Payment Terms | T/T |
Supply Ability | 100000000 Pieces |
Delivery Time | 15-21 work days |
Packaging Details | 200pcs/ bag,carton size:45cm*31cm*34cm,inner box:29.2cm*21cm*31.3cm,a carton inside two inner boxs , 4000pcs/ box |
Fetures | Very low loss at high frequency, suitable for high current |
Capacitance: | 0.33uf |
Rated Voltage: | 250-310V |
Operating Temperature | -40℃~+110℃ |
Quality | 100% Brand New & Original |
Package Type | Through Hole |
Brand Name | CG |
Model Number | X2-474K-275VAC-E41 |
Certification | VDE,CQC |
Place of Origin | DongGuan China |
View Detail Information
Explore similar products
0.022UF 250-310V X2 Safety Capacitor Anti Interference Capacitor Long Service
Small Loss 0.33 Uf 275VAC X2 Safety Capacitor 154K For Power Supply / Ammeter
125K 125VAC Capacitor 1.2 UF Withstanding Surge Voltage Stressing
185K 125VAC X2 Safety Capacitor 1.8 Uf Good Properties In Damp Environment
Product Specification
Payment Terms | T/T | Supply Ability | 100000000 Pieces |
Delivery Time | 15-21 work days | Packaging Details | 200pcs/ bag,carton size:45cm*31cm*34cm,inner box:29.2cm*21cm*31.3cm,a carton inside two inner boxs , 4000pcs/ box |
Fetures | Very low loss at high frequency, suitable for high current | Capacitance: | 0.33uf |
Rated Voltage: | 250-310V | Operating Temperature | -40℃~+110℃ |
Quality | 100% Brand New & Original | Package Type | Through Hole |
Brand Name | CG | Model Number | X2-474K-275VAC-E41 |
Certification | VDE,CQC | Place of Origin | DongGuan China |
High Light | 0.47 Uf X2 Safety Capacitor ,Power Supply X2 Safety Capacitor ,0.47 Uf Capacitor |
High Insulation Resistance 0.47uf 474K 275VAC X2 Safety Capacitor For Power Supply Anti-Electromagnetic Interference
X2 Safety Capacitor.pdf
X2 capacitor function
1. Suppress electromagnetic interference of power supply.
The most common function of the X2 safety capacitor is to suppress the electromagnetic interference of the power supply. It is generally placed at the entrance of the neutral wire and the live wire of the power supply. In the power supply, it is usually used together with the safety Y capacitor. The x-capacitor is a capacitor connected across the two wires (L-N) of the power line to suppress common-mode interference. Y capacitors are capacitors that are connected between the two lines of the power line and the ground (L-E, N-E), and generally appear in pairs to suppress differential film interference. If safety capacitors are not used in the power supply, EMC problems will occur when the power supply is certified, so safety capacitors are indispensable.
2. Resistor-capacitance step-down effect.
In addition to suppressing the electromagnetic interference of the power supply, X2 can also be connected in series in the circuit with a 100~250VAC power supply and used as a RC step-down capacitor. The resistance-capacitance step-down circuit is relatively simple and economical, and is often used in some low-power circuits, such as LED modules and small home appliance control.
Marking
1. CIGU logo:
2. Capacitance:(104K ,0.1μF)
3. Capacitance Tolerance:(K)±10%
4. Rated Voltage:250,275,300,305,310VAC 5. Product Class:X2
6. Product type: MPX
7. Climatic Category: 40/110/56
8. Passive Flammability Class:B
9. China approvals mark:CQC
10. Germany approvals mark:VDE
11. ENEC approvals mark:ENEC
Products Introduction
MPX are winded with metallized polypropylene film dielectric,Non-inductive construction, tinned copper wire leads,and flame retardant epoxy resin coating. They have excellent features of self-healing and good flame retardant according to UL 94-V0
Features
1 Non-induction construction
2 High moisture-resistance
3 Self-healing property
4 Flame retardant type(compliance with UL 94V-0)
5 Very small loss
Construction and main materials of products
Specifications(IEC 60384-14)
Test items | Performance requirements | Conditions of test |
Capacitance | Within the tolerance specified | 1KHz, 1Vrms Max. at 25℃ |
Dissipation Factor | 0.001 (0.1%) Max. | 1KHz, 1Vrms Max. at 25℃ |
Voltage proof | Shall be no abnormality | Between terminals 4.3UR (Vdc) Test of 60sec. |
