TORICH INTERNATIONAL LIMITED
| Standard | ASTM |
| Grade | A335 P1, A335 P11, A335 P12, A335 P5, A335 P9, A335 P91, A335 P92, Gr2, Gr5 |
| Thickness | 1 - 50 mm |
| Outer Diameter(Round) | 6 - 420 mm |
| Application | Boiler Pipe, Aerospace |
| Surface Treatment | oil |
| Product name | Alloy Steel Tube |
| Production | Cold Drawn |
| Shape | Round |
| Place of Origin | Zhejiang, China (Mainland) |
| Certification | CE PED |
| Brand Name | Torich |
| Model Number | GB/T 3625-95 |
View Detail Information
Explore similar products
GOST 8732-78 Hot Worked Steel Pipes Hot Rolled Seamless Steel Alloy Tube For
ASTM B210 High Strength Thick Wall Special Aluminum Alloy Tube For Automotive
ASTM B265 TC4 Alloy Pipe Seamless Titanium Alloy Round Tubes For Aviation
ASTM B348 Alloy Steel Pipe Code Gr1 Hot Rolled Titanium Round Bar For Industrial
Product Specification
| Standard | ASTM | Grade | A335 P1, A335 P11, A335 P12, A335 P5, A335 P9, A335 P91, A335 P92, Gr2, Gr5 |
| Thickness | 1 - 50 mm | Outer Diameter(Round) | 6 - 420 mm |
| Application | Boiler Pipe, Aerospace | Surface Treatment | oil |
| Product name | Alloy Steel Tube | Production | Cold Drawn |
| Shape | Round | Place of Origin | Zhejiang, China (Mainland) |
| Certification | CE PED | Brand Name | Torich |
| Model Number | GB/T 3625-95 | ||
| High Light | alloy round tube ，thin wall steel tubing | ||
2017 Top quality most selling seamless alloy steel and pipe
alloy steel and pipe
Material : Titanimu Alloy Steel,
Characteristic of the material:High strength ,low density,good mechanical property ,good tenacity.good corrosion resistance .
It can be made by seamless and welded.and widely apply in power generation,Aerospace,oil and gas ,chemical processing.
Available size list:
OD 6-127mm
WT: 0.5-10mm
Cold drawn Seamless pipes with Ti and Ti alloy
| grade | condition | Diameter/mm | Wall thickness /mm | |||||||||||
| 0.5 | 0.6 | 0.8 | 1 | 1.25 | 1.5 | 2 | 2.5 | 3 | 3.5 | 4 | 4.5 | |||
| TA1,TA2,TA3,TA9,TA9-1, TA10 | Annealing (M) | >10-15 | o | o | o | o | o | o | o | - | - | - | - | - |
| >15-20 | - | o | o | o | o | o | o | o | - | - | - | - | ||
| >20-30 | - | o | o | o | o | o | o | o | - | - | - | - | ||
| >30-40 | - | - | - | - | o | o | o | o | o | - | - | - | ||
| >40-50 | - | - | - | - | o | o | o | o | o | o | - | - | ||
| >50-60 | - | - | - | - | - | o | o | o | o | o | o | - | ||
| >60-80 | - | - | - | - | - | - | o | o | o | o | o | o | ||
Welded pipes
| grade | condition | Diameter/mm | Wall thickness /mm | ||||||
| 0.5 | 0.6 | 0.8 | 1 | 1.25 | 1.5 | 2 | |||
| TA1,TA2,TA3,TA9,TA9-1, TA10 | Annealing (M) | 6-10 | o | o | o | o | o | o | |
| >10-15 | o | o | o | o | o | o | |||
| >15-30 | o | o | o | o | o | o | o | ||
Tolerance detail:
| Torerance for OD and WT | ||
| OD | Tolerance | WT Tolerance |
| 6-25 | ±0.10 | ±10% |
| >25-38 | ±0.13 | |
| >38-50 | ±0.15 | |
| >50-60 | ±0.18 | |
| >60-80 | ±0.25 | |
| Seamless and welded rolled pipe length | |||||
| Type | Seamless | Welded rolled pipe | |||
| OD≤15 | OD>15 | WT | |||
| WT≤2.0 | WT>2.0-4.5 | 0.5-0.8 | >0.8-2.0 | ||
| Length | 500-4000 | 500-9000 | 500-6000 | 500-8000 | 500-5000 |
| Note: Other lengths are also available. | |||||
| Welded Pipe length | |||
| Type | Welded pipe | ||
| WT0.5-1.25 | WT>1.25-2.0 | WT>2.0-2.5 | |
| Length | 500-15000 | 500-6000 | 500-4000 |
| Note: Other lengths are also available. | |||
Mechanical porperty :
| Mechanical porperty at room temperature | ||||
| Alloy grade | Condition | Mechanical porperty at room temperature | ||
| Tensile strength /Mpa | specified non-proportional extension strength /Mpa | percentage elongation after fracture % | ||
| TA1 | Annealing | ≥240 | 140-310 | ≥24 |
| TA2 | ≥400 | 275-450 | ≥20 | |
| TA3 | ≥500 | 380-550 | ≥18 | |
| TA9 | ≥400 | 275-450 | ≥20 | |
| TA9-1 | ≥240 | 140-310 | ≥24 | |
| TA10 | ≥460 | ≥300 | ≥18 | |
| Grade | Tube diameter expanding rate /% min |
| TA1,TA9-1 | 22 |
| TA2,TA9 | 20 |
| TA3,TA10 | 17 |
1~ Incoming Raw Material Inspection
2~ Raw Material Segregation to avoid steel grade mix-up
3~ Heating and Hammering End for Cold Drawing
4~ Cold Drawing and Cold Rolling, on line inspection
5~ Heat Treatment, +A, +SRA, +LC, +N, Q+T
6~ Straightening-Cutting to specified length-Finished Measuring Inspection
7~ Machanical Testing in own labs with Tensile Strength, Yield Strength, Elongation, Hardness, Impact, Mictrostruture etc
8~ Packing and Stocking.
A: A professional steel pipes materials inventor, manufacturer and solution provider
A: Generally it is 7-14 days if the goods are in stock. or it is 30-60 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but need pay the cost of freight.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller
Year Established:
1997
Total Annual:
10million-15million
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Who We are ？ TORICH is an enterprise that has been producing precision steel pipes and steel pipe processing for over 20 years, with a factory area of approximately 20000 square meters The main products produced are carbon steel and alloy steel grade seamless steel pipes, we... Who We are ？ TORICH is an enterprise that has been producing precision steel pipes and steel pipe processing for over 20 years, with a factory area of approximately 20000 square meters The main products produced are carbon steel and alloy steel grade seamless steel pipes, we...
Get in touch with us
Leave a Message, we will call you back quickly!