Product Specification

ASTM A29 4140 Steel Tube: Hot Rolled Carbon Alloy Seamless Steel Pipe for Automobile

Introduction

The ASTM A29 4140 steel tube is a hot rolled carbon alloy seamless steel pipe primarily used in the automotive industry. This article provides an overview of the material, its specifications, key features, chemical composition (presented in a table), mechanical properties (presented in a table), steel grade, applications, and possible alternative grades.

Material

The ASTM A29 4140 steel tube is made from carbon alloy steel and is known for its excellent strength, toughness, and wear resistance. It is widely used in various automotive applications where high strength and durability are required.

Specification

The ASTM A29 4140 steel tube is available in seamless form and is typically manufactured according to the following specifications:

• Size Range: Outer diameter ranging from 3/8" to 4" and wall thickness ranging from 0.028" to 0.500"
• Length: Customizable, typically ranging from 6 to 24 feet
• Heat Treatment: Annealed, normalized, or quenched and tempered as required
• Surface Finish: Black, bare, or phosphate coated

Key Features

The key features of the ASTM A29 4140 steel tube include:

1. High Strength: It exhibits excellent strength characteristics, making it suitable for applications that require heavy mechanical loads.
2. Toughness: The steel tube possesses good toughness, enabling it to withstand harsh operating conditions and resist deformation or breakage.
3. Wear Resistance: 4140 steel exhibits exceptional wear resistance, making it suitable for applications involving abrasive materials or environments.
4. Machinability: It can be easily machined and lends itself well to various fabrication processes, enhancing its versatility.
5. Weldability: ASTM A29 4140 steel tube can be welded using common techniques, further expanding its potential applications.

Chemical Composition

The chemical composition of ASTM A29 4140 steel tube is as follows:

Mechanical Properties

The mechanical properties of ASTM A29 4140 steel tube are as follows:

Steel Grade

The steel grade ASTM A29 4140 corresponds to the American standard designation for this steel pipe. It is a widely accepted grade for automotive applications, known for its high strength and durability.

Application

The ASTM A29 4140 steel tube finds widespread application in the automotive industry, especially in the manufacturing of:

• Axle shafts
• Crankshafts
• Suspension components
• Connecting rods
• Gears and gear shafts
• Steering components

Its high strength and superior toughness make it suitable for such critical applications where reliability and performance are paramount.

Possible Alternative Grades

While ASTM A29 4140 steel tube is commonly used, there are alternative grades available that may suit specific application requirements. Some possible alternative grades include:

1. ASTM A519 4140: A similar seamless steel tube with slightly different chemical composition and mechanical properties.
2. ASTM A513 4140: A welded or seamless mechanical tubing variant with comparable strength and toughness.
3. AISI 4340: A nickel-chromium-molybdenum alloy steel offering higher strength and improved hardenability, but at a higher cost.
4. AISI 1020: A low carbon steel with good machinability but lower strength compared to 4140. Suitable for less demanding applications.

Haiyan Sanxin Steel Pipe Factory is a leading manufacturer of steel pipes in China. Located in a region with excellent geographical advantages, the factory is situated close to the Zhoushan Port and Ningbo Port.

Our factory covers an area of more than 25,000 square meters and has been in the steel pipe manufacturing business for 20 years. Over this period, we have accumulated a wealth of professional experience, which has helped us establish ourselves as a trusted name in the industry.

At our factory, we specialize in the production of various types of steel pipes, including stainless steel pipe, carbon steel pipe, copper pipe, steel pipe,seamless steel pipe and welded pipe. Our expertise in this field is evident from the 12 patents that we hold, which demonstrate our commitment to innovation and excellence.

Q: Are you trading company or manufacturer ?

A: manufacturer,also can do trading.

Q: How long is your delivery time?

A: Generally speaking,it is 10-15 days if the goods are in stock,or it is 30-40 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples? is it free or extra ?

A: Yes, we could offer the sample for free charge but need pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30% T/T in advance ,balance before shippment.

If you have another question, pls feel free to contact with me.