Dongguan Zhongli Instrument Technology Co., Ltd.
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 60 Sets |
| Delivery Time | 5-8 work days |
| Packaging Details | IEC 60335 -1 Automatic Pneumatic Reel Endurance Tester for Max. 300cm Reel is packaged within wooden case. |
| Product name | IEC 60335 -1 Automatic Pneumatic Reel Endurance Tester for Max. 300cm Reel |
| Power supply | AC220V 50Hz |
| Working air source | Compressed air 5~7kg/cm2;(air source provided by customer) |
| Driving mode | Pneumatic (compressed air) mode |
| Angle | adjustable from 30 to 70° |
| Stretching stroke | Maximum 1000mm(adjustable) |
| Brand Name | ZL |
| Model Number | ZL-3421 |
| Certification | CE,ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
PLC Control Furniture Testing Machine Industrial Aluminum Strength Durability
CE Office Furniture Testing Machine Aluminum Frame , Electric lift Seat Impact
PLC Control Chair Swivel Durability Test Instrument , No Impact , Truly Simulate
Office Chair And Chassis With Reclining Function Back Durability Tester
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 60 Sets |
| Delivery Time | 5-8 work days | Packaging Details | IEC 60335 -1 Automatic Pneumatic Reel Endurance Tester for Max. 300cm Reel is packaged within wooden case. |
| Product name | IEC 60335 -1 Automatic Pneumatic Reel Endurance Tester for Max. 300cm Reel | Power supply | AC220V 50Hz |
| Working air source | Compressed air 5~7kg/cm2;(air source provided by customer) | Driving mode | Pneumatic (compressed air) mode |
| Angle | adjustable from 30 to 70° | Stretching stroke | Maximum 1000mm(adjustable) |
| Brand Name | ZL | Model Number | ZL-3421 |
| Certification | CE,ISO | Place of Origin | China |
| High Light | furniture testing equipment ，furniture tester | ||
IEC 60335 -1 Automatic Pneumatic Reel Endurance Tester for Max. 300cm Reel
Product introduction:
The automatic winding machine is designed and manufactured according to the requirements of GB4706.1 :22.16 and iec60335-1:22.16. It is a special testing equipment for testing whether the structure of automatic winding machine for household and similar electrical appliances has excessive scratch or damage of flexible flexible wire sheath, broken wire and excessive wear at contact.It adopts multi-function fixture, oversize worktable, and can be used for the test of 300cm reel at maximum, with convenient and adjustable speed (5-30/MIN), strong universality, and suitable for the test of most electrical products.
Working principle:
Pull out two-thirds of the total length of the wire of the reel. If the length of the flexible wire that can be pulled out is less than 225cm, adjust the initial pull length of the flexible wire to make the reel still have 75cm of flexible wire.Pull out another section of cord 75cm long, then roll it back to the direction where the cord sheath will cause the maximum scratch, and pull the cord out taking into account the normal position of the appliance in use.At the point where the cord leaves the appliance, the included Angle between the cord axis during the test and the cord axis when it is rolled back without obvious resistance shall be approximately 60°.Soft wire is allowed to be rewound by a reel.Wind this piece of soft wire 6000 times at a rate of about 30 times per minute or the maximum rate allowed by the reel structure.
Technical parameters:
| Power supply | AC220V50Hz |
| Working air source | Compressed air 5~7kg/cm2;(air source provided by customer) |
| Test rate | 30 times /min (if the allowable rate of the reel structure is lower than 30 times /min, the test shall be conducted at the maximum allowable rate of the reel structure); |
| Test times | 0~9999 times, automatically stop when the test reaches the specified number (adjustable); |
| Driving mode | Pneumatic (compressed air) mode |
| Angle | adjustable from 30 to 70° |
| Stretching stroke | maximum 1000mm(adjustable). |
Company Details
Business Type:
Manufacturer
Year Established:
2014
Total Annual:
1 Million-2.5 Million
Employee Number:
100~150
Ecer Certification：
Verified Supplier
We,Dongguan Zhongli instrument Technology Co., Ltd. Which Located in Dongguan, Guangdong, China. It is a collection development, research, production and sales of test equipment technology company. Companies with technical support, marketoriented, fundamental human. Have a high level of professio... We,Dongguan Zhongli instrument Technology Co., Ltd. Which Located in Dongguan, Guangdong, China. It is a collection development, research, production and sales of test equipment technology company. Companies with technical support, marketoriented, fundamental human. Have a high level of professio...
Get in touch with us
Leave a Message, we will call you back quickly!