Equipments Making AISI ASTM ​304L Stainless Steel Sheet

Product Specification

AISI/ASTM​304L Stainless Steel Sheet With Wiredrawing/Mirrow Surface Used To Make Equipments
 
1. Description 

ASTM304L stainless steel is a very common stainless steel. Because of its corrosion resistance, high temperature resistance and good processing performance, 304L stainless steel sheet is widely used. There are three common marking methods on the market: 0Cr19Ni10,304L and SUS304L. Among them, 0Cr19Ni10 is produced according to national standard, 304L is produced according to ASME standard, and SUS 304L is produced according to Japanese standard.

304L is a kind of universal stainless steel, which is widely used to make equipment and parts requiring good comprehensive performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 16% chromium and more than 8% nickel.

Surface quality--Stainless steel sheet is a very expensive material. Customers also have very high requirements for its surface quality. However, in the production process of stainless steel sheet, various defects, such as scratches, pockmarks, creases, pollution and so on, are inevitable. So it affects the surface quality, such as scratches, creases and other defects. These defects are not allowed in the actual supply, whether it is high-grade or low-grade materials. The pockmarks are also not allowed in spoon, spoon, fork and production, because it is difficult to discard them in polishing. According to the degree and frequency of various defects on the surface, we determine the surface quality level, so as to determine the product level.

Thickness tolerance-- Generally speaking, the thickness tolerance of raw materials is different for different stainless steel products. For example, for class II tableware and heat preservation cup, the thickness tolerance is generally high, which is - 3 ~ - 5%. While the thickness tolerance of class I tableware is generally required to be - 5%, steel pipe is required to be - 10%, the thickness tolerance of materials for hotel freezer is required to be - 8%, and the thickness tolerance of dealers is generally required to be - 4% - 6%. At the same time, the difference between the internal and external sales of products will also lead to different requirements of customers on the thickness tolerance of raw materials. In general, the thickness tolerance requirements of export customers are relatively high, while that of domestic enterprises is relatively low (mostly due to cost considerations), and some customers even require - 15%.

Weldability-- The requirements for weldability are different for different purposes of products. A class of tableware generally does not require welding performance, even including some pot enterprises. But most products need good welding performance of raw materials, such as class II tableware, heat preservation cup, steel pipe, water heater, water dispenser, etc.

Corrosion resistance-- Most stainless steel products require good corrosion resistance, such as class I and II tableware, kitchenware, water heaters, drinking fountains, etc. some foreign businessmen also conduct corrosion resistance tests on the products: use NaCl water solution to warm to boiling, after a period of time, pour out the solution, wash and dry, weigh the weight loss, to determine the degree of corrosion (Note: when the product is polished, because the abrasive cloth or sandpaper contains The presence of Fe will cause rust spots on the surface during the test.)

Polishing performance (BQ)-- At present, stainless steel products generally go through the polishing process in production, and only a few products, such as water heater, water dispenser inner tank, do not need polishing. This kind of stainless steel plate material of our company has good polishing performance.

 
Thickness that we offer
1) Thin plate (0.2mm-4mm)
2) Medium plate (4mm-20mm)
3) Thick plate (20mm-60mm)
4) Extra thick plate (60-115mm)
 
Board width that we offer
1000mm, 1220mm, 1250mm, 1500mm, 1800mm, 2000mm
 
2. Chemical composition

 
3. Physical Properties

 
4. Delivery surface states
 
We offer various surface treatment states. Normally, wiredrawing, mirror (8K), oil film (HL), titanium plating, cutting, folding, bending, punching, rolling, embossing, punching, gouging, laser, water knife cutting, etc. 
 
Some abbreviated forms of surface treatment name
No.1 - A rough, matte surface that is hot rolled to a specified thickness, annealed, and descaled for use without surface gloss
1D - the surface has discontinuous particles, also known as fog surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2D - slightly glossy silver white. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2B - silvery white, better gloss and flatness than 2D surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling.
BA - excellent surface gloss, high reflectivity, like mirror surface. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenching and tempering rolling.
NO.3 - good glossiness and rough surface. Processing technology: polishing and tempering rolling of 2D products or 2B with 100-120 abrasive materials (JIS R6002).
NO.4 - good glossiness and fine lines on the surface. Processing technology: polishing and tempering rolling of 2D products or 2B with 150-180 abrasive material (JIS R6002).
HL - silver gray with hairline. Processing technology: polishing 2D or 2B products with appropriate abrasive materials to make the surface appear continuous grinding lines.
Mirro - in mirror state. Processing technology: grind and polish 2D or 2B products with appropriate abrasive materials to mirror effect.
 
5. Details picture
 
6. Standards table