Silver Grey 45gsm Insect Proof Garden Netting 0.6 * 0.6mm Odorless For Small

Product Specification

0.6*0.6mm 45gsm Odorless Insect Mesh Netting For Adjust Soil Temperature

Steps and methods for constructing insect nets

The construction method and construction procedure of the plastic insect net have a great influence on the firmness of the construction. If the method of erection is not correct, the final pest control effect will be poor. How do we construct a plastic insect net? Learn more about it and hope to help you.

The first is the erection of plastic insect nets according to the height of fruit trees to set up the column, the column must exceed the height of the fruit tree more than one meter five. The horizontal direction of the steel pipe is set every 20 meters in the horizontal direction and the bottom is to be irrigated with cement. The depth of the irrigation cement is about 70 centimeters. There is also that our anchors should be fixed to the ground so that they can guarantee the stability and stability of the columns. The anti-bird net erects a grid of horizontal and vertical wires connected to one another. After the two ends of the wire are fixed, the wire must be tightened with a tightener, and then fixed, and the next step can be used to frame the net.

There is also we need to follow the pace to wear nets. Put the mesh on the shelf and fix the two edges of the mesh line. First, wear the net of Skynet, open the plastic insect net, find the width of the net, and use the net line to put the grid on. We must also pay attention to installing the reinforcement edge. For more information, please continue to follow our website.

Insect net cover should pay attention to avoid clinging to the film

When covering the insect nets, it is necessary to pay attention to the correct coverage method to obtain good results. One of the points that we should pay attention to when we are covering is to avoid the insect nets sticking to the film. Why do you do that? This is because there are two avoidances if they stick to the film. Then, when we are using, what issues should we pay attention to?

1. If the insect nets are closely attached to the shed film, the absorbed heat will be more easily transmitted to the interior of the shed film, thereby weakening the effectiveness of the insect nets in reducing the shed temperature.

2, close to the film so that the heat can not be distributed, but increased the temperature of the insect network itself, it will speed up the aging of the insect network.

3. Insect nets make full use of the existing facilities in the area to cover cultivation. When using shades to cover shade in the summer, it is not suitable to cover the entire shed. Generally, 1 to 1.5 meters of the shed side is not covered with insect nets to prevent rotting; floating surface is covered with insect nets. Generally, it is limited to vegetable sowing after germination, and should be erected immediately after emergence and replaced with shed type; When covering, the width of the insect-proof net should be left with sufficient space. After the cover is covered with a nylon rope, the insect-proof net should be tightly fastened and secured tightly to prevent it from being blown off by the wind.

Therefore, the insect net is best to have a certain space away from the greenhouse film, so that it is conducive to the growth of greenhouse plants.

When we cover insect nets, it is very important to adopt a scientific coverage method so that we can get good results.