Reverse Osmosis Ro Water Treatment Plant Machinery System 250LPH 0.25ton 1500gpd

Product Specification

250LPH 0.25ton 1500gpd Reverse Osmosis Ro Water Treatment Plant Machinery System
 
Product Introduction of RO Water Treatment System
1.The reverse osmosis device is an equipment to purify the saltine water with the action of pressure difference of semi permeable
membrane. It is called reverse osmosis, as it is counter to natural penetration direction. Different materials have different
osmotic pressures.
2.The reverse osmosis method to adopt larger osmotic pressures is used to obtain the purpose to separate, extract, purify and
condense.
3.More than 97% soluble salts and 99%glues, microbe, particulate and organic substances and etc can be removed with the reverse
osmosis.
4.It becomes the most idea equipment for the modem program of pure water, hyper pure water, and airspace water. The remarkable
characteristics of the equipment are shown as lower energy consumption, no pollution, simple techniques, high water quality, easy
operation and maintenance.

Advantages of RO water treatment system:
Technical Features:
1. American ultra-low pressure roll-type composite reverse osmosis membrane with high desalination rate and low operating pressure, excellent water quality, low operating cost and long service life;
2. High-efficiency, low-noise, high-quality high-pressure pumps;
3. The online product water conductivity meter can monitor the water quality at any time;
4. The product water and concentrated water are equipped with flow meters to monitor the water output and recovery rate of the system;
5. Pressure gauges before and after the fine filter, and pressure gauges before and after the reverse osmosis membrane can continuously monitor the pressure difference between the reverse osmosis membrane and the fine filter, prompting when to clean or replace;
6. The high pressure switch protects the reverse osmosis membrane from damage due to excessive pressure;
7. The low-pressure switch protects the high-pressure pump from damage due to water supply stop;
8. The stainless steel regulating valve adjusts the water output and the system recovery rate at any time;
9. The standard program automatic control system can reduce the membrane fouling speed, prolong the service life of the membrane, and ensure the stable and reliable water quality of the system effluent.
 
Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter (quartz sand filter) → Activated carbon filter → Soft water processor → Precision filter → High pressure pump → Primary reverse osmosis (RO) device → Purified water tank → High pressure pump → Two Stage reverse osmosis → ultraviolet sterilization device → water point.
 

 
Photos of Reverse Osmosis Water Treatment System


 


 


 


 
FAQ:
 
1. What is the design water yield of ro membrane element? (except anti-pollution membrane and seawater desalination membrane)
 
Model 4040 is designed by 0.25m3/h
 
Model 8040 is designed by 1-1.2m3/h
 
2. What is the material of mechanical filter?
 
Carbon steel, stainless steel, fiberglass
 
3.What are the multi-way control valves?
 
Manual control valve, automatic control valve
 
Multi - way control valve is divided into: filter valve and softening valve
 
Automatic control valve is divided into: time type and flow type.
 
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean source, etc.