Product Specification

00Cr19Ni13Mo3 UNS S31726 2B Finish Stainless Steel Strip 5mm 317L Thin

317L, is a kind of austenitic stainless steel.Mainly used for butterfly valve shaft, butterfly valve sleeve, etc.317L(00Cr19Ni13Mo3, UNS S31726) alloy is an austenitic stainless steel based on molybdenum.Compared with conventional chrome-nickel austenitic stainless steel such as 304 alloy, it has better chemical corrosion resistance.In addition, compared with conventional stainless steel, 317L alloy has higher ductility, stress corrosion resistance, compressive strength and high temperature resistance.It is low carbon grade or L grade, which is resistant to sensitization during welding and heat treatment.

Compared with 316L, 317L steel has better seawater resistance and SCC resistance. It is used for Chemical equipment requiring high corrosion resistance such as Chemical ship, Chemical Product Reactor and so on.

Type 317 is an austenitic chromium-nickel stainless steel with excellent corrosion resistance; Its high Molybdenum content enhances the grade's superior pitting resistance. It is the most corrosion resistant of the 300 Series alloys and possesses the highest tensile and creep strength properties at elevated temperatures.

PRODUCT FORMS:

Sheet, plate , Strip, pipe ,tube ,bar ,profiles

Equivalent Materials
DIN 1.4449
AFNOR Z6CND17-12-04
SAE 317
JIS SUS317
JIS SUS317TP
JIS SUS317TB
JIS SUS317TPY
JIS SUSF317
EN X3CrNiMo18-12-3
EN 1.4449
UNS S31700
ASTM TP317
ASTM 317
ASTM F317
ASTM S31700
ASTM MT317

317 | 317L Thin Stainless Steel Strip Coil Roll Annealed ,2B Hairline Finished 1/8 Hard Tempered Products Specification and Dimension Ranges

321 Stainless Steel Specifications:

ASTM A240 for annealed condition
ASTM A666 for tempered material 

Hot Rolled Strip Available Size

Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 

Cold Rolled Strip Available Size

Width: 4.0~609.6 mm
Thickness: 0.1~3.0 mm

Surface Finish:

2B, 2D, BA, No.3, No.4, No.5, SB, HL, etc

Condition :

ANNEALED CONDITION

Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 38 KSI min (260 MPA min) Elongation: 40%min Hardness: B95 max

TEMPERED 1/16 HARD

Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength (0.2% Offset): 45 KSI min (310 MPA min) Elongation: 40% min

Tempered 1/8 Hard Ultimate Tensile Strength: 100 KSI min (690 MPA min) Yield Strength (0.2% Offset): 55 KSI min (380 MPA min) Elongation: 45% min

TEMPERED 1/4 HARD

Ultimate Tensile Strength: 125 KSI min (860 MPA min) Yield Strength (0.2% Offset): 75 KSI min (515 MPA min) Elongation: 25% min

TEMPERED 1/2 HARD

Ultimate Tensile Strength: 150 KSI min (1035 MPA min) Yield Strength (0.2% Offset): 110 KSI min (760 MPA min) Elongation: 15% < 0.15" 18% > 0.15"

TEMPERED 3/4 HARD

Ultimate Tensile Strength: 175 KSI min (1205 MPA min) Yield Strength (0.2% Offset): 135 KSI min (930 MPA min) Elongation: 10% < 0.15" 12% > 0.15"

TEMPERED FULL HARD

Ultimate Tensile Strength: 185 KSI min (1275 MPA min) Yield Strength (0.2% Offset): 140 KSI min (965 MPA min) Elongation: 8% < 0.15" 9% > 0.15"

Available Steel Grade:

Stainless steel : Type 201, 202, 205, 301, 302, 302B, 303, 303Se, 304, 304L, 302HQ, 304N, 305, 308, 309, 309S, 310, 310S, 314, 316, 316L, 316F, 316N, 317, 317L, 317LMN, 321, 330, 347, 348, 384, 405, 409, 429, 430, 430F, 430FSe, 434, 436, 442, 446, 403, 410, 414, 416, 416Se, 420, 420F, 422, 431, 440A, 440B, 440C,  630 ,  13-8 PH ,15-5 PH , 17-7 PH ,17-4 ph , 904L , A286 ,VG-10 ,  SAE 316 , SAE 316L , SAE 440 ,  SAE 420

