Fully Automatic Cement Block Machine Brick Making Equipment 4 Pcs/Mould

Product Specification

Fully Automatic Cement Block Machine Brick Making Equipment 4 Pcs/Mould

SCEC Fully Automatic Hydraulic Concrete Block Making Machine QT4-15 Brick Production Line 4pcs/Mould

Features of SCEC Fully Automatic Hydraulic Concrete Block Making Machine QT4-15

QT4-15 full-automatic hydraulic block forming machine adopts hydraulic transmission, which runs smoothly and reliably. Hydraulic pressurization combined with vibration forming, the block density is large and the quality is good.

The equipment structure is simple and practical, and the appearance is novel and beautiful. In addition to producing permeable bricks, it is particularly suitable for the production of standard bricks. Changing the mold can also produce a variety of floor tiles, hollow bricks, roadside stones, etc.

Reasonable raw material ratio can produce high-strength standard bricks, which can be palletized immediately after forming.

Technical advantages of SCEC Fully Automatic Hydraulic Concrete Block Making Machine QT4-15

1. Separation and quantitative feeding of storage hopper and supply hopper:

In the traditional molding machine, the storage and supply of the concrete mixture is realized by the same hopper and is close to the vibration source. It is susceptible to the effects of aftershocks. It partially liquefies the concrete in advance.

QT4-15 block forming machine adopts separate storage hopper and supply hopper. The storage hopper (about 500 liters) is far from the vibration source and adopts vibration isolation measures. The material is quantitatively transferred to the supply hopper through a closed belt, which is controlled by a quantitative switch. Feeding hopper on the line (the amount of material can be adjusted).

2. Forcible feeding device:

Due to the thin thickness of the concrete porous brick ribs (generally 13-16mm), it is difficult to add the material evenly into the mold box by the traditional feeding method. The QT4-15 block forming machine uses a forced feeding system (multi-row mixing forks are installed in the distribution box). When the distribution box is sent above the mold box, the mixing fork swings to force the feeding of the mold box, which can ensure the feeding speed and can Make the whole mold box evenly fed.

3. Excellent vibration system:

The main vibration system of the QT4-15 block forming machine is a frequency-variable amplitude-modulation vibration system (frequency-changeable amplitude-changeable belt pulley) composed of a vibration motor and a vibration box. In addition, a special vertical directional vibrator is mounted on the indenter to form composite vibration. When the molding machine is working, the demolding cylinder is locked on the vibration table to achieve the table mold vibration. In addition, the main vibration system can convert the frequency and adjust the amplitude and the head to vibrate, which not only ensures the molding of different performance mixtures but also different specifications. The products are fully compacted in a short period of time, with high efficiency and low energy consumption.

4. Intelligent control

Affected by changes in dry and humidity of the material and aggregate, the concrete materials are not the same after mixing. Under the premise of ensuring product quality, set the molding parameters and the most conservative molding parameters of the product. If the upper limit is exceeded, the feed will be automatically reduced. This machine also has the functions of real-time dynamic display of mechanical actions, self-checking of faults, display of input, output of fault location and so on.

5. Effective work surface

Because the design adopts new vibration technology, the effective vibration molding area can reach nearly 0.5m2 (850 × 550mm). It laid a solid foundation for the formation of concrete porous bricks for large-scale production.

6, Multi- functions

One machine is multi-purpose. Changing the mold can produce various specifications of wall blocks and pavement bricks, slope protection bricks, square tiles, grass planting bricks, grate bricks, and facing bricks, roof insulation bricks, etc. One machine can fully meet the market Demand on various blocks.

Detail technical parameters of SCEC Fully Automatic Hydraulic Concrete Block Making Machine QT4-15

Production performance:

Highlights of SCEC Fully Automatic Hydraulic Concrete Block Making Machine QT4-15

1. The electrical system adopts imported color touch screen and programmable controller PLC control equipped with data input and output devices. The control system includes safety logic Edit control and fault diagnosis system.

2. The imported hydraulic components and seals adopt high dynamic performance proportional valves, which can adjust the oil volume and pressure according to different working requirements,

Control the movement of key components.

3. The machine body is made of high-precision, high-strength castings and special welding technology and materials, which has good rigidity, vibration resistance and long life.

4. The machine adopts a four-bar guiding method to ensure the precise movement of the indenter and the mold.

5. The machine adopts table top vibration forming, and adopts reciprocating guide feeding device. The forming cycle is short, the production efficiency is high, and the block quality is dense and strong.

High degree and precise size.

6, using the integration of machinery, electricity, and hydraulic technology, so that each cycle of equipment operation is consistent, so the molded product has high stability, low scrap rate.

7. Multi-purpose machine can produce porous bricks, hollow blocks, curbstones, pavement bricks, planting tree bricks and slope protection bricks with different specifications by changing the mold. And other cement products.

8, with fabric device can produce products such as colored pavement tiles.

Our Service

Pre-Sales Service

* Inquiry and consulting support.
* Sample testing support.
* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.