0.96 Inch OLED Module 12864 COG PCB 4 Pins SPI I2C For Medical Device

Product Specification

SFOM096YZ4-12864WB-02 Specification.pdf

PMOLED 0.96" Inch COG+PCB 4 Pins SPI I2C Optional SSD1315 For Medical Device Front Screen

0.96" 12864 OLED SPI, OLED Display Module 12864 I2C Product Introduction

SFOM096YZ4-12864WB-02 is a graphic COG, OLED module with PCB, resolution of 128x64 pixels, diagonal size of 0.96 inches. SFOM096YZ4-12864WB-02 Built-in SSD1315 IC; It supports I2C and SPI interfaces, and has a 1/64 drive duty cycle. It has a PCB form factor of 24.7 × 27 mm with mounting holes on the board and 4x1 metal pins on the module.

The SFOM096YZ4-12864WB-02 has a logic supply voltage of 3V/5V, a display supply voltage of 7.5V (internal start), and a display 50% check board current of 25mA@3.3VDD (typical). The OLED module can operate in temperatures from -40°C to +85°C.

Features

This 0.96-inch OLED displays a 128 x 64 pixel resolution.

This OLED 0.96 inches has an ultra-wide viewing angle – more than 160 degrees.

This 0.96-inch I2C OLED display supports voltage: 3.3V-5V DC.

This 0.96-inch OLED screen is a low-power product, with only 0.04W in normal operation and 0.08W on the full screen.
This 0.96-inch OLED module displays graphic and text information directly on your microcontroller project; It supports a wide range of chips: compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, and more.
This 0.96-inch OLED display module is an embedded driver IC. Only 2 I/O ports are needed to communicate with the 2C/IIC interface

This OLED 0.96-inch 128x64 product is compatible with MMDVM, Pi-Star, and Raspberry Pi.
This 12864 IIC OLED 0.96 inch product has a self-illuminating design, no backlight is required, and the display is self-illuminating; It has high-contrast, bright and clear dots that are very readable even in tiny fonts.
The OLED screen 0.96-inch controller has no embedded fonts inside, and users can create fonts through font generation software.

0.96" 12864 OLED SPI, OLED Display Module 12864 I2C Drawing

0.96" 12864 OLED SPI, OLED Display Module 12864 I2C Product Image 

Factory Facilities and Certificates

Quality Management

1. Quality policy

Provide sound quality and deliver goods on time;

To satisfy requirements of customers with continuous improvement

2. EHS policy

To observe laws and regulations and to prevent and control pollution;

To try to reduce emission and conserve and make full use of resources;

To improve environmental protection awareness and continuously improve the environment;

3. Measures adopted

It will make transparent its quality policy and improve employees’ awareness on quality via training and education;

By implementing ‘5S’ management, it will make office and production spot tidy and orderly and employees well-trained;

It will make sure that the ISO9001 quality guarantee system cover all rounds affecting qualities of products and services before incorporating them to regulated and procedural management and control;

Under the premise that quality is guaranteed, it will reduce production costs including reduction of costs of raw materials and improvement of production and managerial efficiency.

 
Search keyword: OLED 0.96", 0.96 OLED lcd, 0.96" oled display, 0.96 incholed display, oled display 0.96, 0.96 oled display, 0.96" oled display, 0.96 inch OLED display, OLED display 0.96 inch, OLED display 0.96", 0.96 inch OLED lcd display, 0.96" OLED screen, 0.96 inch OLED screen, OLED screen 0.96 inch, OLED screen 0.96", 0.96 inch OLED screen, 0.96 inch SPI OLED, OLED 128x64, 128x64 I2C OLED
 

Contact Us

We love to hear about your projects, If you have any questions, we can be reached at sales2@saef.com.cn