500LPH EDI Water Treatment System One Stage Reverse Osmosis

Product Specification

500LPH One Stage Reverse Osmosis With EDI Water Treatment System

Technical Descriptions of EDI Water Treatment Plant

RO & EDI

RO(Reverse Osmosis), the basic working principle is:using of a special high pressure pump, increasing pressure to raw water, then force raw water penetrating through reverse osmosis membrane under the pressure. Only water molecules and solvent less than microns
can pass through the RO membrane.

EDI (Electrodeionization) is a revolutionary water treatment technology ,it is a membrane separation desalination technology that skillfully combined the electrodialysis technology and ion exchange technology together ,which is high-tech , green and environmental protection technology. EDI plant has very high requests to raw water, usually we use double stage RO system production water as its raw water.

Product Technical Parameters of EDI Water Treatment Plant

Process Characteristics of EDI Water Treatment Plant

Using bipolar reverse osmosis +EDI electric deionization process, high desalination rate, stable effluent water quality, reliable performance, to a large extent to ensure the stable operation of the system.

PLC combined with man-machine interface automatic control, touch screen one-button start, simple and convenient operation, clear picture, exquisite and beautiful.

Water quality correction function, low use of water quality warning function, never appear emergency state.

Equipped with purified water delivery water supply system, and the water system and water supply system separate control, such as replacement of supplies, you do not have to stop the water supply or water.

RO and EDI water production and flushing time can be set. When the water is in peak, the water production time can be adjusted and the water point can be used to stabilize the water consumption.

Advantages of EDI Water Treatment Plant Compared With Traditional Mixed Bed:

The advantages of continuous desalting by electrodialysis and deep desalting by ion exchange are retained;

Compared with ordinary ion exchange resin column, the amount of ion exchange resin is less, saving more than 95% of resin;

Ion exchange resin does not need acid and alkali chemical regeneration, saving a lot of acid and alkali and cleaning water, greatly reducing labor intensity;

No waste acid waste lye discharge, is clean production technology, green environmental protection products;

The process is easy to realize automatic control, EDI and reverse osmosis (RO), UF and other water treatment technology combined, can form a perfect high pure water production line;

Small footprint, and do not need to be like ion-exchange beds, a set of in-use, a set of regeneration of the repeated Settings.

Application of EDI Water Treatment Plant

Electronic chip high pure water;

Power high pressure boiler supply water;

Chemical, metallurgy, electroplating and other industries pure water, high pure water;

Biotechnology, pharmaceutical industry, medical devices, experimental technology ---- pure water, high pure water.

Workflow Chart of EDI Water Treatment Plant

Actual Picture of the Project of EDI Water Treatment Plant

EDI Modules

Jufu's Five Guarantees

Focus on water treatment industry for 14 years, High quality with stable performance.

ISO9001 Quality System Certified.

Provide Water Treatment Solutions free of charge.

Onsite installation service is available.

Lifetime after-sales service available.

FAQ:

Q: What’s the type of your company? Manufacturer or trade agent?

A: We are a high-tech manufacturer engaged in water treatment industry for nearly 20 years, specializing in water treatment, water purification equipment and technology research and development, manufacturing, sales, engineering installation and consulting.

Q: What information do I need to provide when choosing a product?

A: What is your water source?

If possible, please provide water quality analysis report, so that we can recommend the most suitable product and customize the most suitable solution for your project.

B: What is your capacity requirement for the equipment?

C: What are the applications for the program?

D: What are your local plumbing standards?

E: Do you need on-site installation instructions?

Q: Which machine should I choose?

A:It depends on your raw water quality and your requirements for permeate water.
Usually there are three parts: pretreatment, RO machine, and post treatment. Pretreatment could be UF(ultra filtration) system, anti-scale dosing system, flocculant dosing system, disinfectant dosing system, water softener, sand filter, carbon filter, security filter etc. Post treatment could be UV sterilizer, Ozonizer, ClO2 sterilizer, etc. And maybe you need an EDI system. We will choose proper process according to your raw water quality and permeate water purpose.

Q: What are your payment terms?

A: Deposit in advance and the balance before delivery. According to the specific requirements of the project.

Q: What is the lead time?

A: Typically, the production cycle is 3-5 weeks, depending on your project.

Q:What after-sale service can you provide?

A:Pick up Service ,100% factory tested before shipment,1 Year's Quality Warranty,Solve problems within 24 hours,Technical support&online support.