HN-1.5 Inch Rubber Sealing Diaphragm for power plants steel mills metallurgy

Product Specification

HN-1.5 Inch Rubber Sealing Diaphragm for power plants steel mills metallurgy waste incineration

Introduction:

Material:

• Neoprene: an excellent general purpose diaphragm suitable for non-corrosive liquid transport areas such as sewage treatment, tap water or sea water. It is flexible, economical and versatile.

• Nitrile rubber: used for the transport of petroleum and oil liquids, such as leaded gasoline, diesel oil, hydraulic oil, kerosene oil, etc. Transport non-corrosive gravity and consistency of the slurry selection of the diaphragm is better.

• Fluorinated rubber: the best choice of extremely high temperature fluid pump, high temperature resistance of 176 degrees, can also transport some corrosive liquid, such as essence, chlorinated hydrocarbons and strong corrosive acid, alkali and other media.

• EPDM: the best choice for extreme cryogenic pumps, as low as -51 degrees, can also be used to pump dilute acid or low corrosive liquids. Polyperfluoroethylene propylene: high price, strong corrosion resistance, flexibility is better than PTFE, suitable for low temperature corrosive media.

• PTFE: also known as teflon, which has the characteristics of the acid alkali resistance, resistance to a variety of organic solvents, almost insoluble in all solvents, non-stick coating can continuous use at 260 ℃, with a high temperature 290-300 ℃, low friction coefficient, wear resistance and excellent chemical stability. So the PTFE is widely used in the diaphragm pump of a material, of course, the price is also the highest in all materials. Generally used in high temperature and strong acid and alkali and other strong corrosion areas.

Diaphragm pump rubber diaphragm and rubber wrapped diaphragm:

• Diaphragm pump is divided into pneumatic diaphragm pump and electric diaphragm pump, pneumatic diaphragm pump as the name implies is the kind of using compressed air as the power, to form a diaphragm reciprocating deformation volume change of positive displacement pump. Its operating principle and electric diaphragm pump is similar to the plunger pump, because the characteristics of the working principle of the diaphragm pump, in the process of diaphragm pump use, the diaphragm becomes an important accessory, but also because the positive displacement is particularly important.

• Diaphragm pump rubber diaphragm is an important part of the diaphragm pump, if the material choice is incorrect will affect the use of the effect. The diaphragm is also a wearing part, which should be replaced frequently. We first need to understand the material of the diaphragm, which are mainly used in what occasions.

• Diaphragm pump rubber diaphragm has the characteristics of high temperature resistance, low temperature resistance, corrosion resistance, high tensile strength, fatigue resistance, high frequency movement resistance. Generally speaking, more than three physical properties of rubber diaphragm has been better. At present, there are few rubber manufacturers with high temperature resistance, low temperature resistance, corrosion resistance, tensile strength, fatigue resistance, high frequency movement resistance and other characteristics on the market, HF(Hanfeng) is one of them.

• Pneumatic diaphragm pump sheet material is divided into: neoprene rubber, nitrile butadiene rubber, fluorinated rubber, EPDM rubber, Polyperfluoroethylene propylene, Teflon and so on.

• Pneumatic diaphragm pump diaphragm usually uses NBR rubber or natural rubber, the cause of choosing the above two kinds of rubber on the one hand because of high cost performance, on the other hand is because the material characteristics of two kinds of material conforms to the production environment, such as oil resistance, abrasion resistance, etc., can effectively deal with this kind of environment in the case of diaphragm caused by corrosion, wear and tear, The pneumatic diaphragm can effectively extend the service life.

• The rubber wrapped diaphragm is made of various rubber materials and nylon cloth. Special adhesive is used in the bonding process to ensure the bonding strength and firm adhesion in the working process. Compared with the pure rubber diaphragm, the performance improvement of the rubber wrapped diaphragm has been verified by the actual experiments of customers and is highly appraised by the industry. Therefore, in the subsequent production process, the customer will request the diaphragm produced by the cloth clip process. Therefore, the application of rubber wrapped diaphragm in the pump and valve industry is more and more widespread, such as electromagnetic pulse diaphragm dust removal industry, metering pump diaphragm and diaphragm pump diaphragm beverage pharmaceutical industry, as well as steel, chemical industry, coal mine and other industries.

• Rubber cloth materials are nitrile rubber cloth, natural rubber cloth and neoprene rubber cloth. Specific cloth types and cloths can be customized according to customer requirements.

Our service:

1. Packaging is neutral packing or customized packing.

2. We will reply you within 24 hours.

3. We will also provide you with good after-sales service.

4. OEM or ODM orders are welcomed.

5. Trial orders are acceptable.

6. High quality and factory price.

7. 100% ensured the quality.