Good Quality 110/220VAC 0-5V/PWM Reci W4 CO2 Tube's Dy13 100W CO2 Laser Power

Product Specification

1. Product Features:
It has green color control signal terminal board
1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with CO2 laser tube made by any factories.
2. This laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation.
3. The laser output power can be adjusted by 0-5V analog signal or PWM signal.
4. This laser power supply has open cirsuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function can protect power supply when laser tube burst.

2. Aging test:
Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qulified.

3.Specification:

Power supply warranty:12 months.
Delivery time: 5-7 working days after first payment received for 50PCS purchase quantity.
Package:Carton and foam
Shipping method:DHL,TNT,air shipping or sea shipping which is depends on purchase quantity.
Payment method: T/T,PAYPAL,Western Union
Application:General type power supply and widely used on 40W-150W CO2 laser engraving machine.or cutting machine

4.Common problem on CO2 laser power supply
1. Q:High voltage sparking,
A: The high voltage connector is close to power supply's steel case.
2. Q:No laser output and fan doesn't run
A: Fuse is not connected.
3. Q: Press TEST button(Red),it outputs laser but main control terminal board is not be used to let tube output laser.
A: CO2 power supply's low voltage control section is damaged.
4.Q:Current is not be adjusted.
A: CO2 power supply's current control section is damaged.
5 Q:Fuse always be burned.
A: CO2 power supply's power diode is short circuited.

Summary:
Rubylasertech has more than 10 years experience in develop ,manufacture and sell CO2 laser power supply. It mainly has MYJG and DY series power supply. They are widely used in 60-70% of Chinese laser machine(Many famous machine factories are our business partner.) and they are sold to many countries with machines. During usage, we offer perfect technical support to machine user and distributors, so that they are reassured to use their machine. So it is right choice for you to find Rubylasertech as your business partner. Some sellers quote very low price to attract buyer's attention. YOU WILL GET WHAT YOU PAY in business. Rubylasertech will doesn't take part in this vicious price war. Getting good use experience is what Rubylasertech are doing for customers. Thus it maintains a professional technical service team throughout the year, so that, your product problem or tech question can be resolved or answered in 24 hours. So we don't give you the lowest price but it will be a reasonable price.As a rich development experience power supply pioneer, it always actively listen to feedback from customers and then develop new power supply products. Also we can customize laser power supply on client demand.Power supply are standard product and it can drive most brand CO2 laser tube. Thus it can be used on most brand CO2 laser machine.
 

Shipping:
Each model power supplies are being in rich stock and will be immediately delivered out in 1-2 days after payment is received when your purchase is under 90PCS. If your purchase is more than 90PCS/each model, factory will produce them as fast as possible. The delivery time is not more than 5-7 working days.If purchase is not more than 30PCS, DHL,TNT or Fedex is default shipping method. If purchase is 30-100PCS,air shipping is default shipping method. If purchase is more than 100PCS, sea shipping is default shipping method. If customer need power supply very urgently, please specify before place order and special shipping method will be used.All power supplies bought by customer will be paid insurance during shipping. Customer doesn't worry about lost or damage.
Warranty
Power supply's warranty is one year. However, Rubylasertech will offer technical support to resolve problem during its whole service time.For distributor, power supply warranty can be prolonged which is based on exact purchase quantity.
Technical Support:
Professional team will offers after sales service and technical support. When power supply has problem, please contact with Rubylasertech to get support for installation, wiring connection, adjustment,operation and use failure timely.
Service time:8:00-18:00 local time of each working day in China.
Tel:0086-0531-58181378 /0086-15253146378