Heated Compressed Adsorption Air Dryer Less Regeneration Gas Consumption

Product Specification

Adsorption Dryers Compressor
5RD Adsorption Dryers Compressor 0.8Nm³/min micro heated Compressed air dryer
 
Features
Less regeneration gas consumption and low energy consumption;
The finished gas has stable dew point;
It is controlled by micro-computer;
It has functions of diagnosis, alarming and automatic troubleshooting for several failures;
Reasonable structure and design makes the operation and maintenance easy;
It has the function of online parameter modification and protection;
Saving energy at the uttermost (optional).
 
 
⊙ Working Principle of Adsorption Dryer
      A large number of air compressor from the inflow of imported diameter, through air control valve: the two entered a drying tower in the bottom, when the air flow to the tower, one of the Humidity will be by suction alumina desiccant stem. So, it will enable the discharge of the air compressor dew point temperature dropped to -40℃,and reached a dehumidification effect. The entire system takes 10 minutes. The entire circulatory system is as follows: When a tower in the desiccant or operation of five minutes, while the other tower is renewable and clean only 4.5 minutes, continued pressure only 30 seconds, so the two towers interactive operation of such duplication. When the machine was operating renewable wind of 12 percent. Superior design, saving maintenance costs.
 
⊙ Adsorption dryer configuration schematics

 
⊙ High efficiency heat exchanger
 
➤ Adopting high strength thick copper pipe and oxygen-free welding with quotient silver content electrode; long service life and high heat transfer efficiency.
➤ Adopting anaerobic welding method, the system is free of impurities and keeps the system clean. The whole series of copper tubes are manufactured by mechanical expansion, which are closely combined with fins, with low heat transfer impedance and high heat transfer efficiency.
➤ The coil is cleaned by sound wave and there is no residual oil. It is not easy for eel slices to stick dust, and no carbonization occurs during welding.
➤ Adopt the anaerobic welding method to ensure the cleanliness of the system.
 
⊙ Adsorption Dryers Compressor Specification

 
 
      The biggest usage condition:A.Entrance temperature 40℃ B.The air pressure 10Kg/cm³; Rebirth breeze quantity 12%;
      Girculation time be 5 minutes; Time of rebirth is 4.5minutes;
      Continous press time for 0.5 minutes; The atmospheric pressure of the dewdrop temperature 40℃; The power supply is 10 Ф 220V 50 Hz/60Hz.
 
⊙ Combined dryer    

 
——FAQ——
1 What trade terms do we provide? What kind of settlement currency do we offer?
    Trade term :CIF ,CFR ,FOB,Ex-Works
As far Our business traded in Dollars ,Euros and RMB .
2 How long is our delivery?
   Our standard delivery time is 30-40 days after confirmation order & receiving recipets for standard compressors, for the other non standard requirement will be discussed case by case.
3 What is the voltage of the compressor?
   The available voltage include 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the same time we provide other voltage according to customer requirement.
 
4 Can our compressor run in high temperature environment? What is the working temperature range for our machine?
    Yes ,our machine would run in high temperature environment ,until now our products have been sold to many countries which would meet high temperature in summer ,such like Iraq, Saudi Arabia, Egypt, Algeria, etc.
Work temperature range :1-45 ℃(33.8℉-113℉)
 
5 What’s the min. Order requirement ?
    Min. Order requirement is 1PCS.