80L Heavy Duty Dough Mixer Machine Commercial Dough Kneading Machine

Product Specification

80L Heavy Duty Dough Mixer Machine Commercial Dough Kneading Machine

This machine is adopts automatic centrifugal clutch principle.The motorgoes positiveand negative to have two different stirring speeds, in order to match up with different processing technological requirements.This machine has a beautiful designed and it

issafety and hygiene. High output.

Main parameters

This machine is a new type of double-acting two-speed kneading machine with gearbox as the main body developed by our factory. Its main features are as follows: This machine adopts the principle of automatic centrifugal clutch, and is controlled by the forward and reverse rotation of the motor. Two different kneading speeds can be obtained to match the different stages of the kneading process. This machine can use single-phase and three-phase power supply, so it is the choice for users who do not have three-phase power supply and want to have variable speed kneading machines. The machine is compact in structure, beautiful in appearance, simple in operation, safe and sanitary, and high in work efficiency.

The scope of use of the dough mixer:
The dough mixer can also be used as a mixer, which can be used to make various pastries, biscuits, bread, steamed bread and other doughs, and can also be used to mix other materials. The kneading machine is suitable for making cakes, desserts, whipping cream, fillings, etc. in restaurants, restaurants, food processing plants, pastry and confectionery factories, restaurants, passenger ships, etc. The kneading machine can also be used in the pharmaceutical and chemical sectors to modulate paint viscosity and mixing Raw materials, reagents, etc.

Installation:
1. Check whether the fasteners of each part of the machine are loose, if they are loose, they need to be tightened
2. Place the machine on a level ground that is not easily accessible to others
3. The grounding mark at the lower part of the machine must be grounded reliably to avoid leakage and injury
4. The user prepares a full disconnection device (such as a knife switch) to connect the machine cable
5. Close the knife switch, move the switch handle to make the machine test run, and the machine can be put into use without abnormal sound.

Operating procedures:

1. Stirring:
Pour the flour into the kneading bucket first, add 50% water for mixing, and mix for about 5 minutes to make up. If the dough and the mixer are rotating together, just sprinkle some dry flour. When the machine is in normal operation, the direction of the auger should be consistent with the direction of the arrow on the belt guard. Note: When the machine is running, it is strictly forbidden to reach in!
2. Take noodles:
After the noodles are combined, disconnect the power, open the cover, pull out the latch, turn the noodle bucket 90 degrees, insert the latch to fix the noodle bucket, and take the noodles. If the dough is too large, use a knife to cut the dough into pieces and take it out. If the dough at the bottom of the dough bucket cannot be taken out, the dough can be sent out by reversing and then take out the dough.

Maintenance procedures:
1. Frequently check the fasteners of various parts during use, and tighten them in time if they are loose;
2. The gear meshing area of ​​this machine is lubricated with grease, and the oil is added once every half month. There is powder in the bearing seat For metallurgical bearings, the oil cup on the bearing seat must be filled twice per shift, otherwise the result of the glue between the shaft and the bearing shell shall be at your own risk;
3. The amount of flour added when mixing the noodles should not exceed the capacity of the noodle bucket, so as not to burn the motor;
4. If oil is found on the dough, it should be repaired in time and the oil seal should be replaced.

Cleaning:
1. The machine should be cleaned in time after use, so as not to affect its reuse;
2. When cleaning, the height of the water in the noodle bucket should not exceed the point of the shaft to prevent water from overflowing from the shaft hole of the noodle bucket or flowing into the interlayer to affect the service life;
3. This machine is a drip-proof appliance, and it is forbidden to clean it with a water spray pipe.

Warning:
1. Cover the machine cover when making the dough, and it is strictly forbidden to reach into the noodle bucket to dial the noodles;
2. If the electrical switch is damaged, it must be replaced by an electrician.