Duplex stainless steel : 2205 , 2304 , 2507 

Nickel alloy :  

Titanium and titanium alloys  

317 | 317L Thin Stainless Steel Strip Coil Roll Annealed ,2B Hairline Finished 1/8 Hard Tempered  Application 

317 | 317L Thin Stainless Steel Strip Coil Roll Annealed ,2B Hairline Finished 1/8 Hard Tempered Technical datasheet

CHEMISTRY TYPICAL

Carbon: 0.08 max
Manganese: 2.00 max
Silicon: 0.75 max
Chromium: 18.00-20.00
Nickel: 11.00-15.00
Molybdenum: 3.00-4.00
Phosphorus: 0.045 max
Sulfur: 0.030 max
Nitrogen: 0.10 max

PHYSICAL PROPERTIES 

Density: 0.29 lbs/in3 7.99 g/cm3

Electrical Resistivity: microhm-in (microhm-cm):
68 ° F (20 ° C): 29.4 (74.0)

Specific Heat: BTU/lbl° F (kJ/kg•K): 32 - 212 ° F (0 - 100 °C): 0.12 (0.50)

Thermal Conductivity: BTU/hr/ft2/ft/°F (W/m•K):
At 212 °F (100 °C): 9.4 (16.2)
At 932 °F (500 °C): 12.4 (21.4)

Mean Coefficient of Thermal Expansion: in/inl°F (µm/m•K)
32 - 212 °F (0 - 100 °C): 8.9 x 10-5 (16.0)
32 - 600 °F (0 - 315 °C): 9.0 x 10-5 (16.2)
32 - 1000 °F (0 - 538 °C): 10.3 x 10-5 (18.5)
32 - 1500 °F (0 - 871 °C): 11.1 x 10-5 (18.5)

Modulus of Elasticity: ksi (MPa)
28 x 103 (193 x 103) in tension
11 .2 x 103 (77 x 103) in torsion

Magnetic Permeability: H = 200: Annealed < 1.02 max

Melting Range: 2500 - 2590 °F (1371 - 1421 °C)

FORMS

Coil - Sheet, Strip, Ribbon Wire - Profile, Round, Flat, Square

MECHANICAL PROPERTIES AT ROOM TEMPERATURE PROPERTIES: ANNEALED TYPICAL

Ultimate Tensile Strength: 75 KSI min (517 MPa min) Yield Strength: 30 KSI min (205 MPa min) Elongation: 35% min Hardness: Rb 95 max

PROPERTIES TEMPERED

Type 317 can be cold worked to various tempers. Contact US for additional information.

ADDITIONAL PROPERTIES

FINISHES

# 1 - Hot rolled annealed and descaled. It is available in strip, foil and ribbon. It is used for applications where a smooth decorative finish is not required.
# 2D - Dull finish produced by cold rolling, annealing and descaling. Used for deep drawn parts and those parts that need to retain lubricants in the forming process. # 2B - Smooth finish produced by cold rolling, annealing and descaling. A light cold rolling pass is added after anneal with polished rolls giving it a brighter finish than 2D.
#BA- Bright annealed cold rolled and bright annealed
#CBA- Course bright annealed cold rolled matte finish and bright anneal
#2 - Cold Rolled # 2BA- Smooth finish produced by cold rolling and bright annealing. A light pass using highly polished rolls produces a glossy finish. A 2BA finish may be used for lightly formed applications where a glossy finish is desired in the formed part. Polished - Various grit finish for specific polish finished requirements. 

COLD FORMING

Type 317 can be readily formed and drawn.

HEAT TREATMENT

Type 317 is non hardenable by heat treatment.

317 | 317L Thin Stainless Steel Strip Coil Roll Annealed ,2B Hairline Finished 1/8 Hard Tempered Products display and Package Details 

FAQ

Q: Would you provide samples For free?

A: Yes . with on stock specification We provide samples For Free . Freight charge collect

317 | 317L Thin Stainless Steel Strip Coil Roll Annealed ,2B Hairline Finished 1/8 Hard Tempered Equivalent