Product Specification

Inconel 718 Seamless Or Welded Nickel Alloy Inconel Pipe / Aerospace Tube Polished  

Xinzheng offers all Inconel 718 Welded Tube for the Oil & Gas and Refinery Industry. The production cost of Inconel 718 tubes is usually higher than Inconel 718 pipe because Inconel NCF 718 Pipes utilizes much more labor, energy, and material. Xinzheng is your superior alternative to Parker Inconel 718 Tubing. 2.4668 Material Tube is available in lengths of 6 metre and 3 metre.orAs required

The main use for ASTM B516 Inconel 718 Tube are for structural purposes such as scaffolding. They are often put to use in applications that call for precise outside diameters. UNS N07718 Tubing can be joined easily, quickly and effortlessly with flaring, brazing, or coupling. ASTM B163 Alloy 718 Seamless Tubing assemblies can also take place through 718 Alloy tube fittings where high standards of construction are needed. These 718 Alloy Polish Tubing available with coupling ends or special end finishes like irregular ends, special screw thread etc. Distributor of Inconel Alloy 718 tubing for all applications including heat exchangers, condensers, & boilers. Welded & seamless Inconel 718 tubes are available to ASTM specifications in sizes from 0.062 in. OD for applications including hypodermic needles, capillary & condensers.

UNS N07718 Seamless Tube are available in round, flat oval, elliptical, rectangular & square shapes with 0.030 in. to 1.250 in. OD, 0.008 in. ID & 0.003 in. to 0.280 in. wall thickness. 718 Alloy Welded Tube is also available in custom sizes, tolerances, tempers & finishes. Our all AMS 5589 Seamless Tube, Alloy WERKSTOFF NR. 2.4668 metric tubing, UNS N07718 u tubes, Alloy 718 seamless tubing, Inconel 718 welded tubing and Inconel 718 coiled tubing meets AMS, ASTM, ASME, Military Spec, AMS 5589 & AMS 5590. Pratt & Whitney-LCS, GE & NADCAP approved. We feature all the AMS 5589 Seamless Tube drawing methods, including tube sinking, stationary, floating, semi-floating plug drawing, pilger, and drawn over mandrel. You are no longer restricted to the industry standard tempers of annealed, 1/8 hard, 1/2 hard, and full hard. We offer Inconel 718 Polished Tube in custom tempers, sizes and surface finishes, all while maintaining the highest levels of precision during every step of the process.

Inconel® 718 Tubes is also known as Nicrofer 5219 Tube, Superimphy 718 Tube, Haynes 718 Tube, Pyromet 718 Tube, Supermet 718 Tube. and Udimet 718 Tube.

317L UNS S31703 Stainless steel Seamless Pipe ,in Round, rectangular, square For boiler ,Gas . Heat Exchanger Tubes   Specification  And  Dimension Rranges

  Inconel 718 Seamless Or Welded Nickel Alloy Inconel Pipe / Aerospace Tube Polished​

other Stainless steel Tubing Dimension ranges :

Inconel 718 Seamless Or Welded Nickel Alloy Inconel Pipe / Aerospace Tube Polished  Application 

 Inconel 718 Pipe Aerospace Applications

Inconel 718 pipe aerospace applications are much in demand because they happen to be one of the strongest structural materials that are obtainable in the world today. Inconel 718 also displays superb magnetic properties and it has an excellent electrical conductivity. Here are some more reasons why Inconel 718 is used in aerospace applications: 1) It is a weight saving alloy. 2) Inconel 718 displays superb resistance to corrosion and oxidation. 3) At high temperatures, Inconel 718 shows low-expansion. 4) At very high temperatures, Inconel 718 shows immense strength. 5) Under conditions of high stress, Inconel 718 has very good creep resistance.

Inconel 718 Tube Density Kg/M3

Inconel 718 tube density kg/m3 is 8193.25 (0.296 lb/in3). The Melting Point of Inconel 718 is 2300 - 2437 °F (1260 - 1336 °C). The Solidus of Inconel 718 is 2300 °F (1260 °C). Inconel 718 Liquidus is 2437 °F (1336 °C). The Chemical Composition of Inconel 718 in percentage is Phosphorus 0.015 max, Carbon 0.08 max, Manganese 0.35 max, Chromium 17-21, Sulfur 0.015 max, Silicon 0.35 max, Columbium 4.75-5.50, Titanium 0.65-1.15, Nickel 50-55, Molybdenum 2.80-3.30, Boron 0.006 max, Aluminum 0.20-0.80, Cobalt 1.00 max, Tantalum 0.05 max, Copper 0.30 max and Iron balance.

Alloy 718 Tubing AMS Numbers

Alloy 718 tubing AMS numbers are AMS 5589 and AMS 5590. The Ultimate Tensile Strength of Alloy 718 is 160000 psi (1100 MPa). The Yield Tensile Strength of Alloy 718 is 160000 psi (1100 MPa). The Rupture Strength of Alloy 718 is 86000 psi (593 MPa). Alloy 718 Elongation at Break is 25%. The Electrical Resistivity of Inconel 718 is 0.000125 ohm-cm. The Magnetic Permeability of Inconel 718 is 1.0011. Inconel 718 Curie Temperature is -170 °F (-112 °C). The Specific Heat Capacity of Alloy 718 is 0.104 BTU/lb-°F (0.435 J/g-°C). The Thermal Conductivity of Alloy 718 is 79.1 BTU-in/hr-ft²-°F (11.4 W/m-K).

Inconel 718 Tubes uses and applications

See the performance and reaction of Inconel 718 Tubes in areas of geothermal, solar energy, oil and gas and pharmaceutical

AMS 5589 Inconel 718 Welded Nickel Alloy Inconel Pipe Aerospace Tube Polished For Oil And Gas ,Pharmaceutical Package

FAQ

Q: Would you provide samples For free?

A: Yes . with on stock specification We provide samples For Free . Freight charge collect

Q: What information should i provide to source for the right products ?
A: Material grade, width, thickness, coating and Purchase quantity , Expected lead time ,etc

Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can choose other ports according to your needs.

Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the price of raw materials.


Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely large or special circumstances occur.

Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit our factory. However, some of the plants are not open to the public.

Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.

Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion during ocean transportation.

Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00, after 22:00, we will reply to your inquiry during the next working day.

AMS 5589 Inconel 718 Welded Nickel Alloy Inconel Pipe Aerospace Tube Polished For Oil And Gas ,Pharmaceutical  Synonyms