Large Seawater Reverse Osmosis Plant Desalination RO System

Product Specification

Large Seawater Reverse Osmosis Plant Desalination RO System
 
What is the Seawater Desalination RO System?
 
The reverse osmosis(RO) process is the core process of seawater desalination and is mainly used to treat the salt water with high TDS than 10000ppm. It consists of a High pressure pump followed by an Energy Recovery device and the Reverse Osmosis Membranes. In this process sea water is forced against semi-permeable membranes under pressure in a continuous flow condition. The high salt content of sea water requires that the operating pressure for Reverse Osmosis must be between 60-70 bar. As the water permeates through the membrane most of the dissolved impurities removed and 99.5% of the total salt is removed. The impurities are left behind in the flowing water and the concentrated stream from the membranes is discharged to the ocean.
Raw water: Seawater TDS more than 20000ppm;
Capacity: 1000GPD or according to customers's requirements;
Output Water Application: Who drinking water standard, or according to customer's requirements.
 
Seawater Desalination RO System Specifications

Working Process of Seawater Desalination RO System

Raw water pump→ mechanical filter(quartz sand filter)→ activated carbon filter→sodium-ion exchanger(water softener)→ security filter→ high pressure pump →Reverse osmosis→ Ozone sterilizer (UV sterilizer)
 

 
How Does a Desalination System Work?
 
The high salt content, high hardness of seawater, strong corrosiveness to equipment, and seasonal changes in water temperature make the reverse osmosis seawater desalination system much more complicated than the traditional brackish water desalination system, and the engineering investment and energy consumption are much more higher. Therefore, it is particularly important to reduce the project investment and energy consumption through careful process design and reasonable equipment configuration, thereby reducing the unit cost of water production and ensuring the stable operation of the system.
 
1000L Seawater Desalination Machine Performance Characteristics
 
1. Using ozone disinfection device, the disinfection effect is good;
2. Imported reverse osmosis membrane, reliable quality, long service life, low energy consumption and stable effluent quality;
3. It adopts imported automatic control valve and microcomputer control component, fully automatic operation, simple to use, safe and reliable operation;
4. The water-passing parts are made of stainless steel, FRP, etc. The water storage parts are fully sealed stainless steel water tanks. The water supply equipment uses stainless steel pump frequency conversion water supply, which is not only corrosion-resistant and durable, but also clean and hygienic, and will not cause secondary pollution to water. After the water that cannot be used by the pipe network flows back to the clean water tank, it must be activated again, and then it will be supplied to the user after disinfection, completely eliminating the stagnant water;
5. Modular design, water, water storage, water supply, cleaning, organically designed into one, easy to install and use;
6. Water production: 0.2-100m3/h, water production rate 50-75%;
 
Material of Reverse Osmosis System?
 
We have different material for different application. Before choosing RO system please contact with our pro-fessional technical service.
- Tanks: SS304
- Pipes: SS304
- Frame: Stainless Steel 304
- Filter Housing: SS304
- Membrane Housing: FRP
 
Product Details