Cylinder Crystal Candle Holder Wedding Centerpieces 9 Arms Glass

Product Specification

Hot sale gorgeous wedding centerpieces 9 arms glass cylinder crystal candelabra 

Product Description

Product name:	Hot sale gorgeous wedding centerpieces 9 arms glass cylinder crystal candelabra
Material:	Crystal/glass
Decoration:	wedding event,home,party
Package:	1 piece / carton,safe packages,good foam with carton
Size:	H:120cm*W:50cm
Color:	Clear

Related Products

Company Profile

Our Advantages

Certifications

Packing & Delivery

FAQ

Contact US

 Characteristic

How to prevent crystal candle holders from turning yellow?

Based on the search results, we can summarize the following methods to prevent crystal candlesticks from turning yellow:

1. Cleaning and maintenance methods
Regular Cleaning: Crystal candle holders should be cleaned regularly to remove surface dirt and grease that may cause the crystal to turn yellow. When cleaning, wash with lukewarm soapy water and then rinse with clean water.
Avoid Improper Cleaning Methods: Avoid using highly acidic or alkaline solutions to clean your crystal as this may cause discoloration or damage to the crystal.
Proper storage: When the crystal candle holder is not in use, it should be stored in a well-ventilated place and avoid contact with other items to prevent damage or discoloration caused by collision.

2. Avoid exposure to harmful environments
Avoid direct sunlight: Crystal candle holders should avoid prolonged exposure to sunlight, as light will accelerate the yellowing process of candles.
Control temperature and humidity: Crystal candle holders should be stored in an environment with appropriate temperature and humidity. Excessive temperature or humidity may cause the crystal to discolor.

3. Use quality products
Choose high-quality crystal: When purchasing crystal candle holders, you should choose real crystal rather than fake crystal. Real crystal is harder and does not change color easily.
Use high-quality candles: The quality of the candle will also affect the color change of the crystal candle holder, so choose better quality candles.

Through the above methods, we can effectively prevent the crystal candle holder from turning yellow, extend its service life and maintain its beauty.

Crystal candle holder installation tips

The installation of crystal candle holders requires certain skills and precautions. Here are some key steps and points.

installation steps
Prepare tools and materials: Before starting installation, you must first prepare the required tools and materials, including impact drills, expansion screws, adjustable wrenches, etc.

Fix the back strip: Use expansion screws to fix the back strip to the ceiling. The hole depth is generally about 5 cm. Then fix the lamp panel to the back strip with screws, and use screw caps to secure the entire lamp.

Connect the wires: After fixing the crystal lamp on the ceiling, tear off the protective film on the main part, and connect the wires on the crystal lamp to the wires reserved on the ceiling. For safety reasons, be sure to turn off the power switch in your home when connecting electrical cords.

Inspection and debugging: After the installation is completed, inspection and debugging are required to ensure that all parts are installed in place and the lamps can be used normally.

Installation Precautions
Pay attention to stability: The weight of the crystal lamp is not light. When installing, not only the load-bearing capacity of the top surface must be considered, but also the stability of the back strip and lamp panel must be taken into consideration. All screws used to fix the crystal lamp must be tightened, especially the expansion screws of the back strip and the lamp panel. Be sure to tighten them completely to avoid the lamp from shaking.

Pay attention to power outages: The installation of any lamp must be carried out with the power outage, and crystal lamps are no exception. When installing, be sure to disconnect the power supply at home first, especially when connecting wires and installing light bulbs, to avoid the risk of electric shock and threats to life safety.

Accessories should be handled with care: the crystal balls or crystal beads in crystal lamp accessories are generally synthetic. Although the hardness is not as good as natural crystal, it is not easy to wear and tear. However, if the accessory has a glass tube, it will be difficult to connect in series and You need to pay special attention when fixing it. Be sure to handle it with care to avoid breaking the glass tube.