Between terminal and enclosure UR×200%+1500Vac, 60sec. | ||
Insulation resistance | CR ≤ 0.33μF IR ≥ 15,000MΩ CR >0.33μF IR ≥6,000s | 100±15Vdc, 60sec / 25℃ |
Robustness of terminations | No wire breakage and no damage of capacitor | Tense Strength of Terminal Load Force : 1.0 Kg Holding Time : 10 ± 1sec |
Bending Strength of Terminal Load Force : 0.5 Kg Bending Time : 4 x 90 ゚ | ||
Resistance to soldering heat | (1) Appearance : No visible damage (2) △C/C : ≤ ±5% of the initial value | Solder temperature: 260±5℃ Solder time: 5±0.5sec |
Solderability | 95% of the surface tinning | Solder temperature: 260±5℃ Solder time: 2±0.5sec |
Rapid change of temperature | The capacitors shall be visually examined and there shall be no visible damage. | Lower category temperature: -40℃ Upper category temperature: 110℃ Number of cycles: 5 Duration t1 = 30 min |
Vibration | The capacitors shall be visually examined and there shall be no visible damage | Frequency range: 10~55Hz Course: X,Y,Z (axis) 2h / axis ( 6h in total) Displacement amplitude: 0.75mm |
Test items | Performance requirements | Conditions of test |
Climatic sequence | (1) Appearance : No visible damage (2) △C/C : ≤ ±5% of the initial value (3) DF ( tanδ) : ≤ 0.008 of increased value (4) IR : ≥ 50% of the applicable limits (5) Voltage proof : Normal | Dry Heat Upper Temperature: 110℃ Lower Duration: 16Hrs |
Cold Temperature: -40℃ Duration: 2Hrs | ||
Damp Heat Steady State | (1) Appearance : No visible damage (2) △C/C : ≤ ±5% of the Initial value (3) DF ( tanδ) : ≤ 0.008 of increased value (4) IR : ≥ 50% of the applicable limits (5) Voltage proof : Normal | +40°C and 93% RH, 56 days |
Charge and discharge | (1) Appearance : No visible damage (2) △C/C : ≤ ±10% of the initial value (3) DF ( tanδ) : ≤ 0.008 of increased value (4) IR : ≥ 50% of the applicable limits | Test voltage : √2 x URVAC 50 Hz Charge and discharge: 0.5sec/time Repeated for 10000 cycles |
Endurance | (1) Appearance : No Visible Damage (2) △C/C : ≤ ±10% of the initial value (3) DF ( tanδ) : ≤ 0.008 of increased value (4) IR : ≥ 50% of the applicable limits | 1.25 x UR VAC 50 Hz, once every hour increase to 1,000VAC for 0.1 second, 1,000 hours at upper rated temperature |
Storage conditions
1 t should be noted that the solderability of the terminals may be deteriorted when stored barely in an atmosphere for a long preriods
2 It shouldn't be located in particularly high temperature and high humidity, it must submit to the following conditions(keeping in the original package)
Temperature: 35 MAX Relative humidity:60% MAX
3 Storage period:Losse:12 monthes max (from the manufacturing date marked on the label in package bag)
Enviroment requirement
1 Compliance with the requirement of RoHS.
2 Compliance with the requirement of REACH.
3 Without Halogen(as required).
4 Please see the attachment 2 for the test reprots of the Rohs and Reach by a third party
Quality Control
Product structure
Packing
Plastic bag is the minimum packing.the quantity are100,200,300, 500,1000PCS.
The label of the RoHS include the product name,specification, quantity, lot No,manufacture date etc.
One inner box have N PCS bags
Inner box size (L×W×H)=23×30×30cm Marking for RoHS AND SVHC
One outer box have two Inner boxes
Outer box size (L×W×H)=48×32.2×33cm Marking for RoHS AND SVHC
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Total Annual:
5000000-10000000
Employee Number:
70~100
Ecer Certification:
Verified Supplier
Dongguan Chenglue Electronics Co., Ltd. Number of employees: 152 employees. The company mainly produces and sells: X2 safety capacitors, CBB21/22, metallized film capacitors, Y1/Y2 safety capacitors, varistors. The price is 6%-8% lower than that of peer factories. CBB21/2 capacitors, film suppliers ... Dongguan Chenglue Electronics Co., Ltd. Number of employees: 152 employees. The company mainly produces and sells: X2 safety capacitors, CBB21/22, metallized film capacitors, Y1/Y2 safety capacitors, varistors. The price is 6%-8% lower than that of peer factories. CBB21/2 capacitors, film suppliers ...
Get in touch with us
Leave a Message, we will call you back quickly!