1 Core Components 0.5 Ton Reverse Osmosis RO Water Treatment Equipment For

Product Specification

1 Core Components 0.5 ton Reverse Osmosis RO Water Treatment Equipment for Industrial Pure Water

Description

Purified water equipment is used to meet the multi-industry for the production of purified water equipment, mostly used in medicine, biochemistry chemical industry, hospitals and other industries, the entire system consists of pre-treatment unit, dual-stage reverse osmosis unit, EDI electro-desalination unit (depending on the requirements of the optional), aseptic water storage and delivery unit, sterilization and disinfection unit and other modules, the parts that contact the product water required to use health-grade SUS304L or SUS316L stainless steel. The core technology of the purified water equipment adopts RO reverse osmosis, EDI and other new processes, and designs a complete set of treatment processes for the product water quality requirements to meet the purified water production and water requirements in the fields of pharmaceuticals, biochemical products, in-vitro diagnostic reagents, medical supplies and devices, hospitals and so on.

Parameter Table

Process flow

(the process flow can be customized according to the user's water level)
Raw water - Raw water pressurized pump - Multi-media filter - Activated carbon filter - Water softener (or scale inhibitor and dosing device) - Precision filter - First booster pump -Primary reverse osmosis - PH adjustment - intermediate tank (optional) - secondary booster pump - secondary reverse osmosis - EDI device (depending on the level of water quality and choice) -Purified water aseptic tank - pure water pump - ultraviolet sterilizer - microporous filter - circulating pipeline and water point EDI - ozone disinfection - circulation Into the aseptic water tank

Manufacturing standards

1,Automatic control, simple and convenient operation; structural design should be simple, reliable, easy to disassemble.

2, in order to facilitate disassembly, replacement, cleaning parts, the implementation of the implementation of the design as far as possible using standardized, generalized, systematic parts.

3, equipment contact with product water devices inside and outside the wall surface requirements of smooth and flat, no dead ends, easy to clean, sterilize. The surface of the device should be corrosion-resistant, prevent rust, avoid the use of paint to prevent peeling.

4, the preparation of purified water equipment should be used low-carbon stainless steel or other verified not to contaminate the water quality of the material. Preparation of purified water equipment should be regularly cleaned, and the cleaning effect of verification.

5, water for injection contact materials must be high-quality low-carbon stainless steel or other materials that have been verified not to pollute the water quality. Preparation of water for injection equipment should be regularly cleaned, and cleaning effect verification.

6, purified water storage cycle should not be greater than 24 hours, its tanks should be sanitary stainless steel materials or verified non-toxic, corrosion-resistant, non-leakage of contaminated ions of other materials made. Protection of its air vent should be installed without shedding fibers of hydrophobic sterilization filter. The inner wall of the tank should be smooth without dead ends, and the receiver and welds should not have dead ends and sand holes. Mingqingyuan Technology suggests that sensors showing liquid level, temperature pressure and other parameters that do not form stagnant water pollution should be used. The storage tank should be cleaned, disinfected and sterilized regularly, and the effect of cleaning and sterilization should be verified.

 Product  Display