Pay attention to the height: When installing the pendant crystal lamp, you need to pay attention to the height of the lamp. Since crystal lamps generally have crystal pendants, these hanging pendants will extend the volume of the lamp vertically. If the installation height is too low, it will not only cause a sense of oppression, but also the dazzling light will make people uncomfortable. At the same time, hanging the pendant down may also cause safety problems.

How to install and stabilize crystal candlesticks

Stability is one of the key factors when installing crystal candle holders. The following are the installation steps and precautions compiled based on the search results to help you ensure the stable installation of crystal candle holders.

1. Preparation
Before starting the installation, you first need to have all the necessary tools and materials ready. This includes, but is not limited to, tools such as impact drills, expansion screws, adjustable wrenches, and lighting accessories. Make sure all accessories are present and that the fixture itself is not damaged or cracked.

2. Installation steps
Step 1: Fix the hanging board. After determining the installation position of the hanging board, use expansion screws to fix it. At the same time, lead the power cord out from the hanging board in case you need to connect the wire later.

Step 2: Install the main body of the lamp. Fix the main part of the lamp on the ceiling, use the back strip to determine the specific installation position on the ceiling, and use an electric drill to drill holes. Then use expansion screws to secure the back strip to the top surface. Make sure all screws are tightened and secure to ensure safety during subsequent use of the lamp.

Step 3: Connect the wires. Connect the wires fixed to the crystal lamp to the wires reserved on the ceiling. For safety reasons, be sure to turn off the power switch in your home when connecting electrical cords. In addition, the neutral wire and live wire must be connected correctly and fixed with insulating tape to prevent leakage and endangering the safety of users.

Step 4: Install the accessories. According to the installation drawing, put on the bead curtain of the crystal lighting and hang up the accessories. If there is a crystal lighting with a glass tube, be sure to handle it with care to avoid breaking the glass tube.

Step 5: Testing and debugging After all the light bulbs are fixed, they need to be tested. Turn on the power and test by turning off the switch to ensure that all light bulbs can be used normally. If problems are found, the cause needs to be checked promptly and adjustments made.

3. Installation precautions
Pay attention to the stability. The weight of the crystal candle holder is relatively heavy, and the various hanging decorations on the bottom will make it even heavier. Therefore, when installing, not only the load-bearing capacity of the top surface must be considered, but the stability of the back strips and light panels must also be taken into consideration. All screws used to fix the crystal candle holder must be tightened, especially the expansion screws of the back strip and the lamp panel. Be sure to tighten them completely to prevent the lamp from shaking.

Pay attention to power off. For safety, remember to cut off the power supply before installing the crystal candle holder. Be careful to disconnect the power supply. Even normal cleaning and repairs need to be carried out when the power is cut off to prevent electric shock accidents and threats to life safety.

Handle with care. Crystal pendants are crystal clear and have a strong decorative effect. However, they are fragile and difficult to recover once damaged. Therefore, handle it with care during installation to avoid defects or breakage that will affect the aesthetic effect.

Pay attention to the height. When installing the hanging crystal candle holder, you need to pay attention to the height of the lamp. Because crystal candlesticks generally have crystal pendants, these hanging pendants will extend the volume of the lamp vertically. If the installation height is too low, it will not only cause a sense of oppression, but the dazzling light will also make people uncomfortable. At the same time, hanging the pendant down may also cause safety problems.

With the above detailed installation steps and precautions, you can better understand how to securely install crystal candle holders. Always ensure that all safety regulations are followed during operation, and if you are unsure about anything, it is best to seek professional help.

Crystal Candlestick Safety Debugging Guide

Before debugging, please make sure you fully understand the structure and working principle of the crystal candle holder. If you are unsure about the construction and use of candle holders, it is recommended that you consult a professional or manufacturer
The safety steps for debugging crystal candlesticks are as follows:

Make sure the candle holder is placed on a stable surface: Before lighting the candle, make sure the candle holder is placed on a stable surface to prevent the candle holder from tipping over. Try to avoid placing candlesticks in unstable locations, such as edges, slopes, or areas prone to impact.

