WUXI JINQIU MACHINERY CO.,LTD.
| Packaging Details | properly rust-proof treatment, plywood case |
| metal sheet coil | suitable thickness 0.3-3.2mm |
| coil width | 0--1300mm |
| function | automatic feeding for hydraulic press or mechanical press machine |
| Brand Name | JINQIU |
| Model Number | NCSF5 |
| Certification | ISO, CQC,SGS |
| Place of Origin | China-Wuxi Jinqiu Machinery Co.,ltd |
View Detail Information
Explore similar products
Medium Thickness Sheet 3 In 1 Coil Feeding Line For Mild Steel / Aluminum Steel
0.6 - 6.0 Mm Thickness 3 In 1 Coil Feeding Line Coil Feeder Machine For Auto
Electric Parts Coil Feeding Line Uncoiling / Straightening / Feeding High
Kitchen Hardware Coil Feeding Line High Precision Thin Plate Uncoiler And
Product Specification
| Packaging Details | properly rust-proof treatment, plywood case | metal sheet coil | suitable thickness 0.3-3.2mm |
| coil width | 0--1300mm | function | automatic feeding for hydraulic press or mechanical press machine |
| Brand Name | JINQIU | Model Number | NCSF5 |
| Certification | ISO, CQC,SGS | Place of Origin | China-Wuxi Jinqiu Machinery Co.,ltd |
| High Light | coil feeder machine ，decoiler straightener feeder | ||
3 in 1 Standard thinner material coil feeding line : uncoiler, straightener, and feeder
Model:
NCSF5
Usage:
For 0.3-3.2 mm thinner sheet thickness coil uncoilling, straightenning, and feeding
Characteristic:
1. This machine 3 in 1 adopts coil bottoom inlet mode. It is suitable for 0.3--3.2 mm thickness material with 0-1300mm width coil punching uncoiling, straightening and feeding
2, press arm with pneumatic mode can avoid coil loose, and mathced with material inlet plate to press the coil head flat, and let the material smoothly ienter into the machine.
3, we use 11 pcs of straightening rollers, and rollers material is high strength bearing steel GCr15 with quenched and tempered by high frequency treatment, surfaace hard chrome hardness can reach HRC60 ~ 62 degrees, the dimensional accuracy 0.01mm, which strictly ensures straighening roller surface smoot, during the straightening procee, to make ensure the coil material surface performance
4, The materil on the uncoilling frame is controlled by below photoelectric device, the straightening head can make material straightening, and at the same time, send the length-setting materail to the punching or press machine, and throught the punching machine gives signal, the uncoiler looses the material, and press down, and guide material
5, the auxiliary device is operated by air or electricity as the power source, simple operation, easy maintenance, after debugging, the failure rate is low.
6. The feeding trolley device can be used to save the feeding time, improve work efficiency, save manpower and achieve manual operation.
Machine Overall Size Drawing:
Stranghtening Performace Charte:
| Model | material thickness [mm] | ||||||||
| 0.3 | 1.3 | 1.6 | 2.0 | 2.3 | 2.5 | 2.8 | 3.2 | ||
| feeding width [mm] | NCSF5-400 | 400 | 300 | 230 | 150 | 110 | |||
| NCSF5-500 | 500 | 400 | 360 | 300 | 230 | 150 | 110 | ||
| NCSF5-600 | 600 | 470 | 360 | 300 | 230 | 150 | 110 | ||
| NCSF5-800A | 800 | 480 | 360 | 370 | 320 | 250 | 220 | ||
| NCSF5-1000A | 1000 | 430 | 350 | 330 | 290 | 250 | 200 | ||
| NCSF5-1300A | 1300 | 430 | 350 | 330 | 290 | 250 | 200 | ||
Machine Models:
| Model | NCSF5-400A | NCSF5-500A | NCSF5-600A | NCSF5-800A | NCSF5-1000A | NCSF5-1300A |
| Material width[mm] | 50～400 | 50～500 | 50～600 | 70～800 | 70～1000 | 70～1300 |
| Material thickness[mm] | 0.3-3.2 | |||||
| Max coil weigth [kg] | 3000(5000) | 5000(7000) | ||||
| coil inner diameter[mm] | ￠508 | |||||
| coil outer diameter [mm] | ￠1200 | ￠1400 | ||||
| max speed[m/min] | 16 | 22 | ||||
| feeding accuracy [mm] | ±0.15 | |||||
| straightening rollers [mm] | ￠48×11 pcs(up 6/ bottom 5) | ￠48×7 pcs( up 4/ bottom 3) | ||||
| feeding rollers [sets] | 1 | |||||
| feeding heights[mm] | 1150±100 | 1200±100 | ||||
| voltages | 220VAC 60HZ/AC380v 50HZ | |||||
| air pressure[kg/cm2] | 5 | |||||
| coil expansion mode | hydraulic | |||||
| servo motor[kw] | AC3.0 | AC4.4 | AC5.5 | |||
| uncoiler motor [kw] | 1.5(2.2) | 2.2(3.7) | ||||
Company Details
Business Type:
Manufacturer
Year Established:
1969
Total Annual:
30,000,000-38,000,000
Employee Number:
280~300
Ecer Certification：
Verified Supplier
WxiJiniu Machinery Co.,ltd. formerly known as Wuxi Metallurgical Machinery Factory, registered trademark for "Jinqiu" brand, was founded in June 1969. It is in Wuxi city, 150 kilometers far from Shanghai city. We have been to stated enterprise, since 2002, we recombined to privat... WxiJiniu Machinery Co.,ltd. formerly known as Wuxi Metallurgical Machinery Factory, registered trademark for "Jinqiu" brand, was founded in June 1969. It is in Wuxi city, 150 kilometers far from Shanghai city. We have been to stated enterprise, since 2002, we recombined to privat...
Get in touch with us
Leave a Message, we will call you back quickly!