Multi Functional Automatic Hollow Block Making Machine Brick Making Line

Product Specification

Multi Functional Automatic Hollow Block Making Machine Brick Making Line

New SCEC Multi-functional Automatic block forming machine QT6-15A Concrete Block/Brick Making Line Machine Making Hollow brick 1260pcs/hour

Introduction of QT6-15A Automatic Concrete Block/Brick Making Line

QT6-15A automatic block forming machine is improved on the basis of QT6-15C block forming machine. It adopts optimized design, reasonable post-holiday, forced cloth, accelerated vibration molding. It is a set of block forming machine that integrates efficiency, economy, and suits the national conditions.

Name: QT6-15A Automatic Block Making Machine

Model: QT6-15A

Configuration: 1 host, 1 6-meter double-layer conveyor belt, 1 hydraulic station, 1 power distribution box, 2 JS500 mixer hydraulic forklifts

Manufacturer: SCEC

Technical Specification of QT6-15A Automatic Concrete Block/Brick Making Line

Technical functions of block forming machine:

1, QT6A-15 full-automatic block forming machine can produce standard bricks, hollow bricks, porous bricks and other machines for multiple purposes.

2. The block forming machine converts the excess oil into vibration force when pressurized, and the computer controls directional vibration, frequency conversion, braking and eliminates vibration energy consumption.

3. The low-frequency feeding and high-frequency vibration of the block forming machine, and the combined compression of the table mold make the concrete fully liquefied and exhausted in two to three seconds to achieve high density and strength, which is particularly suitable for the production of high-strength blocks. Stackable.

4. The QT6A-15 block forming machine is stored by the photoelectric control host, and the materials are delivered immediately, avoiding the effects of aftershocks, and some concrete is liquefied in advance.

5. A swing type unloading device is installed in the hopper, and the material is evenly fed into the mold box by adjusting the swing fork. Imported electrical and hydraulic components make the control and hydraulic systems basically trouble-free. Dozens of formulas stored in the computer can be called at will. Dozens of mechanical actions required for different products can be adjusted. Just add or subtract according to the menu without professional. personnel.

Production scale of block forming machine:

We divide the production site into five functional areas including office area, production area, raw material storage area, product maintenance area, and finished product storage area. Staffing requires 8 people. The total area of the site is not less than 3500 square meters. among them:

(1) The office area is about 300 square meters, including four offices, staff quarters, canteens, doormen, garages, etc .;

(2) The production area is about 1,000 square meters, and the distribution materials are stirred, pressed, and cured;

(3) The raw material storage area is about 1,000 square meters, which is divided into main materials, auxiliary materials and additives;

(4) about 200 square meters of palletizing and packaging area;

(5) The finished product storage area is about 1,000 square meters.

Supporting facilities for the production of block forming machines:

1. The supporting facilities for production facilities mainly include buildings such as water, electricity, roads and factory buildings.

2. The production site building can adopt steel frame structure, building level two, fire resistance level two, seismic intensity and dominant wind direction are designed according to the relevant specifications of the user's country (region) and geological, hydrological and meteorological conditions, and the lighting and ventilation conditions are good; Lightning level two, its lightning protection device uses a lightning protection strip, and the down conductor is connected to the ground electrode.

3. Water for domestic and firefighting is introduced from the water supply network, the main pipe diameter is more than Ø63mm, and water meter measurement is set at the same time.

4. The production water comes from rivers or groundwater. The production and domestic sewage are processed centrally and enter the sewage pipe network.

Ground hardening treatment for non-building factories, concrete pouring 150 ~ 200mm.

5. The power supply is divided into external power supply and internal power supply. The total power of the production line is 230KW and the transformer capacity is 300KVA. The power supply adopts ~ 380/220 three-phase four-wire neutral point direct grounding power supply.