Check the stability of the candle holder: Before using the candle holder, check that it is structurally sound. Do not use if anything is loose or damaged. When it's time to repair or replace your candle holder, contact a professional.

Use the Right Candle: Make sure the candle you use is the right size for your crystal candle holder and does not exceed the candle holder's burning container. Candles that are too large can cause the candle holder to overheat and even cause a fire.

Keep the candle holder clean: Regularly clean wax scale and other dirt on the candle holder to ensure the normal operation of the candle holder. Please use a soft cloth to gently wipe the surface of the candle holder to avoid scratching the crystal.

Keep flammable items away from the candle holder: Before lighting the candle, make sure there are no flammable items around it, such as paper, cloth, furniture, etc. Keep a safe distance from the candlestick.

Monitor the Burning of the Candle Holder: During the burning process, pay close attention to the burning condition of the candle. If you find that the candle burns unevenly, the flame is too large, or black smoke is produced, please extinguish the fire source immediately and reposition the candle.

Use caution when extinguishing candles: When extinguishing candles, use a long-handled match or lighter and avoid direct contact with the candle with your hands. In addition, after extinguishing the candle, please wait for the candle to cool before performing other operations.

Please note when storing the candle holder: When the candle holder is not in use, please store it in a dry, cool place away from direct sunlight and moisture. Also, keep the candle holder out of the reach of children and pets.

The above are some basic steps for safe debugging of crystal candlesticks. To ensure your safe use, please be sure to follow the above recommendations. If you have any other questions, please feel free to ask.

Solutions to common problems in crystal candlestick installation

There are some common problems you may encounter when installing crystal candle holders. Here are some possible problems and their solutions.

Problem 1: Lamp installation is not stable enough
Solution: Ensuring that the light fixture is securely mounted is an important step in the installation process. When installing crystal candle holders, you need to consider the load-bearing capacity of the ceiling and the stability of the lamp itself. The screws used to fix the lamp must be tightened, especially the expansion screws on the back strip and lamp panel. Be sure to tighten them completely to avoid the lamp from shaking. In addition, the bearing capacity of the nut holding the entire lamp must match the overall weight of the lamp to prevent it from falling due to insufficient bearing capacity.

Problem 2: The power was not cut off during the installation process
Solution: When installing any lamp, it must be done with the power off to prevent electric shock accidents. When installing a crystal candle holder, be sure to disconnect the power to your home first, especially when connecting wires and installing light bulbs.

Question 3: Installation of crystal candlestick accessories
Solution: Crystal candle holder accessories require special care when installing. Crystal balls or crystal beads are generally synthetic. Although the hardness is not as good as natural crystal, it is not easy to wear. But if there are glass tubes in the accessories, you need to pay special attention when connecting and fixing them. You must handle them with care to avoid breaking the glass tubes.

Problem 4: The installation height of the crystal candlestick is inappropriate
Solution: When installing hanging crystal candle holders, you need to pay attention to the height of the lamp. Since crystal candlesticks generally have crystal pendants, these pendants hanging down will extend the volume of the lamp lengthwise. If the installation height is too low, not only will it cause a sense of oppression, but the dazzling light will also make people uncomfortable. At the same time, hanging the pendant may also cause safety problems. Therefore, the height of the lamp should be reasonably selected according to the actual situation during installation.

Problem 5: Insufficient installation tools
Solution: Before installing the crystal candle holder, you need to prepare all the tools and materials that may be needed, such as screwdrivers, pliers, hammers, paintbrushes, electric drills, etc. If you don’t know what tools are needed, you can prepare them according to the instructions in the manual to avoid trouble in later installation.

Through the above solutions, you can effectively avoid the problems encountered during the installation of crystal candlesticks and ensure the safe and stable operation of the lamps.