Wuxi Zhongxin Special Steel Co.，Ltd
| Payment Terms | L/C, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 4000 MT PER week |
| Delivery Time | 5-15 Days |
| Packaging Details | Standard seaworthy export package |
| Trademark | |
| STANDARD | EN 10029 ; EN 10051 |
| THICKNESS | 2MM-103MM |
| WIDTH | UP TO 3350MM |
| Length | UP TO 14630MM |
| Brand Name | |
| Model Number | 500 |
| Certification | SGS |
| Place of Origin | SWEDEN |
View Detail Information
Explore similar products
130mm Abrasion Resistant Steel Plates Metals TUV For Excavator Buckets
Audited 2mm Ar450 Steel Plate Wear Resistant For Mining Applciation
450 Welding EN 10051 Abrasion Resistant Steel Plates
600/400 EN 10021 3mm Thick Hot Rolled Steel Plates Wear Resistant JFE-EH-C400
Product Specification
| Payment Terms | L/C, D/P, T/T, Western Union, MoneyGram | Supply Ability | 4000 MT PER week |
| Delivery Time | 5-15 Days | Packaging Details | Standard seaworthy export package |
| Trademark | STANDARD | EN 10029 ; EN 10051 | |
| THICKNESS | 2MM-103MM | WIDTH | UP TO 3350MM |
| Length | UP TO 14630MM | Brand Name | |
| Model Number | 500 | Certification | SGS |
| Place of Origin | SWEDEN | ||
| High Light | 500 Abrasion Resistant Steel Plates ，500 HBW Abrasion Resistant Steel Plates ，500 HBW wear resistant steel | ||
The bendable, weldable and highly abrasion-resistant steel.
® 500 is a bendable and weldable abrasion-resistant steel with a nominal hardness of 500 HBW. Suitable for applications that demand higher wear resistance. ® 500 increases payload and service life while maintaining good processability and toughness.
® 500 is available as plate in
thicknesses of 4.0 – 103.0 mm and as sheet in thicknesses of 2.0 - 7.0 mm.
® 500 plate is available in widths up to 3350 mm and lengths up to 14630 mm.
® 500 sheet is available in widths up to 1650 mm and lengths up to 16000 mm.
More detailed information on dimensions is provided in the dimension program.
| ® 500 plate | 32.1 - 103.0 | 450 - 540 | 1400 |
1) Brinell hardness, HBW, according to EN ISO 6506-1, on a milled surface 0.5 – 3 mm below surface. At least one test specimen per heat and 40 tons. The nominal thickness of supplied plates will not deviate more than +/- 15 mm from the thickness of the test specimen used for hardness testing.
® wear plate is through-hardened. Minimum core hardness is 90 % of the guaranteed minimum surface hardness.
| Grade | Longitudinal test, typical impact energy, Charpy V 10x10 mm test specimen. |
| ® 500 sheet & plate 1) | 37 J/ -40 oC |
1) Impact toughness measured upon agreement. For thicknesses between 3 mm and 11.9 mm, subsize Charpy V-specimens are used. The specified toughness is then proportional to the cross- sectional area of the test specimen, compared to a full-size specimen (10 x 10 mm). Impact testing according to ISO EN 148. Average of three tests.
| Grade | C *) (max %) | Si *) (max %) | Mn *) (max %) | P (max %) | S (max %) | Cr *) (max %) | Ni *) (max %) | Mo *) (max %) | B *) (max %) |
| Sheet | 0.27 | 0.50 | 1.60 | 0.025 | 0.010 | 1.20 | 0.25 | 0.25 | 0.005 |
PS:Plate 0.30 0.70 1.60 0.020 0.010 1.50 1.50 0.60 0.005 .The steel is grain refined. *) Intentional alloying elements.
Length and Width
For plate, the tolerances are according to mill edge standard or tolerances that conform to EN 10 029.
Tolerances conform to EN 10 051 for sheet, tighter tolerances available on request.
Shape
Tolerances according to EN 10 029 for plate and EN 10 051 for sheet.
Flatness
Tolerances according to Flatness Guarantee Class D for plate, which are more restrictive than EN 10 029. For sheet, the tolerances are according to Flatness Guarantee Class A, that offer narrower tolerances compared to EN 10 051.
Surface Properties
According to EN 10 163-2, Class A Subclass 1.
Bending
Bendability for plate is according to Bending Guarantee Class G. For sheet, the bendability is according to Bending Guarantee Class C.
Delivery Conditions
The delivery condition is Q or QT (Quenched or Quenched and Tempered). 500 plates are delivered with sheared or thermally cut edges and thicknesses over 80 mm are delivered with mill edge as standard. 500 sheets are delivered with an as-rolled surface and mill edge as standard.
Fabrication and Other Recommendations
Welding, bending and machining.
500 is not intended for further heat treatment. It has obtained its mechanical properties by quenching and, when necessary by means of
subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 250 C (482 degrees F).Appropriate
health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer
coated plates, may produce dust with a high particle concentration.
General Q and A Questions
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
Q: What information should i provide to source for the right products ?
A: Material grade, width, thickness, coating and Purchase quantity , Expected lead time ,etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality before packaging, and unqualified
products will be destroyed.We provide All original Mill test certificate and support third party inspection.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00, after 22:00,
we will reply to your inquiry during the next working day.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Trading Company,Seller
Year Established:
2016
Total Annual:
10000000-20000000
Employee Number:
100~200
Ecer Certification：
Active Member
Wuxi Zhongxin Special Steel Co.，Ltd is located in Wuxi City, Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transportation. , Wuxi become the biggest stainless steel shee... Wuxi Zhongxin Special Steel Co.，Ltd is located in Wuxi City, Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transportation. , Wuxi become the biggest stainless steel shee...
Get in touch with us
Leave a Message, we will call you back quickly!