmH2O,inWG,mmHG,KPa,mbar |
| Accuracy | <±1% FS@-5 to +65℃ |
| Response Time | 0.5s |
| Repeat Stability | ±0.01 % at FS /Year |
| Resolution | 0.1 Pa; 0.1 mmH2O; 0.01mbar; 0.01mmHG |
| Media | Air and neutral gases |
| Operating Temperature | -20…+70℃ |
| Storage Temperature | -40…+60℃ |
| Power Consumption | ＜1.5W |
| Tolerated over pressure | x15 |
| Power Supply | 16~30VAC/DC (3wire) / 18~30VDC (2wire) |
| Output Signal | 4-20mA(2wire) |
| 4-20mA(3wire) | |
| 0~5V/0~10VDC(3wire) | |
| RS-485 | |
| Customized | |
| Auto Zero | Manual calibration |
| Housing Material | PC&ABS,UL94V-0 |
| Protection Class | IP65/NEMA4 |
| Cable Gland | M16*1.5 |
KDP110-Range-Output
| Model | Range | Output | ||
| KDP110 | -100~+100Pa | (1) | 4-20mA(2 wire) | (E) |
| -1000~+1000Pa | (2) | 4-20mA(3 wire) | (F) | |
| -2000~+2000Pa | (3) | 0-5/0-10V(3 wire) | (G) | |
| -10000~+10000Pa | (4) | RS-485 | (H) | |
| Customized | ||||
Company Details
Business Type:
Manufacturer
Year Established:
1998
Total Annual:
2000000-3000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Nanjing Qiyuan Controls & Equipment Co., Ltd. was found in 1998. In 2005, the number of the employees increased to more than 100. In 2006, its manufacturing base was moved to Huai An Industrial Development Zone. Keram Controls has obtained the investment from Keram Group in 2009. In ... Nanjing Qiyuan Controls & Equipment Co., Ltd. was found in 1998. In 2005, the number of the employees increased to more than 100. In 2006, its manufacturing base was moved to Huai An Industrial Development Zone. Keram Controls has obtained the investment from Keram Group in 2009. In ...
Get in touch with us
Leave a Message, we will call you back quickly!