20000L Oil Tanker Lorry 20m3 336hp Watering Cart Vehicle 290hp Euro II

Product Specification

20000L Oil Tanker Lorry 20m3 336hp Watering Cart Vehicle 290hp Euro II

Sinotruk HOWO 6x4 20000L Sprinkler Tank Truck 20m3 336hp Watering-Cart Vehicle

Introduction of Sinotruk HOWO 6x4 20000L Sprinkler Tank Truck 20m3 336hp Watering-Cart

Self-developed heavy-duty vehicles that are in line with international technology and have independent brands and intellectual property rights.

AC16 bridge: The structure of the main reducer is optimized, and advanced structures such as gear large modulus design, reinforced input shaft, and integrated through shaft are realized. Reducer assembly life.

Matching wide-body brake, good braking stability and long life of friction lining. The whole bridge has higher stiffness and strength, strong bearing capacity, large transmission torque, high reliability, and low noise. Selectable speed ratio: 4.77, 5.45, 6.5. Optional ABS, automatic gap adjustment arm, etc. It can adapt to harsh environments such as harsh road conditions and large loads.

HW15710 gearbox: The main box has a double countershaft structure, and the auxiliary box has a planetary deceleration structure, which has a strong bearing capacity and a reliable structure. The combination of forced lubrication and gear splash lubrication provides more adequate lubrication and is suitable for various road conditions. Integrated gear shifting design, clear gears and flexible gear shifting. There are various control modes, which can be single-handed, double-rod or direct control. The main box can take power in neutral.

Cab: The cab body is a solid steel frame structure, which is solid and firm. It has strong resistance to impact and external pressure. The cab manufactured by a welding line composed of international advanced robots is safe and reliable.

Features of Sinotruk HOWO 6x4 20000L Sprinkler Tank Truck 20m3 336hp Watering-Cart

1. Sinotruk Howo flat head chassis, 20-25 cubic tank, power take-off connector, high-power self-priming sprinkler pump, pipe network valve, spray outlet and operating platform.

2. The tank body is made of high-quality WISCO carbon steel sheet (optional stainless steel or glass fiber reinforced plastic). It is formed by a large-scale plate rolling machine at one time. The head and tank body are joined by advanced arc butt welding technology. Platforms, platform guardrails, etc. are reinforced by gas shielded welding.

3. Equipped with a high-power sprinkler pump (the pump can be self-priming and suction-discharging), forward flushing, rear spraying, side spraying, high side shower, rear working platform, with green sprinkler cannons on the platform. ; Can also be adjusted into a mist, range ≥ 15m.

4. According to the user's requirements, it is optional to install or add medicine trays, pumps, anti-corrosion and anti-rust in the tank, multi-directional water inlet and outlet joints, solenoid valves, pneumatic valves, etc.

Specification of Sinotruk HOWO 6x4 20000L Sprinkler Tank Truck 20m3 336hp Watering-Cart

Water pump advantages of Sinotruk HOWO 6x4 20000L Sprinkler Tank Truck 20m3 336hp Watering-Cart

The water pump uses the special sprinkler pump, which has the following characteristics:

1) The input shaft obtains the required speed of the pump through the speed increasing box, and the pump has small volume and light weight.

2) It is a self-priming centrifugal pump with strong self-priming capacity.

3) Simple structure, reliable operation, easy maintenance and high efficiency.

4) The impeller adopts a double seal ring and a flat horizontal hole structure, which reduces the axial force. The Jinan sprinkler increases the bearing life. The shaft seal adopts mechanical seal.

5) Pump parameters: 50/110, speed 1450r / min, flow 50m3 / h, head: 110m, power: 25kw.

Water Tank advantages:
1. The steel plate of the tank body is blasted by a shot blasting machine to remove scale and rust, and to eliminate the stress of the steel, then spray the primer directly. After the tank body is welded and formed, the internal part is derusted, and then the JX-GAB modified heavy anti-corrosive paint is manually applied. The product uses modified polymer resin plus special anti-corrosive materials, and uses a unique curing system to form an interpenetrating network and crosslink The film has good resistance to acid, alkali, salt, oil, water, etc., and has aging resistance, which can greatly extend the service life of the tank.

2. Tank body assembly: The tank body is welded from high-quality steel plates. The cross section of the tank body is oval. The head of the tank body is processed by advanced hemming machine equipment. The tank body is automatically welded at 9 meters. The welding seam is uniform, reliable and firm, and the appearance is beautiful. The tank body is fixed to the automobile beam by "U" bolts through the legs.

The exterior of the tank is sprayed with polyester paint, which has strong corrosion resistance. The liquid tank is sturdy and hermetically sealed, the seal structure is reasonable, the service life is long, corrosion resistance, no deformation occurs, and it has a good sealing performance.