YGB Bearing Co.,Ltd
| Payment Terms | T/T or LC |
| Supply Ability | 10,000pcs per month |
| Delivery Time | 5-10 working days after received your payment |
| Packaging Details | Packed in carton firstly,and then reinforced with wooden case for outer packing |
| Model | NU310ECM |
| Grease | Mobil polyrex EM,Kyodo Yushi SRL |
| Seal type | open,double seals,double shields |
| Number of row | Single |
| Size(mm) | 45 x 100 x 25 mm |
| Weight(kg) | 0.9 |
| material | GCr15/AISI52100/100Cr6 |
| MOQ | 1 |
| Brand Name | YGB,OEM,SKF,NTN |
| Model Number | NU310ECM NU311ECM |
| Certification | ISO9001:2008 |
| Place of Origin | China |
View Detail Information
Explore similar products
Anti Friction Mini Cylindrical Roller Bearing / ECPHA Nu 202 Bearing
Wind Turbine Cylindrical Roller Bearing / NU 303 ECP Pressure Roller Bearings
N313 N315 N318 N319 ECM Single Row Cylindrical Roller Bearing Low Friction
Original Double Row Spherical Roller Bearing 23130 Cc / W33 Free Sample
Product Specification
| Payment Terms | T/T or LC | Supply Ability | 10,000pcs per month |
| Delivery Time | 5-10 working days after received your payment | Packaging Details | Packed in carton firstly,and then reinforced with wooden case for outer packing |
| Model | NU310ECM | Grease | Mobil polyrex EM,Kyodo Yushi SRL |
| Seal type | open,double seals,double shields | Number of row | Single |
| Size(mm) | 45 x 100 x 25 mm | Weight(kg) | 0.9 |
| material | GCr15/AISI52100/100Cr6 | MOQ | 1 |
| Brand Name | YGB,OEM,SKF,NTN | Model Number | NU310ECM NU311ECM |
| Certification | ISO9001:2008 | Place of Origin | China |
| High Light | roller cage bearing ，sealed ball bearing | ||
Single Row Cylindrical Roller Bearing NU310ECM NU311ECM For HInteral Combustion Engine
Description :
| Model | NU310ECM |
| Bearing material | GCr15/AISI52100/100Cr6 |
| ID*OD*W (mm) | 50 x 110 x 27 MM |
| Seal type | double shields |
| Lead time | Stock or 15-30days |
| Weight(kg) | 1.31 |
| Limiting speed | 8000 r/min |
| Clearance | C2,C0,C3,C4,C5 |
| Vibration Level | V1, V2, V3, V4 |
| Precision Rating | P0,P6,P5,P4,P2 |
| MOQ | No MOQ |
| Port | Shanghai |
| Grease | Mobil polyrex EM,Kyodo Yushi SRL |
| Payment terms | T/T, L/C |
Photo:
Drawing:
Features:
1. Roller and raceway for the line contact or offline contact, radial bearing capacity big, apply to under heavy load and impact load
2. The friction coefficient is small, suitable for high speed, the limit speed close to deep groove ball bearings
3. N and NU type axial movement, can adapt to shaft caused by thermal expansion or installation error and shell the change of relative position, can be used for free end bearing
4. On the shaft or hole of the processing and the demand is higher, the bearing outer ring after installation axis relative deviation should be kept under strict control, so as not to cause contact stress concentration
5. Inner ring or outer ring separable, easy to install and disassemble
The following methods are commonly used to adjust radial clearance of fully loaded cylindrical roller bearings:
1. For the side gap of the cylindrical and oval bearing bush, it can be adjusted by hand grinding and scraping or by repairing and scraping after turning the parting surface of the bearing with mat.
2. For the top gap of the cylindrical and oval bearing bush, manual grinding and scraping can be adopted or the method of adding pad to the parting surface of bearing can be adjusted when conditions permit.
3. For multi-oil wedge-fixed bearing bush, in principle, it is not allowed to repair and adjust the clearance of bearing bush. If the clearance is not suitable, new tiles should be replaced.
4. For tilting type bearing bush with the multi-oil wedge, it is not allowed to repair and scrape tile block. If the gap is not suitable, the tile block should be replaced. For the tile with adjustable thickness, the amount of tile can be adjusted by adding a stainless steel pad under the adjustment block behind the tile, or by reducing the thickness of the adjustment block. Note that the thickness error between the tiles in the same group should be less than 0.01mm for the tilting type of multi-oil wedge bearing bush.
Shipping:
1). For small orders, we can send you by UPS, DHL, FEDEX. The tracking number will be advised after delivery.
2). If an order is big, we will advise you to use Air Freight or Sea Freight.
3). The balance payment should be paid before delivery to you.
4). In general, we deliver goods within 15 days.
Payment:
1: T/T: 30% as deposit and 70% balance after getting a copy of B/L.
2: L/C (cannot for branded bearings.)
3: Discuss together between buyer and supplier.
Company Details
Business Type:
Trading Company
Year Established:
19
Total Annual:
500000-2000000
Employee Number:
>100
Ecer Certification：
Active Member
YGB Bearing Co., Ltd is an integrated and modern enterprise engaged in the R&D, manufacture, and sales of high-quality bearings. We are the Bearing experts serving the OEM throughout China as well as the international markets, such as deep groove ball bearing, spherical roller bearing and ... YGB Bearing Co., Ltd is an integrated and modern enterprise engaged in the R&D, manufacture, and sales of high-quality bearings. We are the Bearing experts serving the OEM throughout China as well as the international markets, such as deep groove ball bearing, spherical roller bearing and ...
Get in touch with us
Leave a Message, we will call you back quickly!