Henan Lianghe Pipeline Equipment Co.,Ltd
| Payment Terms | T/T, D/A, D/P, Western Union, L/C, MoneyGram |
| Supply Ability | 6000 set per month |
| Delivery Time | 7-15 work days |
| Packaging Details | Wooden Case |
| Size | DN25-DN3000 |
| Name | DN1800 Limited Tie Rod Rubber Expansion Bellows |
| Rubber material | NR,NBR,EPDM,etc. |
| Standard of flange | ANSI,JIS,DIN,etc |
| Working Pressure | 6-40bars |
| Application | Water Supply/Drainage System |
| Feature | Large Diameter |
| Brand Name | Lianghe |
| Model Number | KDF |
| Certification | ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
DIN Standard PN16 Dn400 End Face Fully Sealed Rubber Expansion Joint Expans
24 Inch Dn600 Flange Zinc Plated Flexible Expansion Joint Neoprene Galvanized
DN1200 PN10 End Face Fully Sealed Natural Rubber Joint With Negative Pressure
BS 4504 DN125 PN16 End Face Fully Sealed Rubber Expansion Joint Forged
Product Specification
| Payment Terms | T/T, D/A, D/P, Western Union, L/C, MoneyGram | Supply Ability | 6000 set per month |
| Delivery Time | 7-15 work days | Packaging Details | Wooden Case |
| Size | DN25-DN3000 | Name | DN1800 Limited Tie Rod Rubber Expansion Bellows |
| Rubber material | NR,NBR,EPDM,etc. | Standard of flange | ANSI,JIS,DIN,etc |
| Working Pressure | 6-40bars | Application | Water Supply/Drainage System |
| Feature | Large Diameter | Brand Name | Lianghe |
| Model Number | KDF | Certification | ISO9001 |
| Place of Origin | China | ||
| High Light | rubber expansion bellows large ，fully seal rubber expansion bellows ，dn1800 rubber expansion joint | ||
DN1800 Limited Tie Rod Epdm Elastomer Large Flexible Rubber Fully Seal Expansion Joint Rubber Expansion Bellows
End-face fully sealed rubber joint
The characteristics of this product are: the flange touches the end face of the sphere, which not only improves the high-pressure resistance of the product, but also plays a good role in preventing it from pulling off.
Installation Notes
1. Rubber joints should be installed according to the natural length of the product, and installation beyond the displacement limit is strictly prohibited.
2. The pipeline must be supported by a fixed bracket or bracket, and both ends of the rubber joint must have a fixed bracket. The closer the bracket and the rubber joint are, the better.
3. The force of the pipe fixing bracket must be greater than the axial force, and the joint must not bear the weight and axial force of the pipe itself.
4. Please install within the allowable value range of the product. Exceeding the range of displacement and deflection will cause the rubber joint to leak or pull off.
5. The bolts should be tightened gradually at the corners. Excessive tightening will damage the sealing surface.
| Main connection dimension | ||||||
| Nominal diameter | Length (mm) | Axial displacement | Horizontal movement | Deflection angle | ||
| mm | Inch | Extension | Compression | |||
| 32 | 1 1/4 | 95 | 6 | 9 | 9 | 15° |
| 40 | 1 1/2 | 95 | 6 | 10 | 9 | 15° |
| 50 | 2 | 105 | 7 | 10 | 10 | 15° |
| 65 | 2 1/2 | 115 | 7 | 13 | 11 | 15° |
| 80 | 3 | 135 | 8 | 15 | 12 | 15° |
| 100 | 4 | 150 | 10 | 19 | 13 | 15° |
| 125 | 5 | 165 | 12 | 19 | 13 | 15° |
| 150 | 6 | 180 | 12 | 20 | 14 | 15° |
| 200 | 8 | 210 | 16 | 25 | 22 | 15° |
| 250 | 10 | 230 | 16 | 25 | 22 | 15° |
| 300 | 12 | 245 | 16 | 25 | 22 | 15° |
| 350 | 14 | 255 | 16 | 25 | 22 | 15° |
| 400 | 16 | 255 | 16 | 25 | 22 | 15° |
| 450 | 18 | 255 | 16 | 25 | 22 | 15° |
| 500 | 20 | 255 | 16 | 25 | 22 | 15° |
| 600 | 24 | 260 | 16 | 25 | 22 | 15° |
| 700 | 28 | 260 | 16 | 25 | 22 | 15° |
| 800 | 32 | 260 | 16 | 25 | 22 | 15° |
Product drawing
| Number | Name | Material |
| 1 | Outer rubber | NR,NBR,EPDM,FKM,Neoprene |
| 2 | Inner rubber | NR,NBR,EPDM,FKM,Neoprene |
| 3 | Pressurized ring | Steel wire strand |
| 4 | Flange | Ductile iron,carbon steel,ss304,ss316 etc |
| 5 | Frame | Nylon cord fabric |
Factory photos
Factory workshop photos
FAQ
Q: Can you provide drawings and technical data?
A: Yes, our professional technical department will design and provide drawings and technical data.
Q: What's the working temperature?
A: The working temperature is -20℃~120℃.
Q: What’s the material of flange?
A: The material of flange can be carbon steel, stainless steel and ductile iron.
Q: Can you provide only rubber?
A: Yes, we can provide only rubber.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
40000000-60000000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
The company adheres to the business philosophy of "customer satisfaction is our first duty, all employees are responsible for creating quality, continuous improvement sets new heights, honest service builds reputation", and wholeheartedly provides high-quality products and profes... The company adheres to the business philosophy of "customer satisfaction is our first duty, all employees are responsible for creating quality, continuous improvement sets new heights, honest service builds reputation", and wholeheartedly provides high-quality products and profes...
Get in touch with us
Leave a Message, we will call you back quickly!