Xi'an New Force Energy Engineering Co.,Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 50000 tons per month |
| Delivery Time | 2~10 weeks |
| Packaging Details | wooden box |
| Material | Alloy Steel |
| Standard | ASTM A335 |
| Grade | P92 |
| Manufacture | Hot Rolled or Cold Drawn |
| Max. Size | 56'' |
| Form | Seamless |
| Brand Name | NEW FORCE |
| Model Number | P92 |
| Certification | MTC |
| Place of Origin | China |
View Detail Information
Explore similar products
P12 Alloy Steel Seamless Pipes ASTM A335 Standard Fixed / Random Length
ASTM / ASME A / SA 335 P22 Pipe , Seamless Alloy Steel Pipe Heat Treatment
Seamless Ferritic Alloy Steel Pipe ASTM A335 P5 , Alloy Seamless Pipe 56'' Size
Durable Seamless Steel Pipe ASTM A106 Gr. B For High Temperature Service
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 50000 tons per month |
| Delivery Time | 2~10 weeks | Packaging Details | wooden box |
| Material | Alloy Steel | Standard | ASTM A335 |
| Grade | P92 | Manufacture | Hot Rolled or Cold Drawn |
| Max. Size | 56'' | Form | Seamless |
| Brand Name | NEW FORCE | Model Number | P92 |
| Certification | MTC | Place of Origin | China |
| High Light | round steel tubing ，seamless steel tube | ||
P92 Nuclear Power Plant Seamless Steel Pipe as per ASTM A335 Standard
New Force is providing ASTM A335 P92 alloy steel seamless pipes, which are mainly used for nuclear power plant high-temperature service. P92 pipe a kind of chrome moly pipes listed in ASTM A335, a standard in power generation and petrochemical industry. TIPTOP supply a full range of A335 chrome moly pipes, also including the minimum wall thickness pipes.
1. Application:
For high pressure boiler and steam header pipes; petrochemical industry pipes; thermal power plant; nuclear power plant; USC boiler.
2. Standards:
ASTM A335 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
3. Ordering Information
Quantity (feet, meters, or number of lengths),
Name of material (seamless alloy steel pipe),
Grade (P92),
Manufacture (hot-finished or cold-drawn),
Size using one of the following:
NPS and schedule number;
Outside diameter and nominal wall thickness;
Outsider diameter and minimum wall thickness;
Inside diameter and nominal wall thickness;
Inside Diameter and minimum wall thickness.
Length (specific or random)
End finish (plain end or bevel end)
4. Chemical Requirements
| Chemical Requirements | |||||||||
| Grade | UNS Designation | Composition, % | |||||||
| C | Mn | P max | S max | Si | Cr | Mo | Others | ||
| P92 | K92460 | 0.07-0.13 | 0.30-0.60 | 0.020 | 0.010 | 0.50 max | 8.50-9.50 | 0.30-0.60 | V 0.15-0.25 |
| N 0.03-0.07 | |||||||||
| Ni 0.40 max | |||||||||
| Al 0.02 max | |||||||||
| Cb 0.04-0.09 | |||||||||
| W 1.5-2.00 | |||||||||
| B 0.001-0.006 | |||||||||
| Ti 0.01 max | |||||||||
| Zr 0.01 max | |||||||||
5. Available Size Range
| OD | Thickness | ||
| mm | inch | mm | SCH |
| 88.9~1422 | 3''~ 56'' | 2.11~140 | ≥SCH10 |
| *If the steel grades and size you are looking for are not listed above, please contact us for further information. | |||
6. Tensile Requirements
Tensile Strength min.: 90ksi620MPa
Yield Strength min.: 64ksi/440MPa
7. Inspection & Test
Chemical composition, mechanical properties ( tensile strength, yield strength, elongation, flaring, flattening, bending, hardness, impact test), surface and dimension, NDE, hydrostatic test.
8. Manufacture
Hot Rolled or Cold Drawn
9. Manufacturing Process
Raw Material Inspection → Cold Centering → Heating → Piercing & Rolling → SIzing → Heat Treatment → Testing → Finishing → NDE → Visual & Dimension Inspection → Marking → Storing & Shipping
10. Supplementary Requirements
S1 Product Analysis
S2 Transverse Tension Test
S3 Flattening Test
S4 Metal Structure and Etching Test
S5 Photomicrographs
S6 Photomicrographs for Individual Pieces
We can also accept additional requirements beyond of standard, including chemical composition:
| C | 0.07-0.13 | Mo | 0.30-0.60 | Cu | 0.10 max | Sn | 0.010 max |
| Mn | 0.30-0.50 | W | 1.50-2.00 | Al | 0.020 max | Sb | 0.003 max |
| P | 0.020 max | Ni | 0.20 max | B | 0.001-0.006 | N/Al Ratio | 4.0 min. |
| S | 0.005 max | V | 0.15-0.25 | Ti | 0.01 max | Pb | Content of Pb shall be measured and reported. |
| Si | 0.10-0.40 | Cb | 0.04-0.09 | Zr | 0.01 max | ||
| Cr | 8.5-9.5 | Ni | 0.035-0.070 | As | 0.010 max |
Some elements that are required in above table are not required to be reported by the applicable ASME or ASTM specification.
Additional Normalizing Requirement
| Normalizing Temperature Range | Hold Time | Minimum Cooling Rage | |
| Wall Thickness (T) | Min. Hold Time after Surface Temperature has exceeded 1900°F (1040°C) | ||
| 1900-1975°F (1040-1080°C) | T≤2 in (50mm) | 15 minutes | 9°F (5°C) per minute above 900°F (482°C) Cooling shall be continuous to below 200°F (95°C) |
| 2 in (50mm)<T≤3 in (75mm) | 30 minutes | ||
| 3 in (75mm)<T≤4 in (100mm) | 45 minutes | ||
| 4 in (100mm)<T≤5 in (125mm) | 75 minutes | ||
| 5 in (125mm)<T≤6 in (150mm) | 90 minutes | ||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Trading Company,Seller,Other
Year Established:
2006
Total Annual:
5000000-30000000
Ecer Certification：
Active Member
Since 2006, NEW FORCE has been engaged in high end seamless steel pipe products such as thermal power pipes, nuclear power pipes, petrochemical & refinery pipes, mechanicl pipes, oil & gas pipes, and gas cylinder pipes. The company have complete QA system and various inspection methods.... Since 2006, NEW FORCE has been engaged in high end seamless steel pipe products such as thermal power pipes, nuclear power pipes, petrochemical & refinery pipes, mechanicl pipes, oil & gas pipes, and gas cylinder pipes. The company have complete QA system and various inspection methods....
Get in touch with us
Leave a Message, we will call you back quickly!